I am working in my itunes and removing duplicates. When I go to delete a series of items then I press the shift button highlight and delete; when I want to delete several that are not in a series I go to use my "fn" button, it wont work

I am working in my iTunes removing duplicates. When I want to remove a series of duplicates I hit the shift button on the key board, highlight and delete; when I want to select several to delete but are no in a series in the past I would hit the 'fn' button then highlight and delete. That button does not seem to be working at all. Any insight would be appreciated. Thx

Command-click does the trick.

Similar Messages

  • Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hi.. I got some problem  when i want to type something , letters are not displaying immediately , they are displaying after some seconds. can you help me out

    Hello:
    I am not being critical, but you seem to want Safari to behave exactly like Chrome.  Every software developer has a plan.  Sometimes features in one product parallel other products - sometime not.  There might be some things available that would help you.  Do not hold your breath, however, for suggestions from people who use these forums.  Most of us use (and like) Apple products.  If you wish to make suggestions for future improvements, there is a feedback area on this web site that Apple employees read/review.
    Candidly, your approach would be akin to suggesting that Apple emulate the "features" in Windows (heaven forbid).
    I use Safari (and have for years).  I use Firefox (not a bad product) as my alternate browser.
    Sorry for what appears to be a pedantic lecture.  However, I think most of us adapt to different products if we really want to use them.
    Barry
    Message was edited by: Barry Hemphill

  • I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    I have an iBook g4 14" 1.42 ghz. I recently installed a new hard drive.  I put the install CD in. Then, I pressed the power button, then the "C" key. Black screen and No chiming. Please tell me, what I can do to resolve this? What is the problem with it?

    Since it will not boot then a hardware test can't be run. You could try FireWire Target Disk Mode and if it works then access from another Mac to run tests on the new drive. You could also try installing the OS X software from the host computer. If this does not work then professional help should be considered.
    http://support.apple.com/kb/ht1661
    http://osxdaily.com/2010/04/07/how-to-boot-a-mac-in-target-disk-mode/
    http://www.macobserver.com/tmo/answers/how-to-use-target-disk-mode-to-boot-from- another-macs-hard-drive

  • I recently received an I Pod touch 4th generation. I synced it to my computer and now all my pictures that I have ever taken are now on my Ipod. How do I delete pictures that are not taken by the Ipod but were synced onto the ipod?

    I recently received an Ipod Touch 4th generation. I synced it to my computer and now all the pictures that I have ever taken are on my I pod. How do I delete pictures that have been synced from my computer?

    Hi megan21,
    Connect your iPod to iTunes, click on your device, and then click on the "Photos" page. If you don't want any photos on your iPod, make sure the "Sync photos from [photo application]" checkbox is unchecked. Or, you could select specific photos in that page to sync to your iPod.
    Hope this helps,
    O.C.

  • Best approach to delete records that are not in the source table anymore.

    I have a situation where I need to remove records from dimensions that are not in the source data anymore. Right now we are not maintaing history, i.e. not using SCD but planning for the next release. If we did that it would be easy to figure the latest records. The load is nightly and records are updated and new added.
    The approach that I am considering is to join the dimension tables the the sources on keys and delete what doesn't join. However, is there perhaps some function in OWB that would allow to do this automatically on import so it can be also in place for the future?
    Thanks!

    Bear in mind that deleting dimension records becomes problematic if you have facts attached to them. Just because this record is no longer in the active set doesn't mean that it wasn't used historically, and so have foreign key constraints on it in your database. IF this is the case, a short-term solution would be to add an expiry_date field to the dimension and update the load to set this value when the record disappears rather than to delete it.
    And to do that, use the target dimension as a source table, outer join it to the actual source table on the natural key, and so your update will set expiry_date=nvl(expiry_date,sysdate) to set to sysdate if this record has not already been expired on all records where the outer join fails.
    Further consideration: what do you do if the record is re-inserted into the source table? create a new dimension key? Or remove the expiry date?
    But I will say that I am not a fan of deleting records in most circumstances. What do you do if you discover a calculation error and need to fix that and republish historical cubes? Without the historical data, you lose the ability to do things like that.

  • How do I find out and delete VIs that are NOT CALLED? I want to clean up my project.

    Over the last few years, many VI's have accumulated that are no longer called from anywhere within my project. The project is a main GUI plus two other VIs launched by VI server plus many hundreds of VIs. I am not using source control. Any easy way to do this?

    Andrew_Scott_SPCi.ca wrote:
    Over the last few years, many VI's have accumulated that are no longer called from anywhere within my project. The project is a main GUI plus two other VIs launched by VI server plus many hundreds of VIs. I am not using source control. Any easy way to do this?
    First BACK UP!
    Yes create a Tree VI (a VI that contains the top-level VIs unsed in the app this includes the dynamcis).
    Then crate source Distribution (in the project it is where you create buold-specs) and configure the Source Distribtion to presevere the hiarchy.
    When you buld the Source Distribution it will pick-up every thing used by the tree and relink everythin in the new place with all of the dead code missing.
    You may have to repeat the process after testing since there is always another dynamic VI somewher that gets missed.
    After you are satified THEN delte to old stuff, DONE!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I go back to Firefox 3.6. I can only find the 4.0 upgrade and I need some of old add ons that are not available on 4.0 plus can't seem to post to Craiglist. I keeps crashing.

    When I look for 3.6.6 or only the 4.0 upgrade comes up. I thought I could downgrade.

    I had the same problem (issue with Google Apps and XUL runner etc) of needing to downgrade. To pull it off I went to the main Firefox download page (http://www.mozilla.com/en-US/firefox/new/) and followed the link to OTHER SYSTEMS AND LANGUAGES which took me to a page that included a link on the right hand side to download Firefox 3.6.16.
    (The stuff below pertains to Windows. If you are on a different OS your steps will vary)
    To do the actual downgrade (and there may be some other steps that would be wise to take but this is what worked for me) I merely renamed "c:\Program Files\Mozilla Firefox" to "c:\Program Files\Mozilla Firefox bad" (in case I want to try troubleshooting the issue later) and then ran the "Firefox Setup 3.6.16.exe" file that downloaded from that link. That solved my problem and I'm back and running 3.6.16.
    In case you don't feel comfortable changing things in your Program Files directory you might try a different approach and try uninstalling via the Control Panel and Add and Remove Programs (or whatever it is called on the version of Windows you are on) and then running the installation file. I didn't go that route so I can't tell you how well that might work.

  • I have inastalled Lion on my Mac Book Air and I have really problems. By application that are not from Apple the processors is 80 degrees celsius warm after 2-3 Minutes from the start of the Apps.How can I downgrade 2 Snow Leopard without 2 loose my Data?

    Can I use the Lion licence with my MacBook Pro if I downgraded my Air?

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • How do I delete pictures that are not on "camera Roll" that I transferd from my computer?

    I have tried everything..I have pictures on my phone that I transfered from my computer...they are old vaca pics and I want to delete them..They are not on the "camera roll"..I have tapped on edit, delete, ect everything and they won't delete..Please I hope someone can help me..
    Thanks

    Delete them on your computer then sync your iPhone.
    Or make sure when syncing your iPhone you remove them from the sync instructions.
    You cannot delete them directly from the IPhone.

  • Deleting photos that are not in the Camera Roll.

    I just got a new ipod touch and I put photos from my PC onto my ipod and now I want to delete these photos but they are not in my camera roll and there is no delete button available. Please help me delete them!

    You delete them the same way you put them there.  The sync process.
    Deselect them in itunes and sync.

  • Delete entries that are not in select option

    hi
      My select query is getting a values that were not in one of my select option. what is the statement to delete those entries from the internal table that were not in select option

    Hi,
    Please check the where conditon correctly.
    You may not be considering the all select option fileds in where condition.
    Check.
    or Use ..
    Delete from Itab where <field> not in <S_field>.
    Regards,
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • 2 weeks ago my Iphone just got stuck in the "desktop" then i pressed the 2 buttons to reboot it. since that event My Iphone is stucked on Apple logo, i already did a restore and unpdate software to 6.1.3 but it still not working. What can I do ?

    i tried to restore the iphone In a windows pc and on a Mac. when i restored my iphone on the Mac the iphone worked 2 times then it happen again the same problem...

    http://support.apple.com/kb/ts3694#error4000
    Error 4000, 4005, 4013, 4014, and 4016
    After you perform each step, try to restore your device.
    Restart your computer.
    Disconnect all your USB devices from your computer and connect to another USB port.
    Use a different USB cable.
    Uninstall third-party security software.
    Try restoring using an alternate computer.

  • Deleting applications that are not in the application folder

    I recently downloaded an app called Liteswitch. I didn't want it so I ctrl clicked on its icon in the System Preferences and removed the Liteswitch prefpane. But the app is still installed and working - how do I get rid of it?
    Thanks

    It's not only the Liteswitch app. It's more in general. I can't figure out if the apps are deleted when you ctrl click on their icon in the system prefs and remove it. The app still works after you have done this so it seems that it doesn't delete it. However after logging out the app doesn't work after logging back in, so maybe OSX waits to delete the app till you log out?

  • Help! how do I delete contacts that are not on my contact list? when I start a new message you can still get the number when you tap in the name?

    how do I delete contacts? help! contacts are deleted off my
    contacts. but when I go to messages and press in the name the contact
    still appears under other..... can I delete these?

    That is saved in cache memory on the phone and that memory is about 2MB in size and is eventually overwritten with use.  The only sure way to get rid of it is to restore as new and not from a backup and you will lose data.  I suggest you just ignore

  • TS1702 deleting apps that are not updated

    deleting apps. clash of clans, won't update properly and I want to delete it off app store

    the basci funcationality of the application is very similar toits website.
    That is the problem. Add additional functionality so the app does more than the web site. Otherwise what is the point of the app?

Maybe you are looking for