I am trying to sort my documents into folders and name each document.  Can this be done

I am new to Pages.  I want to put different letters (documents) into a folder - is it possible to name each document within a folder?
Also, I have blank headed paper that I then pull in to use for letters but I then want to retain the blank headed paper afterwards.  Is there any way of doing that as it appears that once I have used the headed paper for a letter, it gets filed as the new letter and I lose the blank headed paper. 

can this be done
Of course.  That's standard behavior.

Similar Messages

  • I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

    I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

    The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
    When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
    There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
    Apple's instructions for WDS are here if you want to give it a try.
    http://support.apple.com/kb/HT4262
    It is possible that it might work. Keep us posted on your progress
    Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

  • I have transferred all my music from iTunes onto my USB to play on my car audio radio. The radio reads the music but does not play it in sequence. There is a specific way to save the music into folders and name them. I have a Pioneer DEH-2350UBSW.

    I have transferred all my music from iTunes onto my USB to play on my car radio. The radio reads the music but does not play it in sequence. So it plays certain folders, then it skips folders. in certain folders it skips tracks. apparently there is a specific way to save the music into folders onto the USB with regard to naming the tracks and folders.. I have a Pioneer DEH-2350UBSW. Can anyone please help.

    It is a stick, Cruzer Blade 16gig.
    In the manual it says the following about the USB storage device:
    1. Playable folder hierarchy is up to 8 tiers
    2. Playable folders up to 500
    3. Playable files up to 15 000
    Under sequence of audio files it says that the user cannot assign folder numbers and specify playback sequences with this unit. It also gives an example of a hierarchy:
    01 - folder
    Under that is 02 which is also a folder
    Under that are compressed audio files 01 to 05: folder number
    Under that there is another folder same concept as above - I have attached that part of the manual in this response.
    I named my folder - Folder 001 Artists name and then in that folder I added the tracks as:
    001 Song title
    002 song title
    It played the 1st song in the folder and skipped to the next folder, I can't even locate the other tracks.
    On another folder I saved 31 songs but only 29 played so I am not sure whether there is a limit.
    All I need is an example of how to number and name everything.

  • How to classify a Document into Category and subcategories

    Hi,
    We have a fully functional basic KM system where we upload documents into folders and subfolders. Now we have a requirement to classify the documents into categories and subcategories at the time of uploading the document. This classification will be irrespective of the physical location (folder/subfolder) of the document. For example I may have two different documents in the same subfolder, one may be classified as category "General" and subcategory "News", and the other may be classified as category "Technical" and subcategory "Whitepaper".
    Also we should be able to filter our document search based on subcategories. When we search a document based on a subcategory, then the search must fetch only those documents which have been marked as belonging to that subcategory while uploading the document. In the search page, the categories must appear as dropdowns and the dropdown values must contain the respective subcategories.
    As mentioned earlier, these categories and subcategories are independent of the KM directory structure.
    Please let us know how to go about this step by step.
    regards,
    SJ.

    Hi
    I think you can solve your problem with "Custom Properties"
    Using custom properties, u will not only get "Check box", but also "Dropdown"
    In your custom property, do the following
    Multivalued : Check the check box
    Allowed Values (csv) : Give your options
    Please check this <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/de31ec90-0201-0010-be95-f501d25027a8">article</a>
    It talks about dependent properties, through which you can have , category & subcategories
    Hope this will help you
    Regards
    Aparnna

  • Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked."  How can I unlock an app???

    Trying to discard an app into TRASH and I receive a message that "app cannot be removed because it is locked."  How can I unlock an app???

    Something may have corrupted your User account permissions. Whatever it was that did that is likely to do it again, and will require further investigation.
    To reset your User account permissions perform the following. It may not fix the problem but it will not make it any worse:
    Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac.
    When the Mac OS X Utilities screen appears, select Utilities > Terminal.
    In the Terminal window type resetpassword and press Enter. A window will open behind Terminal that looks like this:
    Do not enter a new password.
    Select your startup volume at the top. From the dropdown below it, select the user account with the problem.
    At the bottom of the window, you will see Reset Home Directory Permissions and ACLs.
    Click the Reset button.
    Quit Reset Password
    Quit Terminal
    Quit OS X Utilities and restart your Mac.
    Back up your system before doing anything else because disk corruption is another possibility that has to be considered.

  • How to convert a coloured document into black and white pdf .

    I have to write a script in c++ to convert a coloured document into black and white pdf .can anybody help.

    You've posted on a forum dedicated to discussions of a resource center called the "Adobe Exchange" that has nothing at all to do with Acrobat.

  • I am trying to link to page in my document from the table of contents.  How can this be done?

    I am trying to link to page in my document from the table of contents.  How can this be done?

    The Table of Contents picks up selected named Styles in the text like Head 1, 2 etc.
    Have you actually applied the styles?
    Peter

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • I am new to mac and am trying to understand how to do something i did in Word. In Word you can set up document so that you have 2 pages per 8.5 x 11 landscape page. Each page is treated as a separate page. Can this be done in word for mac 2008?

    I am new to mac and am trying to understand how to do something i did in Word. In Word you can set up document so that you have 2 pages per 8.5 x 11 landscape page. Each page is treated as a separate page. Can this be done in word for mac 2008?

    Suggest you ask on the Microsoft Mac forums since it's their software you have a question about:
    http://answers.microsoft.com/en-us/mac

  • TS3992 I tried to open a document on pages and it says: " document can't be opened"

    I tried to open a document on pages and it says: " document can't be opened" it happned in all of my devices and I' m connected to a wi fi internet

    I tried to open a document on pages and it says: " document can't be opened" it happned in all of my devices and I' m connected to a wi fi internet

  • I dragged a cut out image from one photoshop document into another and now it is blurry. What to do?

    I dragged a cut out image from one photoshop document into another and now it is blurry. What can I do to prevent this?

    What is the resolution of the image that you "dragged"? The resolution is the number in pixels per inch (ppi). If you dragged a significantly lower resolution file into a higher resolution file, it could result in a blurry image.
    see below:
    For further reading of Key Concepts:
    http://www.adobe.com/designcenter-archive/keyconcepts/articles/concept_resolution.html
    You can determine the image size by choosing Image > Image Size
    below you can see the pixel dimensions of my example image.
    Resolution Basics:
    Adobe TV- http://tv.adobe.com/watch/creative-sweet-tv/photoshop-resolution-basics/
    http://tv.adobe.com/watch/visual-design/getting-started-09-resizing-an-image/
    Adobe Help:
    http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7945a.h tml
    -janelle

  • I am trying to download a calendar into ical and keep getting this message-Some of the events in this calendar have alerts that open files or applications.  What am I doing wrong???

    I am trying to download a calendar into ical and keep getting this message-Some of the events in this calendar have alerts that open files or applications. Remove alerts or cancel 
    What am I doing wrong or missing??

    I have this same problem in October of 2013. I am unable to import .ics files into Lion that I exported from my Snow Leopard MacBookPro without losing all of my future events (which all have alerts attached). All of the events from BEFORE today's date are successfully importing, presumably because they are no longer expected to trigger alerts via Apple Mail. After my first unsuccessful attempt, I learned that iCal was communicating with iCloud by default. I have since turned off iCloud, but I have not found a solution to the problem. Harvey

  • How to group documents into folders

    How do you group documents into folders on iPad Adobe Reader

    You make a folder first, then you move files into the folder.
    Start with the Documents on the left. Click the Edit button (upper right). Click the Add Folder button (folder with + icon). Name the folder.
    Then Click the Edit button, if necessary. Click on the names of files (you'll see checkboxes). Then click the Add to Folder button (arrow into folder icon).

  • HT3529 How can I sort my iMessages into folders?

    How can I sort my iMessages into folders?
    I have always been able to sort my text messages in this way on other phones but cannot see any way of doing it on my iPhone. 
    I really need this facility as I use my phone for a number of different projects and need to be able to keep project message streams together in one place.
    Thanks

    C4U wrote:
    How can I sort my iMessages into folders?
    You don't, as this is not a feature of the iPhone messages app.

  • How to organize apps into folders and make them stick in iphone 3gs?

    Four hours down the drain! Darn, I decided to finally learn how to organize my apps into folders and do it right. Instead I spent four hours and must have got it wrong.
    I opened iTunes on my MacBook with my iPhone attached. Then clicked on the iPhone in the left side list of my iTunes. Then clicked on apps which brought up a nice page with all my iPhone apps listed in one window on the left and all the pages of the apps that are on my iPhone in the window on the right. So far this is what I think the User Manual and Help said to do.
    At that point I created new folders by dragging one app over another. For example, I would find a photography app and drag it onto another photography app. That automatically created a folder with the name photography. Just what I wanted. I then looked for more photography apps and dragged them to the folder.
    This is not too easy because I had eight pages of apps. At first, I would grab an app on a page and drag it to where I knew the corresponding folder would be and put it into the folder.
    Later I found another way was to use the list of my apps on the right to put them in apps.
    In the end, from what appeared on the screen, it seemed to me that most of my apps were in folders and the folders were either on page one, two, or three. At that point I thought that I should sync the MacBook with the iPhone, I believe, and did so.
    When the sync was finished I took the iPhone off the computer and looked at it. NONE of the folders I created, nor the organization into folders of the apps were on my iPhone!
    Obviously, I did something wrong since the same mess was on the iPhone as before, with apps all over the place and impossible to locate without taking too much time. This after four hours of work looking at a 13 in. laptop screen!
    What I hope is that someone smarter than me will look at what I did and tell me where I went wrong.
    I want the apps on the iPhone to be organized into logical folders so it is easier to find them. Something along the lines of a good database, you know?
    Thank you for reading to the end of this question,

    OK, I spent another afternoon doing the job started yesterday. Last night (could not sleep, so might as well think) I got to thinking that I really must have missed a step or something because all my work was done on the Mac and I did not recall any time when I transferred the new setup with folders to the iPhone.
    Sure enough, when I tried it today I did find that missing step. When looking at the Home Page of the iPhone or any page being worked on, in the lower right hand corner two buttons say
    SYNC APPLY
    I do not recall using the APPLY button on the first day trying this, but I used it this time.
    After making changes, I hit APPLY and the computer began to sync with the iPhone.
    This time, although there is nothing telling the user what is going on, the sync actually makes the iPhone pages to look exactly like the pages created on the Mac.
    Too bad the instructions and help did not say to do things in this way, which is the only correct way, as far as I can tell.
    I have about 155 apps on the iPhone, making the job extra lengthy. However, I never could do it on the iPhone’s tiny screen, even though it is possible, so this was good - working on the larger screen of the MacBook.
    There are also some (undocumented?) tricks in using the MacBook for this task. For example, it is possible to create a folder and then, using the list of all apps on the iPhone that is on the left side of screen, open the folder, click on the check box next to any app you want to put in the folder and it will jump right in!
    If the check box already has a check mark, just click the box to remove it, click again to put the check mark in the box and voila the app takes off for the folder. This also works to just put apps onto a certain page, if you want to do that, but dragging apps around sometimes works better.
    I hope it will not be necessary to do this again because of the time involved, and he need for quite a bit of thinking on how to move the apps and folders around to get everything just where you want it on the iPhone. The work reminded me of an old kids game that has a small square case with, I guess eleven movable numbers, that are all mixed up, and one space that is not filled with a number. You can move the little squares with the numbers around inside the case to try to line the numbers up in order from 1-11 and do it faster than anybody else.
    Well, unfortunately lining up all my apps was like that because each page of the iPhone only holds 16 folders or apps and each folder is limited to 12 apps. Starting with 155 apps it takes too much mouse maneuvering to make the process easy.
    Finally, the automatic folder names are very broad, as in MUSIC, LIFESTYLE, SPORTS and such, so I often just deleted the given categories and put my in my own. Also, some day I may break down the folders more because twelve apps in one folder means the apps are still pretty much out of view.
    I wrote this in case anyone else finds it and has the same irksome product. If I just reinvented the wheel, please do not tell me now.

Maybe you are looking for