I bought a new iPhone 6 and switched carriers and am trying to get my voicemail and instant messages ported over to the new phone
I bought a new iPhone 6 and switched carriers and am trying to get my voicemail and instant messages ported over to the new phone
Restore from your backup. For voicemail contact your cell phone provider.
Similar Messages
-
I have two phones that share an itunes acct and a notice came up this morning and I hit yes. Now I get a text everytime I send a text to the other phone. How do I turn that off?
search google for "iphone remove picture from contact"
-
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
My wife and I both have the new iPhones. Is there a way to set up two separate iCloud accounts but have photo stream from both phones sync with one family mac? So, we don't want to share contacts or anything else, just photos... Thanks in advance
If you turned off Contacts wouldnt that mean that the Contacts would no longer be backed up to iCloud as well? That would make it a pain when upgrading a phone to not easily pull contacts back down.
-
I have problems syncing my new iPhone 5 to iTunes. I read somewhere to disable iPhotos and that has allowed me to sync but my photos are not on my iPhone. How can I fix this?
Try updating to iPhoto 9.4.1. If it's not appearing in your Software Update yet, try updating using a .dmg installer downloaded from the following page on the Apple website:
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums -
I got a new iphone- went to sync with itunes just to get music and it restored my phone to my old phone's settings. lost everything including ALL of my pictures. Is there any way to unsync my phone so I can get everything back?!!! please say yes!!!!
In short. No, you cannot unsync. If you had a back up from your old iPhone you cand restore from a back up.
In iTunes go to Edit > Preferences > Devices > and select the latest back up.
Before you synced your phone did you have it set up with the PhotoStream or iCloud? The pictures would be saved there. Or if you had them sync to a file on your computer. -
Hello, I own a license for Adobe CS5 Production Premium and Adobe CS4 Design Premium for Windows/PC. I am switching to an OSX/MAC system. Is it possible to transfer my licenses to the new platform?
It's possible to transfer licenses but it must be done by contacting a Customer Service representative by phone or web chat. They'll probably have you submit a form.
Contact Customer Care -
I have a Powerbook G4, an iPhone 4 and a new Macbook Pro. How do I get my iTunes library and apps from iPhone over to the new Macbook pro without losing anything?
http://support.apple.com/kb/HT4527?viewlocale=en_US&locale=en_US
-
I have a CC subscription and had it loaded on my Mac and my old MacBook pro. I bought a new macbook pro and turned off CC on my old laptop but when I try to load it on the new one it keeps saying I already have it activated on two devices. Help!
Contact support by web chat or phone to reset activations.
Mylenium -
I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..
It begins with: F-285-NER-151-QBQ-and continues with 5 more 3 or 4 letters/numbers..
Yes, that is the number. And what version of Aperture have you installed? The same version as on your old Mac?
But it don´t work on my new Mac...
In what way does it not work? Does it require you to enter a licence number for Aperture 2 as well? That will be necessary, if your serial number is an upgrade serial number. Then you will have to enter all previous numbers as well.
Or does Aperture not accept the number as correct? Then check the spelling; some letters are easily confused like "I" and "1" and "O" and "0". Do not use the number pad to enter the numbers.
See: Troubleshooting Professional Application Serial Numbers
Regards
Léonie -
I recently downloaded the latest iOS 7.1. A few days later I had an unrelated problem with my phone and Apple Store provided me with a new iPhone 5. However, when I tried to restore my backup from the Cloud, it said that iOS7 is required. what do I do?
Update your iphone to ios 7.
-
My brand new iPhone 4 is quitting apps unexpectedly, turning into a black screen and then restoring to home page. Restarting procedures didn't correct problem. Shall I follow full resetting instructions?
Thanks for the straightforwardness roaminggnome - I wasn't sure if this problem qualified as deseving a reset. Unfortunately, for some reason I can't explain, your response remained undisclosed to me for a while, the next reply after yours took preference and I ended up doing as Meg St.Clair's susgested and initiated download, installation and syncing of Smartsync which is now taking ages to finish... If problem persists shall do the resetting and restoring.
-
Equipment number and serial number to be carried over to the new item
Hi Friends,
I have an issue regarding the " Equipment number and serial number carried over to the new item " .
AS Per my Business Process i want to reject the old line item and add same Material in that order, while adding the new line item or substituted item , the new item has to pick the old serial number and Equipment number.
For the same We are using BAPI & BDC,
IN BAPI We do not have any function module and in BDC while rejecting the old line item serial number, BDC is not recording the same and default it is Picking Delete serial number as "NO".
Kindly through a light on this issue.
Helpful answer will be rewarded.
Advance thanks
Regards
Naren
Message was edited by:
Naren NarenHi
I think you can achieve my making the serial and equipment synchronization in the materiel master. Adjacent to where we specify the serial no profile we can make the setting. I am not in front of the system , kindly check
Also you need to have the internal number range for equipment which should be same as serial number
Regards
thyagarajan -
I have a new iPhone 5 version 8.1 - incoming caller ID does not work and I cannot send or receive SMS messages. ISP says everything is active on their side. I have just upgraded from Samsung with the same phone number and services. Help?
Hi cggturner,
I'm sorry to hear you are having issues with iOS 8.1. If you are still having issues with Caller ID and SMS Messaging, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Messages
Regards,
- Brendnen -
I have the iPhone 5 and I keep getting a no sim card message. I have had my phone for over a year now so I know I have a sim card. How can I fix this because it doesn't let me get calls now.
Try resetting the phone. Hold the home and power lock button until the Apple logo appears.If that does not work, turn the phone off and take the SIM out and then put it back in.
If that still does not work, you may have a defective SIM, in which case you will need a new one from your carrier.
Maybe you are looking for
-
i moved the form into application server , complies it there ,, now i want to access it from client machine through URL . when i write a URL in address bar in internet explorer window then press go button to call that module from application server .
-
Exporting WEBI to Excel - Dropping Header Section entirely
When I am saving a BIR2 WEBI report to Excel it drops the entire header section and just saves the detail. Does anyone have any ideas?
-
I am attempting to install ColdFusion on OpenSuSE 10.1, and I am greeted with quite a few errors when I attempt the install. Is there any specific package I need to install before running the installation, or is my problem related to something else?
-
Hi CRM Gurus, I have 2 questions. 1. In CRM config,(crmc_action_conf) , we have Time of Processing where we can tell when to process the action based on following options. 1. Immediate processing. 2. When Saving 3. Process using Selection Repor
-
How do I modify the image size on OXO template HP
the temporary site is "http://printtest2.businesscatalyst.com/" this is regarding what appears to be a "catalogue" presented on the homepage of the OXO template site. I want to modify the size of the images but can't find where the code is kept. When