I can't import my iMovie 9.09 Movies (Files) into the new iMovie. How can I make the 9.0.9. Files importable/openable in the new iMovie?

Well, you can try this: right click the file, go down to encode file, and reencode it for the Mac.
Hugh

Similar Messages

IPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17)

iPhoto won't import movies (.mov, .mp4) into the library since last upgrade to 9.5.1 (902.17). Error message is "File format not recognized". Before that, no problem. Had them first on SD-card over USB, tried then to copy to the HD (Desktop) and import from there, but didn't work. Imported successfully into iMovie and exported as .mp4, but even this is not recognized.

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Post back with the result.

Please help me how can i make my app store because when i open it it says cannot connect to iTunes please if you have any helpful solution inform me

Please help me how can i make my app store because when i open it it says cannot connect to iTunes please if you have any helpful solution inform me

Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset
Message was edited by: Diavonex

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger?

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?

McHagihara wrote:
Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
You can try to locate your problem without the erase and install method by running through this list of fixes.
Step by Step to fix your Mac
But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
Most commonly used backup methods
Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
How to erase and install Snow Leopard 10.6
If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
Yuo might need to install more RAM into the machine to make 10.6 run better as well.

I have imported my FAVORITES from IE, but don't know how to bookmark a page and move it into the FAVORITES specific folder. in English

After having imported my FAVORITES from IE, how do I bookmark a page and move it into a specific folder?
Since I also use IE, will my FAVORITES still be there?

see analytical information:
[https://support.mozilla.org/en-US/kb/how-do-i-use-bookmarks
How do I use bookmarks?]
"Since I also use IE,...... there?" yes it is(if you do not delete it).
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

When in yahoo mail I can't move mail into the drop down folders below HTheeninyaabout the 9th folder I the drop down menu.

When in yahoo mail I can't move my read mail into the drop down folders below about the 9th folder in the drop down menu. What am I doing wrong?

To all, embarrassingly enough, I have discovered that I didn't know how to expand the three categories including 'Bookmarks Menu' in the 'Bookmark This Page' pop up interface. It was expanded by default on the initial Firefox opening and first page bookmark attempt. Next use it only showed categories. I clicked and double clicked the 'Bookmarks Menu' line, but failed to see the small, shaded triangle used to expand/collapse list. If it appears collapsed, just tap triangle at left of line to see all folders. It seems to open the same way after I do it for first time. Sorry for the inconvenience, and thanks for all the attempts to help.

Can I make my cursor stay with a newly opened folder selection?

When I open a folder in my documents, the cursor jumps to the top of the page instead of staying with that selection. I have lots of folders with lots of entries in each. I then spend a lot of time scrolling down to find where I left off. How can I make the cursor stay with newly opened folder in stead of automatically jumping back to the very top of the documents?

Hi Barney. My finder view is list.                         ...up to here. I know have to scroll back down to Folder B to
    Sample:                                                           to click on sub a. When I do, It jumps back up here. I scroll Folder A                                                             down to Folder B, sub a, and then find my pdf. I have many
Sub folder a                                                       more more Folders to search, and each time, the curser
   doc                                                                   jumps up here instead of letting the screen show the               xls                                                                   selected folder's contents.
   doc
   jpg
Subfolder b
   xls
   pfd
>Folder B             I open B, and the curser jumps...
Sub folder a
pdf
   doc
etc

I got an iPhone today. The computer that had my iPod music on it is broken. So I am using a new computer. I have both my iPod and iPhone plugged into this computer. How do I make it so my iPod music stays on my iTunes so I can update my iPhone? HELP!

My computer broke and so I am using a new one to update the music on my iPhone I got today. I can't get my music from my iPod touch (that's plugged in at the same time) to stay on this iTunes. I have already authorized it and everything. I just need to be able to unplug my iPod and plug in my iPhone to get my stinkin music on there. Please help! I'm begging!

The ipod is not a backup device. The music sync is one way - computer to ipod. The only exception is itunes purchases: Without syncing:File>transfer Purchases
Copy everything from your backup copy of your old computer to your new one.

How can I make links in another application (say thunderbird) open with a specific Firefox profile

Having several different Firefox profiles, clicking a link in another application (for instance,a link in Thunderbird,or in a email message,generally speaking) brings up the profile manager:is there a way to bypass it and force all links to open with a specific Firefox version\profile?

A way to do that is to edit the registry and add the -p "profile" switch to those protocol links. There is however no guarantee that such a change stays after an update and Firefox may complain.<br />
Another way is not to use the profile manager, but select the profile for the default browser once in the PM to set the profile for the default browser, so that profile is marked as Default=1 in profiles.ini. Then place a checkmark in the box to never ask and use a desktop shortcut to start each Firefox version with its own profile, so you do not have to use the PM as that would set another profile with Default=1
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

How do I import an existing finalised imovie into a new project either in part or full. The movie I want to import is filed under "movies" but greyed out when I go through the procedure in imovie 11

How do I import an existing finalised movie clip into a new developing project ? I go through the imovie 11 procedure for importing and the list of clips (finalised and un-finalised) appears, but always "greyed out" which makes it impossible to create anything. I have tried placing it on the desk top and dragging but this doesn't work either.

AppleMan Thanks very much for the information, however I could't make it work. I followed your instructions to the letter, in fact I tried every which-way. I created a dedicated file into which I copied and pasted the project from "package contents" but it was still greyed out when I went to retrieve it. I also found that the file size was reduced to only a few Kb. Any further step-by-step instructions would be appreciated as I am obviously doing something wrong. Babowa It appears that in imovie everything has to be "finalised" before it can be used or shared elsewhere in the same way as a disk has to be to be played elsewhere. Funnily enough an MOV file I converted to Mp4 was not greyed out and I was able to import it.... an exercise I am not keen on because of resolution loss during conversion

Imported .mov file does not play in Flash export

I have imported a .mov file as a background for a flash banner I want to put on my website. The exported flash file plays all of the text animations, but the .mov background does not work -- it's just frozen on the first frame. I have read similar problems with QT exports, but I haven't found any similar flash problems. Thanks for any help.

I think it might be necessary to look at the Inspector in QuickTime. Open the .mov file in QuickTime and go to Window > Show Movie Inspector:
In the info window that comes up, under the Format: field you want to look at the second row where it tells you the audio track format:
In this example, this particular clip is in a really odd format. It is MPEG Layer 2 (no Layer 3 which is MP3 format) at 32Khz, Mono. Preferably for anything in iMovie or iDVD you would prefer the Inspector to look like this:
Linear PCM, 16bit (etc) 2 channels, 48kHz. This can be accomplished by downloading and installing MPEG Streamclip. Open the program and drag the .mov clip into the applicationw window (with five dots in it). Then under the File Menu choose Export to QuickTime:
Then go to the Compression pull-down menu and choose Apple Intermediat Codec (AIC):
Then under the Audio section, leave the audio pulldown to uncompressed but do set the sample rate to 48kHz instead of Auto:

Help! How do I open an imovie6 "My Great Movie" file in imovie '09?

I copied the "My Great Movie" file from an OS10.4 mac (which has the imovie6) over to an OS10.6 Snow Leopard mac which has the imovie '09. It seemed to have created an entire My Great Movie folder now. There is now no longer just a single My Great Movie file to open. What do I do? Shouldn't the imovie6 file be recognized by imovie '09?
thanks for any insight!

Looks like doing everything in the older version makes more sense (but not from a logistical stand-point c'mon APPLE!). Anyway, is there a way to "replace" photos that are currently in a timeline (in iMovie 06)? I looks like I only have the option to delete a current photo in the timeline and the replace it with the new one that I want to put in. There must be some sort of "replace" function somewhere...??? I want to keep all the same transitions, sound track, everything...just replace some photos. The easiest and most efficient way would be to simply "replace" some photos while retaining all the attributes already set. Is this possible?? If so, can you tell me how?

Can i make a slideshow in iPhoto to play in a dvd player with out going to iDVD

I need to have a slide show to play in the funeral parlor dvd player,
Can I do that right out of iPhoto? with out haveing to learn iDVD or iMovie
I have experimented exporting into iTunes, then putting it into iDVD but it seems like redundancy. There is a depth to iDVD that i really don't need/want if I don't have to go there.
The slideshow is the way I like it in iPHOTO, music, ect.
Before I get in over my head with applicatons I am unfamiliar with i thought I would ask the community.
OH, an if so, HOW DO I DO IT!!!
OH also, time is of the essence, today is Friday, Wednesday is the funeral
thanx

follow up:
then there is this one
You can put up to 2 hours of playing time on an iDVD video DVD. Create the slideshow in iPhoto with an aspect ratio of 4:3 (iDVD) and export it at Size = Medium or Large. This will create a Quicktime movie file.
Open iDVD, create a project and select a theme. Drag the exported Quicktime movie file into the iDVD window being careful to avoid any drop zones. (???)
Follow this workflowin iDVD to help ensure the best quality final product:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

I have several short movies on iMovie (OSX 10.7.5) and want to move them to Microsoft PP. How?

I have several short movies on iMovie and want to move them into PP slots. How can I capture them?

You can do that too, it's all in the iDVD program.
But first you want to assemble the separate clips into one big long clip. For that you would use iMovie. Share to the Media Browser (choose the Large size). Let it export then quit iMovie.
Open iDVD, click on the Media button and then the Movies button. Under the iMovie star icon you will see your final assembled clips movie. In the iDVD project window turn on the map view (it's little boxes that look like a flowchart) then drag the iMovie project into the first box:
You can set the project to startup without a Menu, and then loop continuously as well. Go up to the Advanced Menu then click on the Loop movie option to turn it on.
Once checked the Loop movie status will appear as curved arrow icon in the Project Window:
In the lower right corner is the icon indicating this video clip will loop while being played.

Trouble importing .mov files into FCP X

I'm relatively new to FCP so this could be a really easy fix. I took a bunch of short video clips (20s --> 1.5 min) on my Panasonic ZS25 and imported the clips to my MacBook Pro (2008 with 2GB 1067 MHz DDR3 Memory and 2.26 GHz Intel Core 2 Duo Processor). [I have version 10.8.4 of OSX]. The clips from my camera were in .mts format so I used the Smart Convertor Pro App from the App Store to convert all 80 files to a .mov format. Both the converted clips and FCP X are stored on my 700 GB external, and while I tried to import the clips into FCP X, the program almost immediately froze and shut down. Thinking I "overloaded" (for lack of a better word) FCP X, I decided to try and delete the blank clips that were showing up in the program. However each time I attempted to click on a clip the program crashed again. I eventually was able to delete all the clips, and decided to move the converted clips from my external to my desktop. Once they were moved I then tried to import just one clip from the desktop to FCP X (which is still run through my external). Although it was successfully imported, once I clicked on the file to play it in FCP X the program crashed again.
What can possibly be the problem and what can I do to fix it?
Note: This is my first time using both my new camera (and having to deal with this .mts BS) as well as FCP X.

Thanks Russ, Tom, and Hughmass for all your input. It really is appreciated. Unfortunatly even after moving FCPX to my desktop and converting the .mov files in MPEGstreamclip, importing the movie clips into the program still causes random shut downs. Perhaps the clips are corrupted or something? I honestly don't know, and I'd rather kind of just ignore this problem then keep hashing away seeing as the clips aren't that important (and yes, being super smart, i deleted them off the camera well before hand).
Just to make sure FCPX works, I took some short clips on my Panasonic DMCZS25, and imported them successfully into FCPX and was able to edit together a quick piece. Thanks again for all your help!

Importing MOV files - no preview

Hi,
i am having problems with mov files imported to my project. I can't see any preview just a green field representing the movie ( or checkboard). What is the problem.

It would be nice if you could tell us something more about the .mov file. Open the file in Quick Time, click Window > Show Movie info and post what's written there.

I can't import my iMovie 9.09 Movies (Files) into the new iMovie. How can I make the 9.0.9. Files importable/openable in the new iMovie?

Similar Messages

Maybe you are looking for