I am new to LabView. I need an example VI for doing RF third intermod measurements.

I am using 2 Anritsu 2-40 GHz, and an Agilent Spectrum analyzer. I am in need of an example VI to get me started, since a am new to LabView.

Thank You Aaron.
Once initialized, the program will write instructions to, and read data from 2 Signal Generators, and 1 spectrum analyzer via GPIB. The comment is best left in an example format:
Example:
Measurement of third intermodulation distortion from 8.5 to 9.0 GHz at 0 dBm. Commands will be sent to Sig Gen A to go to 8.5 GHz CW (0 dBm power level), Gen B will go to 8.51 GHz (0 dBm power level). Commands will then go to the spectrum analyzer to set center frequency at 8.505 GHz, set span, set RBW, and set ampiltude. Next the spectrum analyzer will be commanded to do a peak search on the largest carrier (they should be fairly equal), set a marker, then do a delta marker at 8.52 and compare with another delta marker at 8.49 GHz and report the
smallest delta between the two main carriers (8.5 and 8.51 GHz). Hence, the 3rd intermods will be present at 8.49 and 8.52 GHz. Their levels are to be reported in dBc in reference to the main carriers. The action will be repeated at the next frequency point(s).
All will be communicated over GPIB. No additional hardware needed at this time.
Performance can be tweaked. This is an RF R&D environment. I figured (and know)that someone out there has done this before and may could give me a "jump start".

Similar Messages

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

I'm about to hulk out guys! Brand new iPhone 5 and need to update iTunes for recognition. Keep getting "the installer encountered an error that caused the installation to fail." Can anyone help? I may smash something very soon.

iTunes:
AppName: itunes.exe
AppVer: 10.5.0.142
ModName: unknown
ModVer: 0.0.0.0
Offset: 001be6f6
Quicktime:
EventType : BEX
P1 : QuickTimePlayer.exe
P2 : 7.71.80.42
P3 : 4ea5c6ef
P4 : QuickTimePlayer.dll
P5 : 7.71.80.42
P6 : 4ea5c6d5
P7 : 00005b6d
P8 : c0000409
P9 : 00000000
That's consistent with another application (other than QuickTime) having dropped old QuickTime componentry in non-standard locations on the PC.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view options on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in My Computer, open your C drive.
Open the "Windows" folder.
Open the "system32" folder.
What files and/or folders can you see in there with QuickTime in the file/folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

I purchased keynote for my new iPad do I need to purchase keynote for my iMac? When I try and purchase keynote for my iMac I am told that "you have already purchased keynote, do you want to purchase it again?" Answer NO. I try to open the keynote app

I purchased keynote for my new iPad do I need to purchase keynote for my iMac?
When I try and purchase keynote for my iMac I am told that "you have already
purchased keynote, do you want to purchase it again?" Answer NO. I try to open the
keynote app on my iMac and it asks "do want to buy iWork again?" answer NO. Then the keynote app
closes. What an I to do?

Call the apple store you got it from and ask them. Sometimes in the past they've extended the 'no questions asked return' but only Apple can tell you for sure.

Just got 4 new iPads, Do I need separate Apple IDs for each one?

Right now I have 3 iPods and 2 iPhones connected to my PC using 1 Apple ID.
Question: I just purchased 4 new iPads. One of the iPads is for me and the 3 others are for my children. Should I setup the 4 new iPads under my existing Apple ID or should set up a new Apple ID for EACH of the new iPads?

It would be a good idea to set up separate apple ID's for each. One reason is just to avoid any confusion over anything such as icloud synchronisation. Spending on your credit card so maybe purchase gift cards for their accounts so they have some money to spend on apps. It could cause a few problems mainly due to icloud, photos syncing, password synchonisation and it only takes a few minutes to set up an account. If you don't want to put a credit card on their accounts you can set it up without an account but i'd suggest using a computer to set it up as in my experience i couldnt set up an account without a card on an iphone or ipad etc.
you could put your card on their ipads and enforce a restriction on buying apps where you would need to enter a code to authorise it.
Hope it helps

Need an example code for IMAP

Hello friends,
I need an example of IMAP using Javamail to retieve new mails from an INBOX .Pls send me an example if u have any .Or suggest me the site where i can get an example on it.

Hi,
I suggest to look at the demo files in the javamail package.
I think msgshow.java is a good example.

Need an example program for function module

Hi ,
I am new to ABAP. Can you please give a simple example program to extract the data from a table using Function module.
Thanks for your help in advace.
Regards,
Vishnu

hi vishnu,
See the following Sample Program;
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
      wa   LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
     EXPORTING
          id        = carrier
     IMPORTING
          itab      = jtab
     EXCEPTIONS
          not_found = 1
          OTHERS    = 2.
CASE sy-subrc.
WHEN 1.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
    MESSAGE e888(sabapdocu) with 'Error in function module'.
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
Also you can find example programs for all in tcode ABAPDOCU in your SAP system itself, explore ABAPDOCU to find more sample programs....
Regards
Karthik D

North New Jersey - LabVIEW Programmer Needed

Instrumentation Engineering, LLC is looking for an experienced Test Engineer who is proficient in LabVIEW and systems integration. 3-5 years experience preferred. Competitive salary and benefits.
Instrumentation Engineering is located in Oakland, New Jersey and has been in business since 1969. IE is a engineering company whose sole focus is ATE Systems design, fabrication and integration.
We currently have one opening in the Engineering department and are currently accepting Resumes.
Please email your resume to:
David Rosenthal
Vice President
Instrumentation Engineering
http://www.ietest.com
[email protected]

I'm moving to PA soon, not too far from the Jersey border (Tamaqua, PA). I might be available for work. It's unlikely that I would need to actually go to your site, although I can make myself available if need be.
John Wilson
[email protected]

I need to ask a new question, but I need to include images for a better explanation, what source do you recommend?

Hello everyone,
I need to ask a new question, but i would like to do it more illustrative, showing some images, I am new on this forum and I would like to follow the best practices and standards on how to ask a "picture" question, is there a way i can refer to
a source? i tried Instagram in the past is that ok?
Thank you.

After your forums account is verified, you can directly post/upload pictures into your posts, using the editor toolbar in the question/reply. This forum limits to two images per post/message.
you can request your account be verified, by adding on to the thread here: (Verify your account NN)
http://social.technet.microsoft.com/Forums/en-US/home?forum=reportabug
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

LabView programmer needed to develop VIs for two immediate projects in Belmont NH, apply ASAP.

Projects are relatively small: first one is for a testing machine with data aquisition and control, second is a file storing project.

Dear Sir,
I have been working in development of various project in LabVIEW since more than 5 years. I am attaching my resume with this.
Please do send the project details and requirement, then only we can discuss about pricing and other things.
Thanks & regards,
Rajendra Gaikwad
+91 9663398272
Attachments:
Rajendra Gaikwad CV.doc ‏110 KB

New to flash. Need help defining term for class.

My professor has given us the following definition:
What is the vegetable term within Flash that enables you to
view multiple frames at the same time?
Any ideas? Your help is much appreciated!

Or you could always stop by google and, well, just type in:
flash view multiple frames
"Nickels55" <[email protected]> wrote in message
news:ejsjdg$fsa$[email protected]..
> hahahaha - unreal.
>
> Go ask one of your three classmates that already came
here last week
> asking the same question. Or better yet search for it
yourself.

New developer with spacial - need simple example

Dear All
i developing an application that need to store coordinates which represented with 3 floats. i need simple demo which illustrates me how can i insert such coordinate using Oracle Spatial and the how to select it. i also need little explanation of the structure of the select and insert queries
Thanks alot

Well, Ron, I think you will need to read a minimum in order to use oracle spatial. I admit that the Oracle docset can seem daunting, but I don't think you can use it without at least reading some of the Oracle Spatial Users Guide, available here (file://localhost/D:/Doc/Oracle/1020/B19306_01/appdev.102/b14255/toc.htm) in HTML and PDF.
I suggest reading at least chapters 1 (concepts) and 2 (data types) in this manual.
Albert

Need to install WAS for doing some examples on Java Webdynpro

Hi all,
I just want to do some exaples in Webdynpro and also i want to implement ESS. So Can anybody tell me which version of java sneak preview is to be installed and also from where can i download it?
Thanks in Advance,
Ravi

Hi Ravi,
You can download SAP Netweaver Java 7.0 trail version from the following link. You can use it for your ESS implementation.
https://www.sdn.sap.com/irj/sdn/downloads?rid=/library/uuid/e0576c7e-e306-2a10-37b8-a25d82e6f9d8
Reward points, if helpful.
Regards,
Uday.

Count the number of seeds using labview - new to labview

hello,
I am new to labview and need to create a VI to count the number of seeds being dropped.
I understand you can do this using labview.
please can someone direct me to a tutorial or an example to do this?
I use a camera - how do you connect up the camera to work with labview?
thanks

You'll have to use IMAQ vision, an addon package that brings LabVIEW a series of tools for image analysis.
There are a number of examples/solutions. Some deal already with particle counting.
Although your question is rather vague, I suppose you want to get more info tahn the mere particle number (shape, color). That's definitely possible with LabVIEW, but will require a significant investment.
There is a forum dedicated to Machine Vision where you'll get all the required help.
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...

Need to record data for 4 hrs at a rate of every 30s

Hello,
I'm fairly new to LabVIEW and need assistance. I have this VI that manually records torque and temperature by hitting a button. I want to alter it so that when I run the program I can automatically collect data every 30 sec for 4 hrs and then the program stops. Any help would be appreciated. I have attached the VI.

Bob_Schor wrote:
One of the most difficult things for people new to LabVIEW to avoid is the temptation to "just start coding" -- as often as not, you end up with a bunch of (often Express) VIs wired together that do something, but rarely what you want it to do.
I recommend starting with thinking about the overall design, asking yourself "What do I want to do?". In your case, it sounds like "Record data (not yet defined) every 30 seconds for 4 hours". Now break this down -- what does "record data" mean? How much data? How many channels? What data rate? What do you want to do with the data?
This might be a "unit" of your code, that is, this "Data Recording Block" might, in some ways, stand alone. One way this could happen would be if you recorded, say, 5 seconds of data, wrote the data to a uniquely-named file, then stopped recording. "Aha!", I (don't) hear you saying, "this should be written as a sub-VI called "Save Some Data" that I put in my main program and call every 30 seconds until 4 hours have gone by".
What is this isn't your model? Maybe you want to start data acquisition, keep it running, and every 30 seconds save some aliquot of the data to a file. Fine, but that's another Design Decision that you should make before starting to code. This kind of model sounds liek it might be a Producer (continuous data acquisition)/Consumer (periodic saving of the data) design, with the Consumer "worrying" about saving, say, 5 second aliquots of data every 30 seconds for 4 hours. This last bit (namely getting the Consumer to "do its thing" properly) might be handled by a State Machine design ("Save to File", "Wait for next Sample Time", "Count Elapsed Time").
Here is a piece of Good Advice -- never put an "Abort LabVIEW" command in your program! Notice you have a Stop button to stop the loop, and can OR wire the output now going to the Abort to the same Stop indicator. Use Abort in the rare instance where failure to instantly kill the program will result in someone's death or injury -- you're not yet ready to code at this level.
Bob Schor
To expand on this idea, I usually write up at least a "casual" requirements document - even if it's just a few paragraphs - and code each "requirement" as a subVI.

Need user define function for the message mapping structure

Hi All
I am new to XI.I need the java code for Udf for the following structure.
i have two input and one out put as error.
order_nos----
user define function-------error message
order_details----
num of orders---- i.e. 10
order_details------ i.e. whole order records details
1.i have to compare the 1st input with 2nd one means if the ist input contain 10 means there are 10 orders in 2nd input.if not then i have to give error message .
2.then i have to check the fields in 2nd input has no null values.if no values the output will be error message.
Edited by: Rohit Kumar on Dec 18, 2008 4:43 PM

Hi Sudhir
thanks for your continues help.i need some help so that i can fulfill my requirmrnt
this is my message mapping xml.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:methodCall_MT xmlns:ns0="http://www.dfdsf">
<num_orders>10</num_orders>
<test_mode />
- <order_x> ( which is order details)
<order_id>t78tyu8t</order_id>
<order_date />
<mfg_id />
<catalog_id />
<first_name />
<last_name />
<recipient />
<message />
<address1 />
<address2 />
<address3 />
<city />
<state />
<zip />
<country />
<country_code />
<phone />
<subtotal />
<tax />
<shipping />
<total />
<shopatron_total />
<fulfiller_total />
<shipment_id />
- <additional_info>
<in_store_pickup />
- <express_shipping>
<express_shipping_flag />
<express_shipping_text />
<express_shipping_arrival />
</express_shipping>
</additional_info>
- <discount>
<discount_description />
<discount_percentage />
<discount_total />
</discount>
<lang_id />
<currency_id />
<packing_list />
<num_items />
- <items>
<item_id />
<quantity />
<price />
<part_number />
<fulfiller_total />
<shopatron_total />
- <options>
<option_x />
</options>
</items>
</order_x>
</ns0:methodCall_MT>
this my mapping where under one element number elements are there.when i am excuting the code to check the null value its always giving the there is null val but i have filled evrything.its due to first its checking the order_x and which will be always null.uder this all data will be filled.please suggest what to change in the udf.the code given by u is working fine but its failing in this scenario because it getting the parent filed is null.

I am new to LabView. I need an example VI for doing RF third intermod measurements.

Similar Messages

Maybe you are looking for