I am trying to screen capture a simulation session in captivate 6 and then edit it in premiere pro cc 2014 when I import the video into premiere, it is blurry

Caveat - I am relatively new to adobe captivate and premiere, so hopefully this is a simple setting issue that I have not been able to figure out. When I do a video capture in captivate 6 the output mp4 is very clear. If I play it in windows media player it is crisp and clear. If I import that same mp4 into Premiere Pro CC 2014, it is very blurry. My simulation has gauges and dials that need to be clear and I need to "mix" audio, narration, and system sounds into this video. Any help would be extremely appreciated!

OK - back to my caveat. When I select preferences in Premiere and look at the playback setting, I get options for Preroll, Postroll, Step forward/back many, mercury transmit, Audio device, Adobe DV and disable video output when in backgroud (all of which I am not smart enough to comprehend).
I apologize for my ignorance. So as I continued to read your question, I, of course googled "how to set playback resolution in premiere pro" and I learned how to do that.... They were set to 1/2. I adjusted to full and it seems to be clear now.... I think you just helped me, help myself. Thank you! Did I get it right? Is there any more you can recommend when it comes to taking a screen capture video and making it into an awesome demo?
Thank you, Thank you, Thank you,
Troy

Similar Messages

TS3355 I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

I loaded video from an external hard drive to my desktop. How do I import the video into iMovie 09? I tried "Import Camera Archive". Didn't work.

It depends on the type of video. iMovie will only import video that it can edit.
In general, you would use FILE/IMPORT MOVIE...

Grey screen when importing HD videos into CS4

hi, im new here and im having a bit of a problem with adobe CS4 Premiere Pro.
i have an Hitachi D60PT HD Digital Camcorder anf i have recently filmed some footage to which im looking to edit together.
ive imported the files into premiere, at first the image was very jumpy since they were filmed at full 1080p HD, so i decided to update premiere to version 4.2. now all im getting is a grey image where the video should be.
i have checked these forums previously and heard you mention gspot to see what codec the video is using and i have checked it out and its saying that the codec is installed. ive tried quick time pro and DivX but after installing the update now thats not even playing them. im lost for answers at the moment and im hoping you guys can help.

since im currently at work i cant post the gspot screenshot yet so i will sort that tomorow
the specs of my laptop are
Intel® Celeron® Processor T3300
- 2.00 GHz
- 800 MHz FSB
- 1 MB L2 Cache
WINDOWS 7 HOME PREMIUM 64-BIT
2GB DDR3 RAM
Hard drive is 400 GB SATA
Graphics card is Intergrated Intel mobile 4 serie
full specs at http://www.currys.co.uk/gbuk/advent-modena-m200-06605481-pdt.html
in regards to the project settings im experimenting, ive been using 720 25fps but im still looking for the correct one.
the codec that gspot is telling me is h2.64 and says it is installed but as i said i will take a screen shot and upload it as soon as i can

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

CRASH REPORT Product: Adobe Photoshop CC Application running on: Apple iMac 3.5GHz / Mavericks 10.9.2 Application crashes without warning. . Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application

CRASH REPORT
Product: Adobe Photoshop CC
Application running on:
Apple iMac 3.5GHz late 2013 / Mavericks 10.9.2
Application crashes without warning. Symptom: Drop down boxes go blank white (I shot screen captures of blank drop down boxes) and application stops working, actions for appox. 10 minutes preceding crash are lost. Force Quit required to quit unresponsive / frozen application and then Restart of Adobe Photoshop CC
Crash Frequency: Three time in this work day, 5.6.14 Once a day sporadically (approximately 10 times) in past two weeks.
Other applications running at time of crashes: Adobe Bridge - NOT effected. Computer was on line with no browsers open.
Otherwise computer continued to operate normally.
I have been using Adobe Photoshop CC for approximately two months.

Thanks, Chris,
I hope that this is the solution.
re: "And a crash report without an actual crash report (a long, detailed text document available from the crash report dialog), is not all that useful" :
I did in deed submit a homemade crash report.
I would have submitted "an actual Crash Report " and sooner, but: When this event occurs. there are NO dialog boxes. All frozen / blank. No possibility of "actual crash report" !
Thank you!

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

I am trying to get a good copy of my home video on DVD using IDVD. On editing the video all the viewing screens show the video perfectly in HD. When I burn the video to DVD all the end results are buzzy with squiggly lines. Any fix? Thanks?

Hi
There are several layers to this Q
A. There are no HD in DVD - DVD is as standard only SD-Video what ever tools used to produce it !
iDVD or DVD-Studio Pro or Roxio Toast™ - will only make SD-Video on DVD
B. DVD can be better or worse
• Using "Share to iDVD" is no good way - Better is Share to Media Browser and as Large (NOT HD as result will be worse)
• Using iMovie'08 or 09 or 11 - are not tools to chose if highes quality is of importance - iMovie up to HD6 or FinalCut any version is far better as they send over all lines to iDVD and not only every second one.
• Using Right encoder quality depending on movie and Manu duration is very important
• Use of high quality brand of DVD - is important - I use Verbatim DVD-R
• Type of DVD - DVD-R plays on more DVD-Players (even old ones)
• Burn speed - I set it down to x4 - resulting in less burn errors - plays on more players
• I secure a minimum of 25Gb free space on Start-Up Mac OS hard disk as iDVD and Mac OS needs this and it can not be taked from other hard disks - has to be here.
• What You feed iDVD does matter
Video codecs
Audio file formats
Photo file formats
Yours Bengt W

My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?

Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

HT4628 My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected

My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected?? Any help out there?

Unfortunately the Netgear DG834N router is rubbish with Macbook Pro's. I've had a few netgear routers, which were all good with my mac, which is why I bought the 'N' series one as an upgrade to the 'G' version, but basically it crashes my Mac constantly. I get the fade up grey screen forcing my to hard power off my book. everything freezes. It plain just doesn't work. wireless 'N' is still just in draft form and the difference between the Netgear and Mac version on the macbook pro just clash. Netgear haven't updated the firmware on the router since last year, so hopefully the will soon, but I've just gone back to my old 'G' version, and stuck the DG834N on ebay. I tried all the configs, with and with out security and no luck, it always disconnected, froze and crashed.

HT4928 THe instructions given to hide apps do not fit with what is coming up on my screen. IT says go to purchases and then click on the x next to the app you wish to hide. There is no x next to the icons on my screen. Please help.

I am trying to hide apps on an iPad, but the instructions given to hide apps do not fit with what is coming up on my screen.
IT says go to purchases and then click on the x next to the app you wish to hide.
There is no x next to the icons on my screen.
Can someone please tell me in easy steps what to do.
Thanks

Reread the instructions. You cannot hide purchases on the iPad itself if you are running iOS 6 or higher. You have to hide the purchases in iTunes on your computer - not on the iPad.
iTunes Store: Hiding and unhiding purchases - Support - Apple

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

When i try to download the newest version of itunes it says "the feature you are trying to use is on a network resource that is unavailable" and then it gives me an alternate path to a folder containing the installation package for itunes64.mis, help

when i try to download the newest version of itunes it says "the feature you are trying to use is on a network resource that is unavailable" and then it gives me an alternate path to a folder containing the installation package for itunes64.mis, help

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.

Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

How can I format an SD card on my mac? I have tried the erase thing but when I put the card into my 35mm camera it says that the card has to be formatted.

I just purchased two new SanDisk 8gb SD cards for my trail cameras. When I put the cards into the trail cameras, the cameras will take pictures but it won't store them on the cards. When I put the cards into my 35mm camera the camera tells me that the cards need to be formatted. I have went through the steps in the disk utilities and erased the cards, which I assume is the same as formatting them?? I have tried this for hours and have had no luck getting these things to work at all. It was awful disgusting when I checked my two trail cameras the first time and found out that they had taken close to 75 pictures but the cards were empty. When I bought my 35mm camera several years ago, I bought a couple of Kodak SD cards and used them right out of the package and never had to do any of this formatting thing. I don't understand what is going on and could sure use some help with this. Thanks for any information anyone can give me with this problem. I would love to have seen what animals set my cameras off 75 times in the last few days. Thanks again.
Respectully
Jim

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

I am trying to screen capture a simulation session in captivate 6 and then edit it in premiere pro cc 2014 when I import the video into premiere, it is blurry

Similar Messages

Maybe you are looking for