I am updating content in an old site and am using an old extension to close a child page.  It has worked fine up until I started using CS6.  The code for this is in a template I am using and the code has not changed.

So the site is www.fulcrumcwi.com and the page URL is: FulcrumCWI Rebecca Morgan Operations Strategy Consulting Newsletters.
if you choose the first HTML link to the current newsletter when you try to use the close buttons neither of them work.  Yet if you go down to the issue from January, and go to the HTML version, it works just fine.  This is the code that the extension puts in:
<form>
          <input name="Close" onclick="self.close();return false" type="button" value="Close" />
        </form>
I haven't changed it in any way.  The only change is that I'm using Dreamweaver CS6 to make these changes.  Anyone have a fix for me?
As always, thanks in advance.  (and yes, I know this site needs major updating)
GraphicEdge

Boy, that didn't really come out very well.
On the archive_newsletters.html page, the "HTML" links are supposed to have target="_blank" in them...
<a href="newsletters_html/2014_03.html" target="_blank">HTML</a>
so a new tab is opened with the info. That new tab is then closed by the this.close() javascript.
On the newsletters that don't close correctly, there is no target="_blank" to open them in a new window initially, so they can't close with that method.

Similar Messages

  • My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?

    My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?

    Clean any debris from the adapter, docking station connector and the connector on the Nano.

  • Every time I sync my itouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod.  Delete the backup for this iPod, then try again." But I get the same message again.... Any ideas?

    Every time I sync my iTouch I get the following message - "iTunes could not back up the iPod because the backup was corrupt or not compatible with the iPod.  Delete the backup for this iPod, then try again."  However, when I follow these instructions, delete the backup and try again - I get the same message.  Any ideas what is wrong?

    Hi,
    Try this thread.    https://discussions.apple.com/message/12661408?messageID=12661408
    Carolyn  

  • My touch typing won't work on phone page, but it works on messages or eMail?  is there a reason for this?

    When I try and type somethink on my Phone page of the iPhone it seems to have hund, yet I am able to send SMSSes, eMails, etc.?  Is there a reason for this?

    What's the URL of the page?
    In the mean time clear the cache and reload the page.

  • Workflow fails when page is created through the CreatePublishingPageDialog.aspx. The settings for this list have been recently changed.

    Hi,
    I've created a content type and attached a workflow to it so when I create a publishing page the workflow should run.
    My Page creation is based on the "_layouts/15/CreatePublishingPageDialog.aspx" page in order to be allowed to fill in the required fields on item creation (so I don't have to go to the page afterwards and choose "edit properties").
    On my page library I have "Require content approval for submitted items" and "Require documents to be checked out before they can be edited?" set to YES.
    This design has worked fine before I added my workflow. However now when I click save or check in/publish I get the below error. My guess is that the workflow starts (and blocks) right after I fill in the filename and click next in the "CreatePublishingPageDialog.aspx"
    step to go to the required fields.
    If I go back to my page after I receive the error below I can edit the required properties again and then publish the page correctly.
    How do I avoid this? thank you
    My pages are created through
    Checking the ULS log I get this error:
    Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The settings for this list have been recently changed. Refresh
    your browser before editing this list.   
    at Microsoft.SharePoint.WebControls.BaseFieldControl.OnLoad(EventArgs e)   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Control.LoadRecursive()   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.HandleError(Exception e)   
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   
    at System.Web.UI.Page.ProcessRequest()   
    at System.Web.UI.Page.ProcessRequest(HttpContext context)   
    at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context)   
    at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi Jan,
    Thanks for posting this issue, Kindly try out with the hot fixes provided in the below mentioned URLS
    https://support.microsoft.com/kb/2536591?wa=wsignin1.0
    http://elblanco.codeplex.com/releases/view/6856
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • When trying to update  Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID /

    When trying to update  Apps in iTunes on my computer my old Apple ID appears, which is no longer in use and has no password; even when I try to create a password for this Old ID, Apple won't let me. When I go into see my Account settings My new Apple ID / iTunes ID are listed and the passwords are correct obviously so why can't I update my Apps?   Why does my Old apple ID keep appearing and how can I get Apple to change this?

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account.  Everything that I purchased under that id name will not play.  How can I fix this?

    My old itunes id was an email that no longer can be used, therefore, I can not change the password for that account.  Everything that I purchased under that id name will not play.  How can I fix this?

    I no longer have an email address that was also my Apple ID. Can I still use the email address as my Apple ID?
    Apple recommends you change your Apple ID to your current, working email address. This will not create another Apple ID, it will only change it to your working email address. See Changing the name you use for your Apple ID if you'd like more information.
    Note: @mac.com and @me.com Apple IDs can not be renamed.  If you no longer use the .mac or .me email address be sure to add your valid email address as an additional email address.
    From here  >  http://support.apple.com/kb/HT5622?viewlocale=en_US
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • TS1702 I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just give me a blank page.!!!! what is the solution for this.!!!!

    I use iphone5, I see an app update on the app store. but when App store and click on the update tab, it doesn't show me which application to update.. just gives me a blank page.!!!! I wouldn't able to know what app has to be updated, untill and unless i get check for each every app on the app store installed on my iphone... what is the solution for this.!!!! can any1 one help me out.!!!!

    Cc2528 wrote:
    The iTunes Store on my iPad is set up with all my music already. And at the very bottom it shows my apple Id username. The only place it shows the previous owners id is in the App Store...
    You can probably change the ID in the "iTunes and App stores" settings on the iPad....click on the wrong account ID , select sign out, then log in with your own ID, I have not done this but I think it works.....
    but I would be more inclined to to the factory reset and start afresh.

  • I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7.  Can't find "Software Update" option under General Setting.  Where might I look for the option to slightly upgrade the ISO for this device?

    I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7.  Can't find "Software Update" option under General Setting.  Where might I look for the option to slightly upgrade the ISO for this device?

    You likely have a 2G iPod and those can go higher than 4.2.1
    A 3G can go to 5.1.1
    IA 4G, with cameras can go to iOS 6.1.6.
    The 5G, also with cameras can go to iOS 8
    To update
    The Settings>General>Software Update comes with iOS 5 and later.
    Connect the iPod to your computer and update via iTunes as far as your iPod model allows
    iOS: How to update your iPhone, iPad, or iPod touch
    - A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
    - A 3G to 5.1.1  Requires iTunes version 10.5 or later
    - A 4G to 6.1.6  Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
    - A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
    Identifying iPod models                                                         

  • Tried to install Mountain Lion and it comes up with the following message  Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

    Tried to install Mountain Lion and it comes up with the following message  Mac OS X Update Combined can't be installed on this disk. This volume does not meet the requirements for this update. My laptop is using 10.7.3

    Go to  > Software Update and install updates. Finally, go to App Store, buy Mountain Lion and install. Open > http://www.apple.com/osx/specs/

  • I cannot update Firefox, my computer is claiming that I need admin permission (everything else updates fine) I am the admin for this computer and I have the password. Any ideas?

    I cannot update Firefox, I've tried disabling firewalls etc. My computer claims that I need admin permission to update Firefox although I am the owner and administrator of this computer. There are updates available and know the admin password for this computer. It started when I installed the Noscript tool (which I have tried disabling with the same results)
    == This happened ==
    A few times a week
    == I installed the Noscript tool

    1. Download either the zipped form (or the portable form) of the latest version of FireFox.
    2. Unzip (or execute the portable version) into a scratch directory. (If using the portable version, find the scratch subdirectory with the same contents as the firefox directory in the "program files" - probably called "firefox". You may have to look for it - it's buried)
    3. Erase the contents of the firefox subdirectory in the Program Files directory,
    4. and copy into "Program Files/firefox" directory the unzipped files (or the files in the portable subdirectory labelled "firefox" - the one that has the set of files and directories just like the ones you erased.).
    It worked for me.

  • Making this change would require code that is locked by a template or a translator. The change will be discarded.

    I apologize if this has been answered before, but I can't
    seem to find a solution in the forum archive. The error message
    below displays in Dreamweaver CS3 when I attempt to edit a
    Fireworks CS3 file using the "Edit" button in Dreamweaver. After
    clicking "Done" in Firworks to update the file and return to my
    HTML page in Dreamweaver, the error message displays. Can someone
    help me troubleshoot the problem? As a side note, I tested it in my
    older version of Dreamweaver and Fireworks (studio 8 versions) to
    see if I would get the same error message and I didn't - everything
    worked fine and no error message displayed.
    DW Error Message: Making this change would require code that
    is locked by a template or a translator. The change will be
    discarded.
    Thanks for your help,
    Donna

    > Murray, what do you mean? My pages validated before the
    switch to DW8.
    Are you sure? Show us one.
    The error you describe is only thrown in one of two cases -
    1. You have actually changed what is being mentioned (sadly
    this is most
    often NOT the case)
    2. You have a coding error somewhere on the page (or in the
    CSS) that is
    causing the template engine to burp this error message even
    though it
    doesn't really apply
    DW4 was nearly totally unaware of 'validation' errors. DW8 is
    MUCH stricter
    about them. When anyone says "this was fine in DW4 and is now
    not fine in
    DW8" this is the first and most likely solution.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Inge Grotjahn" <[email protected]> wrote in message
    news:[email protected]..
    > Am 13.09.2007 schrieb Murray *ACE*:
    >
    >> DW4 was much more tolerant of errors in your code
    than DW8 is. Your
    >> symptoms are an absolute diagnostic for such errors.
    >
    > Murray, what do you mean? My pages validated before the
    switch to DW8.
    > I only imported my site from DW4 and used the existing
    templates.
    > After changes of the template I used DW's feature to
    update all
    > relevant pages automatically. Then I wondered, why I
    couldn't make
    > changes on the child-pages within the editable regions.
    Finally I
    > created the template page new in DW8 and applied the new
    template to
    > all my pages. Now it is working fine, although my pages
    still state,
    > that they relate to a DW6 template, which I never had?
    >
    > Best regards:-)
    > Inge Grotjahn, puzzled:-)
    > --
    > CatManiacs World:
    http://www.gwsystems.com/inge

  • HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    jengrz wrote:
    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
    TechCrunch posted a solution today that applies to this problem, I think.
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Click your old iPhone and "unregister" it.
    More info here:
    http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

  • IOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

    iOS 7 doesn't work on iPod touch 4g, so does the mean its the end for this device? Or are they going to make updates specially for lower devices an apps that are compatible ??

    Which apps remain compatible will be up to the individual developers who sell those apps. There will be no further iOS updates, but those aren't really necessary to continue to use and enjoy your device. I still have an iPad 1 running on iOS 5, and it is fully functional.
    The App Store has an app called VintApps 3.1.1 that is specifically geared toward iOS 3.1, however, you would probably be able to run most of those apps on your iPod, and considering that there will be a rather large market for iOS 6 apps users, it is not likely that you will see a significant reduction in choices any time soon.
    It is not the end for the device in any sense except that it is at it's ultimate iOS level. And again, I have an iPad that is at it's ultimate iOS level (iOS 5), and I get new apps all the time that work for both my iPad and my iPhone that runs iOS 6.1.1
    No need to fret....
    Cheers,
    GB

  • Getting this:You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?

    I am getting this message: You cannot install Security Update 2011-002 on this volume. This volume does not meet the requirements for this update?
    is there a way to install this update?

    Hello
    More information would be useful, for example which Mac OS are you running.
    On the left menu item  About this Mac provides useful information.
    Also did you use Software Update to determine the update?
    Using Software Update can ensure you download and install the correct package for your particular Mac and OS version.

Maybe you are looking for

  • How to clear reference document with residue created with Automatic payment

    Dear All, Here is my scenario: This is related to vendor payment. F-47 Down Payment Request is created for amount Rs.1000. F110 Down Payment paid Rs.1000 An invoice document type "KR" created with amount Rs.1250 Using F-44, the downpayment and invoic

  • GETTING BLANK COLUMN IN ALV

    Hi friends, I want to get few columns blank in GRID display ALV.Pls suggest how can I get it.

  • Data type: variables of this type should hold maximum amount of data

    Dear all, In SAP we have any field like Richtext field in Lotunotes, which can hold anyamount of data, I mean it can store arbitary amount of data based on the input. I have came across certain fileds called LCHR, but it has got a limitation. Fields

  • Views not created in Oracle.

    The Migration process did not create views in the oracle schema. The access source database has 60 queries. There are no errors in the error log about view creation. As I understand, the migration process should convert the queries in access 2000 as

  • ICharts scaling and intervals MII 11.5

    I have an iChart (Line graph) that I have four pens, all of which have the auto scale is not checked.  I have the global range checked and I set the min and max.  The problem I have is the intervals from 100 (min) to 350 (max).  How can I set it so i