I AM TRYING TO SET E MAIL SETTING FOR ATTGLOBAL - ANY CLUES

I am trying to set e mail setting for ipad 2 with attglobal in the UK.
Does any one have any answers ?

Finaly I got some sense and a result
Call number for ATT is 001 877 937 5288
Incoming Server
Host Name is POP4.attglobal.net
User Name is gbinet.*****
Password
Outgoing
Host name -asmtp.attglobal.net
User Name as above
Password.

Similar Messages

Setting up Mail Connection for Infotype Changes

Hello Experts
I would like to set up an email notification which will be sent from the SAP to non HR personnel as soon as a Hire action is completed in order for them to know that there was an employee hired and that they need to enter relevant data in other infotypes.
I found the option to setting up Mail Connection for Infotype Changes but is there a standard way to send a work item notification? maybe add a link to the PA40?
Tx
Maya

No help available out there? If you need it explained clearer just say so and I'll do so. Thanks in advance.

Can you set up mail server for 2 domains?

we have emails using 2 different domains. The first domain has the mail set up on mac server and is running fine. We would now like to add our second email domain to this server as well. Can we do this?

Hmm. Good to know. However, it sounds a little intimidating. I guess it is not a tool you can just launch like Server Admin Tools with a nice-looking user-interface, right? Even though I've installed and ran Windows SBS 2003 since 2003 and just setup a Mac Mini Server, I am not that comfortable when it comes to terminal-level commands, port mapping this, port mapping that, X11, Xcode, etc. Is there a step-by-step configuration guide out there that you are aware? I'll start to look around.

Setting up Mail service for first time

I am setting up an internal mail server for the first time. Some questions:
1) What should my domain and host names be listed as in Mail settings?
2) It appears that the mail is set up by the server as [email protected] How do I get the email addresses such that they don't include the 'server' part?
3) I am using a Time Capsule (similar to AEBS) as a router. Which ports do I need to open to allow mail service?
Thanks!

This is based on my observation not any documentation, so take it for what it is worth. The information that you changed determines what mail the email system will accept and pass on. It passes it on based on the shortnames and nothing else.
The email address that is listed in the account information on Server Preferences determines what shows up as "suggested finishes" when a user starts typing an address in while they are in mail.
The email address that is listed in the users Mail setup info on their machine determines what is shown as a return address when they send mail out. It will show what is there even if the return address has no chance of working.
If you delete all of your users on the server and then reenter them, they will be in correctly on the Server Preferences window, but they are still going to have to be changed on the users machines. I've had some problems with the old setup not working on a user machine even after putting something back in exactly the way it was before, resulting in the need to totally remove the account on the users machines mail setup and reenter it. I really think the quick way, which won't be very quick if you have a lot of accounts is to go into both the Server Preferences and manually change the address there, and they either send the users instructions on how to change it on their machines or go to the machine and change/help them change it there.
There may be a quick way, but I haven't found it.

How do I set up Mail service for simple IMAP with SSL?

This should be easy but something isn't working. I have an Xserve with 10.6. I've enabled the Mail service, and want to add this server as an Account under Entourage. I've put in the IP address, my username/password, etc. but something isn't working. It appears under the Accounts folder tree, but when I try to send an email, I have a window that says "4.7.0 TLS not available due to local problem", Error -17099". I've also seen errors telling me the password is being sent in cleartext and I can't see where I enable the same (SSL, password needed) settings on the client and the server menus. Can someone clue me in - what are the right settings on both ends to have a simple IMAP w/o cleartext passwords? I had this working fine in 10.4 Server... Thanks!
Mike

I see dropdown menus for SMTP SSL and IMAP/POP SSL. I have them both set as "Require"
Do not to this if your server is handling incoming mail from outside your network.
Few remote mail servers will use SSL, so if your server requires SSL then you will not be able to receive mail from outside your domain.
'Use', on the other hand, advertises the fact your server supports SSL, so clients and remote servers can use if if they like, but this still allows other mail in.
What should "Authentication" be - "Login" or "Plain"
Do not use Plain unless you absolutely trust all your clients (i.e. they're all on a LAN or all using SSL). Plain sends an unencrypted password over the wire, which is susceptible to sniffing.
what will the client be using?
Whatever you set it to.
The client complains about a correct root certificate not being installed).
Are you using a self-signed certificate? if so, you're going to get that unless you do a lot of extra work. Getting a real certificate from a trusted authority should resolve this.
As for the slow connections, the use of SSL shouldn't significantly impact connection or delivery/transfer times, so something else is amiss.

Set up Mail service for SMTP only.

I wish to set up the Mail service to act as an smtp server only.
I have FileMaker Server running on this server, on which I am using a plug-in to send mail to my ISP's smtp server. But I am outgrowing my daily sending limits through my ISP (100/day), and would like to run my own smtp server instead.
I have turned on the smtp mail service and it is running, but I'm not sure what credentials I should use to authenticate when connecting to this smtp server...

I have turned on the smtp mail service and it is running, but I'm not sure what credentials I should use to authenticate when connecting to this smtp server...
Why use any?
If the Filemaker Server is inside your network and this server is just acting as a relay for outgoing mail then you don't need authentication at all. Just tell postfix to trust local networks ("Relay mail from the following networks" in Server Admin and add your internal addresses) and you're set.
Since the server won't be accepting mail from outside clients or servers that's all you need to do. There's no need to authenticate since the connection is coming from a trusted network.
If you still do want to use authentication then just provide any username/password combo that is valid for this server. You could even create a dummy account just for this purpose if you prefer.

Automatically set the mail profile for users

Hello all,
Is it possible to set the default delivery profile of all users to email and add the email device as well.
I have integrated OBIEE with LDAP, so I can read all mail adressess of the users.
But for now every user has to 'configure' his own delivery profile.
(I meand the screen when you go to settings -> my account)
Is it possible to set this profile automatically?
can't find anything about this, but I think it is strange that it can't be done...
So hope anyone out here have a good tip for me!
best regards,
Remc0

Hi,
Yes it is possible to have users' email addresses set automatically, it is what the SA System subject area is for. However I am not sure whether it is possible to get the email from LDAP. The only method I am aware of is to have a database table which holds the user's contact details and then set up SA System to use this table. The user will then have a delivery profile called "System profile" and a device called "System email" which will be the default, the email address for this device will be the one from the table and cannot be changed (although the user can override it by creating a new device/profile.
There is a section in this book:
Oracle® Business
Intelligence Server
Administration Guide
Version 10.1.3.2
December 2006
Called
About the SA System Subject Area
Which should point you in the right direction.
Regards,
Matt

How do I set up Mail only for sending? (Don't want to receive messages)

Maybe answer is somewhere on the board but I can't seem to find it...
I think in the past, on older version of Mail, I was able to set up a personal account on my work computer so that I could send from the personal account in Mail. Thing is, I don't want to see or store incoming personal messages (too much distraction at the office!).
Can Mail be set up this way?
If I uncheck "enable account," then I don't see option to send from that account. But if I check it, it shows me incoming mail from the account.
Thanks in advance.

How about Mail -> Preferences -> General: Check for New Messages and select "Manually" from the drop down.
Now Mail won't look for incoming mail unless you tell it to.
Regards
TD

I just loaded Firefox, and the first time I try to open it, I get the message "Your Firefox profile cannot be loaded. It may be missing or inaccessible." I tried deleting and reloading to no success. Any clue about what is wrong?

I downloaded the free Firefox system from the web. I have not been able to open the system since loading it.

I can not find any of the files you address.
I am tying to install Firefox for the first time. SO, if that is the case, how can any of these various files exist? I cannot access the contents of my "Application support" folder.
I have tried to delete Firefox and start over, and the same error message comes up.
I guess my frustration is how can I have a profile if I do not have Firefox installed?

HT5568 I get an error when trying to update Safari - NSURLErrorDomain Error3001.)(102) Any clues as to what this is about???

I have an update notification for Safari under OS X 10.8.2 but I get an error message which says
NSURLErrorDomainError3001.)(102)
Does anyone have a clue as to what this acctually means??
JPY

If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Set up mail server in 11.1.2.3

Hi
I am trying to set up mail server for a planning application 11.1.2.3.Under Administration > Application Settings > Advanced Settings > System Settings tab, I cannot find the Email server option.
Where can i enter the details for email server in 11.1.2.3?

"Administrators must specify the email server details before others can enable email notification. The email server details for approvals notifications come from the EPM Registry, which are set using the EPM System Configurator under Common Settings."
Cheers
John
http://john-goodwin.blogspot.com/

Mail set up on ipad2

trying to set up mail account for the first time and message stating "cannot connect using SSL" keeps appearing and verification fails, all works ok on iphone what else should I try

Do you mean Windows Live mail, the email account provided by Microsoft? Or WIndows Mail the application? If the latter, then you need to specify what email service you're using, since the application you use on your computer really doesn't matter. For basic instructions on setting up mail accounts in your iPad, see:
http://www.apple.com/support/ipad/assistant/mail/
If you mean Windows Live, MSN or Hotmail, see:
http://support.apple.com/kb/ht1694
Regards.

Setting up mail service

I am setting up mail service for the first time. I think that I have everything figured out and set up right, but I'm a novice and don't know for sure.
1) I have not yet asked my ISP to update my MX records because I want to be sure everything is working right first. Is there a way to test the email system prior to making the switch to the MX records?
2) One thing that is puzzling me is that even though I haven't made the MX records switch, to my mind it still makes sense that outgoing mail should work. Is this assumption correct? Yet, when I try to send something from a local user server account through the server's SMTP then the email gets lost. Is this something that will automatically work once the MX records are switched over?
Thanks a million.

MX records have only to do with how other e-mail systems find you. They have nothing to do with outgoing mail at all, except if the receiving system is doing a reverse dns lookup as part of the spam filtering. Try turning your logging level to "Information" and send a test message and look at the smtp logs and see what kind of reply you get from the receiving postoffice.
To do some testing you can use telnet to hit your system from outside and send some test strings/messages. If you do a google search there should be instruction on how to do that. I'd try doing a search on something like "test smtp with telnet".
Message was edited by: WDShepherd

Different mail alerts for each email account

Just got the new Verizon iPhone. Used BlackBerry for years. One feature of the BB that I think is missing from the iPhone is the ability to set different mail alerts for each email account. For instance, I would like to turn off alerts for my corporate Exchange account (for which I get 100 emails a day), but receive alerts for my Comcast and Gmail accounts.
Am I correct that there is only one on or off feature for the iPhone for all accounts?

That turns the account off for receiving mail as you provided, which I'm fairly certain the OP is not interested in.
The OP wants to be able to turn the new mail alert sound off for one account while leaving it on for another account while all accounts are still checked for new messages.
For instance, I would like to turn off alerts for my corporate Exchange account (for which I get 100 emails a day), but receive alerts for my Comcast and Gmail accounts.

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi, I have just set up my domain email address with google and Im trying to set up mail on my mac. Its receiving mail but its not letting me send emails from that address. I have tried quite a few solution but cant figure it out. Can anyone help

Hi Lawrence1981,
Thanks for visiting Apple Support Communities.
You may want to check this article for additional troubleshooting steps:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Cheers,
Jeremy

I AM TRYING TO SET E MAIL SETTING FOR ATTGLOBAL - ANY CLUES

Similar Messages

Maybe you are looking for