I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

never assume or assume their advice works out of the box
install the drivers that they sate is the latests on their site!
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=dk &prodNameId=21861&prodTypeId=18972&prodSeriesId=27901&swLang=8&taskId=135&swEnvO ID=4082

Similar Messages

Error in trying to connect E1000 router to Dell Desktop via ethernet cable.

Connected my Dell laptop to the E1000 using the enclosed disk, easy install and no problems with wireless connection. Created a USB via the install disk to connect the Dell desktop (XP pro SP3). When running installing received error pop up "installation not compete" contact Linksys support for assistance. Disabled all internet connections and tried a manual installation but failed. Any suggestions? or should I just purchase a wireless USB addapter? Thanks for your assistance.

Just connect the computer with an ethernet cable to the router and that's it. No installation necessary.

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

I'm trying to connect my 30" Cinema Display to my new Mac Pro along with a new Apple 23'" monitor. The new Apple monitor is fine. On the cinema monitor everything is blown up pretty large. Any ideas on how to solve this?

The 30" display needs a DUAL-LINK adapter.
<http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I have OSX 10.6.8 with FaceTime 1.0.2. It rings, tries to connect, then fails. Is there an update for Facetime for this OSX 10.6.8?

I have OSX 10.6.8 with FaceTime 1.0.2. It rings, tries to connect, then fails. Is there an update for Facetime for this OSX 10.6.8?

Hi Pam TX,
Thanks for participating in the Apple Support Communities.
If you have FaceTime 1.0.2 on OS X Snow Leopard (10.6.8), you can update to version 1.0.5 to resolve this issue:
OS X: FaceTime calls no longer connect when using Snow Leopard - Apple Support
Install the latest FaceTime update available from the Updates pane of the Mac App Store to resolve this issue.
Cheers,
Jeremy

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

I am trying to connect my blue tooth canon printer with my ipad air?

i am trying to connect my blue tooth canon printer with my ipad air?

The iPad does not support Bluetooth Printers. Headsets, Speakers, Keyboards, Hands Free Devices, In car Madia centers but not Printers.
To use a printer it must be AirPrint Compatible and be on the same Wifi network as the iPad.

I am trying to connect my PSP to the interent via my Wire...

I am trying to connect my PSP to the interent via my Wireless router with no success. Does anyone have any ideas what I can do? The Router is WPA enabled and I've entered the correct key on the PSP but still no joy! help!

hi...let me know the model and the version no. of the router that you are using...also tell me the ISP details, so that i can tell you step by step configuration...

Hi. i am trying to connect a panasonic kx-mb2061 printer/fax via usb cable to my imac. i got as far as the printer browser but can not find panasonic. where is it?

Hi. i am trying to connect a panasonic kx-mb2061 printer via a usb cable to my imac. I got as far as printer browser, but can not find panasonic. where is it?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

I have trouble getting my new Apple TV 2 to work to the internet. I have an Imac with OsX 10.6.8 using a 3G modem to connect to the internet. I have a Time Capsule with Airport. I can't get the Apple TV to see my internet connection

I have an Imac with OSX 10.6.8 dual intel core.
Apple TV 2
Timecapsule
3G modem connected to iMac for internet access.
I have tied to get Apple TV2 to see the inernet but it does not seem to see the inernet connection either via the Airport network or even if I connect it directly with a ethernet cable to the Timecapsule or the iMac.
I have tired to set up Home Sharing but it doen't see the Itunes Store so no go.
I don't have wired internet but it is probably something to do with using a 3G modem
Any tips on how I can check if the TV coonect to internet and what to do about this problem?
I was trying to connect my HD TV earlier using a WiFi USB modem but it could not see my iMac. Apple Support told me to buy an Apple TV but that is not helping as I can't see anything there either.
Regards from Michael

Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
I have reset the printing system, a few times for good measure but nadda.
I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date. I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable. It apparently hasn't worked either
Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac. I am so completely clueless
The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
I think it's the set up of my Mac? Our maybe a glitch in the network settings?
Thanks again

IMac fails to connect to AT&T U-verse via ethernet

I'm not a noob when it comes to my mac, but I don't know much about networking. This problem has me really stumped:
For months, my iMac was connected to my U-verse router via ethernet, by way of my time capsule as a router. Connecting to the internet via time capsule airport works fine. No problems there.
Now, starting about a month ago, my iMac won't connect to the network. When I run network diagnostics, "Ethernet" is green "Network Settings" is Yellow "ISP" is green everything else is red.
In my Network control panel, under ethernet, my status is connected. It says:
"Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
Configure IPv4 is set to "Using DHCP."
Things I've tried are:
-Restarting my computer and both routers.
-Creating a new network location under prefs and starting from scratch.
-Setting my time capsule to "bridge mode."
My setup again is:
2011 iMac
Mac OSX 10.6.8
ethernet to a time capsule
timecapsule ethernet to U-verse router
ethernet connection is down
airport works fine
Thanks for any help you can provide!

Changing the default timeout cannot be done in the Advanced Network settings of Firefox, however if there are some about:config entries that you can check. The features are made available by this add on: [https://addons.mozilla.org/en-US/firefox/addon/tweak-network/] it will allow to change the max connections and prefetching and pipelining.
Otherwise, if you make changes to the advanced settings of how Firefox connects to the internet, restart it for the changes to take affect.
* [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open. Any suggestions.

I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open. Any suggestions.

Resetting Printing System helps OS X recognize new printers.
http://support.apple.com/kb/HT1341
When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

Connecting TC directly to my macbook via ethernet cable

Folks,
I've looked at a number of posts on this topic but I must be missing a step because it is not working. Simply want to do file transfer via ethernet.
so... I connect a ethernet cable from the TC to my Macbook - what do I do next?

dpm,
This works for me when I have to temporarily connect the TC to my Mac via ethernet.
*Create An “Ethernet Only” Location*
While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.
Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
Next, go to System Prefs --> Network.
At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
Now, change “Location” to “Edit Locations”.
Click the “+” button and create a new location named “Ethernet Only”.
Click “Done”.
In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
Verify that “Configure” says “Using DHCP”.
Click "Apply" in the lower right.
You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
Now begin your backup or transfer of files.
You should still have internet access during this period.
Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
Let us know if this resolves your issue.
Cheers!

HT1515 My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

My internet 3rd party access point in in the basement and the speakers I want to stream music to wirelessly are upstairs. Does Airport Express need to be connected to my 3rd party router via ethernet cable or will it stream music wirelessly?

Wirelessly
Just select the option to make your AirPort Express join an existing network in the setup process

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

My July 2009 iMac with OSX Mavericks "iMac is not supported" when I tried to perform bluetooth with my iPhone 5. What is the problem. thanks

Bluetooth is only supported for tethering.
Barry

I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

Similar Messages

Maybe you are looking for