I can't hear the outgoing and incoming calls but I can hear the ringer and I was able to call using viber in my iphone 4s 16gb.
I can't hear the outgoing and incoming calls but I can hear the ringer and I was able to call using viber in my iphone 4s 16gb.
Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen
Similar Messages
-
I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions
Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/ -
I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?
Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.
-
when i take a partial screen shot i do not know where it goes, when i take a partial screen shot i do not know where it goes because it dose not go to my desk top and i cant find it in the search thing... but i can hear it being taken
an oh! one more thing, you can change the default folder or create a new one to store all screenshots. Also you can change the file format. Look at the following links
http://hints.macworld.com/article.php?story=20050824073301844
http://guides.macrumors.com/Taking_Screenshots_in_Mac_OS_X -
NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.
Hello Sandylynn,
After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
People can't hear you during a phone
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!
Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I can hear the caller, but they can't hear me?? This is my second iphone and it's happened on both?
Does anyone have any suggestions??? I can hear the caller, but they can't hear me!
Here's the problem I faced. I have a iPhone 4 with AT&T. I have the latest iOS 5.0.1. When on a voice call the other party was unable to hear my voice. The other party couldn't hear me even if I used the white ear buds that came with the phone or even on speaker phone. All other features of the phone worked. I could even Facetime, record voice memos and use Voice Control. So I knew it wasn't a hardware problem. AT&T installed a new SIM card. Apple had me reset everthing and even do a restore. I even went to an Apple store and an Apple Genius couldn't figure out why only phone calls didn't work. He ran a diagnostics on the phone and everything checked out. His only option was to offer to sell me a replacement phone for $149, since mine was out of warranty. So today I continued my search for an answer and came to this page (https://discussions.apple.com/message/16912532#16912532) and noticed the little green checkmark under the "More like This" section for "Re: iOS 5 Bluetooth Bug". So I thought to myself, if theres a connection on this page, maybe it is my problem. It was worth a shot at least. So I turned Bluetooth off on my phone and now the other party can again hear my voice again on phone calls. All this and I resolved my own problem and didn't have to spend $149. CRAZY!
-
i just downloaded face time and I can hear the othe person just fine but they cannot hear me. But when I play music they can hear music. what is the problem and gow do i fix it?
Test your microphone in the Sound preference pane.
-
My iphone 4 can make and receive calls but I cannot hear the person on the other end...they can hear me. I have tried plugging headphones in and resetting...any other ideas?
If you need to use the phone now, try using speaker phone until you can take it to an Apple store and have them further look into the problem.
-
I have an iMac model 4,1 running OSX 10.6.8. The CD/DVD drive went bad and I have replaced it. However I can not get disks to eject. I have asked about this before and tried all all the suggestions I have received but I can not eject.
Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem. I still can not eject. When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
How do I solve this problem?Hi again Hal
Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
You have also tried resetting the PRAM as I suggestion in your other thread...?
See resetting the PRAM > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys. -
I can hear caller but he can't hear me except on hands free and speaker phone
I can hear caller but he can't hear me except on hands free and speaker phone, hoew to fix this problem
Hi Shirley,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
I can't hear an incoming call, but they can hear me
I can make a call, and it connects but I can't hear the person I'm calling. They can hear me. I figured out that I can hear only if I set the call on Speaker.
I have been told that the microphone is broken so will have to go to Apple to get it fixed! Explains the problem!
-
When making a phone I can hear the other caller but they can't hear me
No one can hear me when i make I phone call but I can hear them ??? I've tried the voice memo and that seems to work fine !!! Has Any one got any ideas that could help me please ???
you need to isolate wetyher or not its a hardware issue.
make a voice memo. (if there is sound then, your bottom mic is fine.)
Make a video (if there is sound then your speaker mic is fine.)
if those dont work restore to factory settings and setu p as new, if the issue persists, setup replacement
if you have sound, try resetting your network settings. (settings general>reset>reset network setting THIS WILL DELETE ANY SAVED WIFI PASSWORDS.) -
when making a phone call on my iphone,I can hear the person that I am calling but they can not hear my voice
My first new iphone4 was received and installed complete.
Nothing to hear when i was calling, only when I used loudspeaker.
complete reset and reprogrammed Iphone, same result.
Called Apple support and received a new Iphone4 next day.
Updated and programmed.
It works.
2 weeks ago My son's iphone4, same problem, could only call with loudspeaker??
Anyone an Idea. -
My buttons and screen work, but I can't activate the screen to see what I'm doing. This is after water damage. Any idea what is wrong? I'm not sure what to fix..
I know the screen works because when it first turned on I saw the apple logo and then the screen. If I hold the home and power button, I see the apple logo when it resets. Then it goes blank again.
I can hear when I get a call and pick up, and I can stop the sound and/or decline the call with the power button and side buttons. It also still vibrates. I'm confused - if the screen works, the buttons work, it vibrates, makes sound, and the touchscreen feature also works... what is wrong for me to fix? Why can't I see anything?!
I appreciate any help anybody has to offer!!!I apologize for the confusion. This was literally the only option on Apple's "Contact Us" section that I was able to access. I assumed that Apple's clear intent to have me go here instead of speaking with someone in live time, and the fact this is on the Apple website, meant I could get some advice... Both over the phone and online they require information I need to see my screen to provide so those are not options. I tried to bypass this when calling through Skype. Some lady who didn't know what was going on, who I waited a good while to speak with, put me on hold; I gave up after 30minutes of waiting to speak to somebody again.
I've stumbled upon a few tricks to help me get through this problem, but I'm at a loss. I need this phone to work until late December. I need more tricks. So yes, it's worth understanding. Knowing what is going on will let me Google it and work with it, if nobody here is willing to help...
And yes, it IS a glitchy phone. It has been a glitchy phone for a long time. Long before this. But completely unrelated issues. I was assuming this wasn't just a glitch but something maybe somebody could help me understand.
Maybe you are looking for
-
I am trying to use an case staemnet in oracle create table test1 (Status varchar2(10); declare Status varchar2(02); begin Status := '1' insert into test1 values (case Status when '1' then 'CREATE' when '2' then 'UPDATE' when '3' then 'DELETE else 'IN
-
I'm afraid this might be obscure ... But I am trying to get an old Gateway FPD1500 monitor with an MDR20 out to work with my new Macbook Pro, and have bought an adapter for that purpose. It doesn't work--although it tries (it blue-screens for a few s
-
Hi, Is there any method in APO of smoothing out a supply plan similar to the range of coverage profile in R/3. What we would like is that: APO looks out say 100 days in the future. Adds all demand. Divides by 100 to get an average daily demand. Creat
-
Process flow on running in owb11g is erroring out
On running the PF in owb11g I am getting the below error: [PLS-00201: identifier 'OWBSYS.WB_WORKSPACE_MANAGMENT' must be declared] I checked some thread and found that the users need to be registered as target schema but this option is not there in o
-
What are the steps/Commands to Create a new RMAN Repository?