I can edit my video clips, but I can't export the sequence.

OK.
I imported 30 GBs of my footage from my SD using my Macbook Pro's internal card reader for a video; while it was importing I noticed my computer was getting low on memory and the import was going to take all the memory (rookie mistake) and then some. So I canceled the import/transcoding (I optimized the footage), I proceeded to edit the footage and I was able to view and edit all the footage that was imported, even though before I canceled the import it only completed 30% of it. I finished editing and the share and export function is dimmed and when I try to import the footage again nothing happens. When I try to transcode the clips it says, "camera clips cannot be processed. you must import/reimport these first in order to process". My SD is still in my computer and I haven't taken it out since.
Is my computer mistaking the footage already being imported and its actually reading the footage from card?
Do I need to...
A) Take the memory card out and reimport it?
B) Do a XML export?
C) or do I have to restart everything and edit from scratch, which I hope isn't the case because this is for work and I need to turn this project around quick.
Any answers or places to look would be very much appreciated!!! You would be an answer to my prayers!!!

Select the clips that were not imported, and go to File->Import->Reimport from Camera or Card.
You don't have to do them all at once; and I strongly recommend you don't create optimized media at this stage. This is the bit that takes a long time, is probably not needed, and can be done later, anyway. (To optimize at any time, select clips in the browser, control-click and choose Transcode Media...)

Similar Messages

  • After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

    After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

    You should be getting an error message that PS CS5 requires a higher version of ACR with two options "render using Lightroom" or "open anyway". You should choose the first option. If you are not seeing the error message then go to your Lightroom prefrences >General Tab> under Prompts> select "Reset all warning dialogs", then try the edit in function again. 

  • Can you keep the audio of one video clip but add another clip?

    Can you keep the audio of one video clip but add another clip?
    I want to edit in other clips during an interview with a person, but have the interviewee's voice in the background?

    There are several way to do this;
    Replace with clip...
    http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d27a .html#WSA009AFF1-4D78-43cc-B60D-5B46E5ACB117

  • I added background music to the video clip, but I only hear noise, no video clip audio or the background music audio

    I added background music to the video clip in iMovie, the playback runs ok on the right corner preview screen, if I share it to movie clip or itunes or theather, I only hear noise, no video clip audio or the music audio
    If I don't put additional audio to the clip. audio effect or music background, the video plays normally
    I detached the audio from the video clip and deleted it, that way it was possible to listen to the music background and see the actual video clip, but no audio from the video clip.
    How can I have both?

    Hi
    My first thought is -
    Where are the original Audio file ?
    If it was on an Audio-CD then the CD is Ejected and one tries to play the movie - it can not find it = Silence.
    You are using an Non-Destructive Video editor - meaning that You have raw material - Video, Audio and photos but no Movie in Project - only a text document directing How You want it to be played. So if Audio is not where it was when this document were created - iMovie can not find it and e.g. audio goes silent.
    Yours thinking - Bengt W

  • I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

    I'm a new user and learning, I bought and installed Premiere Pro cs6.  I got a nice video clip but has a baby cried in the background and very annoying.  I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

    In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
    Neil

  • Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Hello, i was wondering if you can help me figure out how to edit a video to zoom in and out with the beat of the music?

    Use markers on every beat.
    The edit the zoom/scale to the markers.
    Adobe Premiere Pro Help | Working with markers

  • TA25521 After editing a video clip that was shot in 60fps how do I convert that clip to 24fps for publishing

    After editing a video clip in FCX that was shot in 60fps how do I convert that clip to 24fps for publishing?

    There is only a limited amount of Compressor instruction available unless you purchase a subscription to something like Lynda.com or a tutorial from Ripple or Larry Jordan.
    My advice to everyone who is interested in learning about Compressor is to read the first two chapters of the user manual – on basics and workflows. Those should provide enough of an understanding to cover the majority of things users need Compressor to accomplish. Of course there is plenty more for those who want to explore.
    Here is a short write-up from Ken Stone on changing frame rates.
    Good luck.
    Russ

  • I have switched of the Badges but I still can not export the images?

    I have switched of the Badges but I still can not export the images? because the badges are still showing on the  images.

    If you are seeing something overlayed on the exported image, this is probably not caused by the badges overlays, but by a watermark. 
    Check your export preset, if a watermark is enabled. In the "Export" panel set the "Export Preset" to "Edit" and check the settings for the preset you want to use. Disable any watermarks.

  • HT2486 how can I export the contact book data to a csv file for editing?

    how can I export the contact book data to a csv file for editing?

    You can edit a card right in Contacts. No need to export and re-import.
    Select a name and on the right side, click the Edit button:

  • Youtube videos loads but after 2-4 sec the player area gets blank with ivory white colour... Help

    Youtube videos loads but after 2-4 sec the player area gets blank with ivory white colour..
    == This happened ==
    Every time Firefox opened

    Why are you using such an old version of Firefox. The older versions have known security issues. Consider upgrading to the current version. (Help > Check for Updates)
    <u>'''''Adobe Flash'''''</u>
    You are using a <u>'''very old'''</u> version of Flash Player. Updating Flash Player may solve your problem
    <u>'''Install/Update Adobe Flash Player for Firefox'''</u>: your ver. 10.0 r10; current ver. 10.1 r53 ('''important security update 2010-06-10''')
    See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
    <u>'''''Other Issues'''''</u>: ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
    <u>'''Update Java'''</u>: your ver. 1.6.0.13; current ver. 1.6.0.20 (<u>important security update 04-15-2010</u>)
    (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
    ''(Windows users: Do the manual update; very easy.)''
    See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
    Do the update with Firefox closed.

  • I've been using iMovie for a while now to make movies out of mostly travel photos and video clips.  I try to vary the time for the photos from 1-4 sec.  Any ideas out there?

    I've been using iMovie for a while now to make movies out of mostly travel photos and video clips.  I try to vary the time for the photos from 1-4 sec., although most of them are 1-2 seconds so as to keep it short.  A friend of mine who saw my most recent product said that this is too short.  Any ideas out there?

    I apologize for my confusion on your question.  I find that depending on the principal of each photo and my target audience to determine the time frame for each photo.  It seems most people get impatient with viewing one photo for more than 1-2 seconds if the photo is not complex.
    If there are several things that interests the viewers in any one image, they want to look at it a second or two longer.  If the movie of images is a training aid, the images may need to be more than 3 seconds.  For intro's, or a trailer for a training movie, no longer than 1-2 seconds.
    That was a long answer to say, generally speaking, I find 3 seconds to be an average time length.

  • I downloaded the free trial of Lightroom 5 and love it but I can't export the images to a folder.  Is this because it is a free trial?

    I downloaded the free trial of Lightroom 5 and love it but I can't export the images to a folder.  Is this because it is a free trial?

    Yes, but I don't know enough about iPhoto to understand the consequences of "imported them into iPhoto first". In any event, I do understand the needs of Lightroom, and if the photos have been moved or renamed or deleted (or if the folders that contain them have been moved or renamed or deleted) outside of Lightroom, then this will cause the Lightroom symptoms you describe. You need to reconnect the photos in Lightroom using the instructions I linked to. Either that or move the photos and folders back to where they used to be after you imported them into Lightroom. Nothing else will work.
    In the future, please understand that your photos are never stored in Lightroom; they are stored on your hard disk somewhere and the very simple principle that you need to follow is that Lightroom needs to be informed of where the photos are at all times, using the methods in that link; or better yet by never moving or renaming or deleting the photos (and the folders that contain them) outside of Lightroom.
    As an additional recommendation, the idea of using both iPhoto and Lightroom on the same photos is one that could cause problems, especially for beginners. If you are going to use one of these software, then don't use the other one.

  • Can I export a sequence without rerendering the entire thing again?

    Using the latest FCP..
    Im working on a project with some heavy boris effects stuff... SLOW SLOW rendering.. The entire sequence is already rendered.. but when I go to export the sequence as a QT movies.. using the current settings.. it wants to rerender the **** thing.. 4+ hours.. instead of just spitting out a QT built with the ALREADY rendered sequences.. The timeline is 1080i XDCAM. The sequences is only 5 minutes long.. So it should export in a matter of minutes if it didnt want to RERENDER EVERYTHING..
    This is killing me right now..
    Can I export a sequence without rerendering the entire thing again?

    Joe
    Lets start at the bottom and work back ....
    What is your target format? You want to export the sequence but for what purpose? Is it for broadcast delivery, for burning to DVD, for web, or ....?
    You note that the timeline is 1080i XDCAM ... well that is a native Long GOP format. When you export it as a single self contained clip then all those GOP structures that make up the different elements of your sequenvce must be broken down and re-conformed into a singole semaless GOP structure that describes the whole. Thats why it is re-rendering.
    And GOP's are a hog to decode and encode ... thats why you're seeing such SLOW SLOW rendering.
    Suggestion number 1) Set your sequence's Render codec to ProRes 422 ... th erender files will be bigger but they rendering itself will be much faster.
    Suggestion number 2) If you are not exporting back to XDCAM media specifically then there is no real reason to export your edit as XDCAM HD. Try exporting as ProRes 422 (as per the render setting) ie choose Export > Quicktime Movie w/ Setting: Apple ProRes 422 (+not Current Settings+)
    Suggestion number 3) If you are working on a big and powerful mac like the latest and greatest MacPro's, then in future just set your sequence codec to ProRes 422 and edit the XDCAM files directly in that ProRes 422 timeline, when done then Export > Quicktime Movie w/ Current Settings
    Hope thats helpful
    Andy

  • When I import my files only the audio plays back not the video. If I export the sequence its there?

    When I import my files only the audio plays back not the video. If I export the sequence its there?
    I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
    Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
    As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
    Any help would be appreciated and if theres any more info I can provide please let me know.
    Thanks
    Drew

    Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
    Also, More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • I can not play the sequence in preview mode. How do I fix this issue?

    Each frame loads in the preview window when highlighted, but I can not play the sequence.

    I am working on a project for school. I have been draging clips down to the timeline and matching it with a few voice overs. Nothing too complex. I have been previewing my work as I go by pressing the space bar, Im not sure what I did but now Premiere will not play the preview in the Program sequence window.

Maybe you are looking for

  • Check Boxes in ALV (parent-child relation)

    Hi Friends... I am trying to display some data in ALV using the parent child relationship. I require the first field of the parent record to be a check box which is input enabled. Whatever i tried the check box is not comming as the first field, inst

  • FB50 posting to internal order not possible.

    I have another problem. We wanted to settle costs collected on internal orders to a balance sheet account. So I created a new order type, allocation structure, settle profile. But when I try to do fb50 and debit some expenses on this internal order I

  • Connect iPad to tv

    What extra cables, wires, etc do I need to connect my iPad 2 to my TV? I want to watch netflix videos thru my iPad. Thanks

  • Apple TV switching primary library to new mac from PC

    i just bought a new Mac and have an extensive itunes library. i have migrated the files over to the mac, and now want to make it the primary computer on the wireless network for my apple tv (the pc is running out os space and is old). how do i switch

  • HT4847 How do I access my complete call iPhone 5 history in iCloud?

    I need to access my call history data.  I sync regularly, but do not know how to access all the old calls.  Can anyone advise me please?