I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive it nothing happens.
I can't lock screen on Ipad mini. My lock screen button is working for shutdowning Ipad, but don't working for lock screen. Also I tried to lock screen from Assistive Touch and it's not working. When I click lock screen on assistive touch it nothing happens.
Thank you for that update.
I would next backup your device to iTunes with this article:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
And restore it first as a new device, and verify that it works properly, then restore from your backup with the same article below to ensure that it is still working.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
If it does not work correctly when you set up the phone as a new device, I would next seek service for your iPad:
http://www.apple.com/support/ipad/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling
Similar Messages
-
I was gifted an iPhone5 from U.S and it does not work in dubai as it is locked how do i unlock it ??
i was gifted an iphone 5 from U.S and it does not work in dubai as it is locked how do i unlock it ??
Only the carrier it's locked to can unlock it. Have whoever you got it from contact the carrier it's locked to and request an unlock.
-
I got the iphone 5 from Australia and I put in a Sim card from GREEK company and it is not WORKing WHAT can I DO
I did ALL REQUIRED STEPS with the Australian Sim cards but when I put GREEK Sim cards in ,mobile closes
-
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
I TRY TO OPEN IPHOTO AND I COULD NOT. WHEN I CLICK ON THE ICON DID NOT EVEN BOUNCE. THEN I DRAGED IT ON MY DESKTOP AND NOW I CAN'T EVEN FIND THE ICON ANYWHERE, what can i do???
iOS? or OSX
OSX = Finder > Applications > iPhoto. Double click the app to open it.
The icon (alias) will then be back on the dock. Right click the Icon > Keep in Dock.
Icons dragged off the dock vanish in a puff of smoke.. they are only aliases (shortcuts)
If you mean iOS I can't really understand what is happening.. -
When I click on the "Get mail" icon, nothing happens even though I know there is mail. However, if I click on "send" and then go back to the Inbox, the emails start loading. What's going on?
Make sure your Mac's software is up to date.
Click your Apple menu top right in your screen.
From the drop down menu click Software Update. -
When I get an email with a pic in and I go to reply a box drops Dow and asks "save photo" when I click on that it "seems" like nothing happens, bot are they being automatically saved someplace, where?
If photos are saved they go to the Camera Roll in the Photos App.
-
When i click on the Itunes desktop icon nothing happens?
When i click on the Itunes desktop icon nothing happens? I've uninstalled itunes with Revo Uinstaller and deleted all traces and then reinstalled it through the Apple Software Updater and i still cant get Itunes to come up when i click on it.
I've read that i can go to the task manager and end the process but im afraid to it says "Warning" when i click to end the process.
Anybody help?
Message was edited by: jckinnick+Yeah itunes.exe is the process im wondering about ending, wouldn't it be ended if i'v turned my computer of since then?+
Something must be auto-starting itunes, then. For instance MSN messenger, it can have a plug-in to show what's playing in itunes and that could be starting itunes. There are other programs that can do it too - I don't know what's on your PC.
Since this is happening in more than one account, I think you are going to have to go through the pain of using MSCONFIG to troubleshoot this issue.
http://support.apple.com/kb/HT1275 -
i am not able access my ipad as it says that the icloud has not been backed up. it also does not accept when i click ok.
Try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
When it's rebooted you can force a backup via Settings > iCloud -
When I click on firefox setup 11.o nothing happens
when i click on firefox setup 11.0 nothing happens
You may have a corrupted file. Right-click it, select Delete.
Then, go to [http://www.getfirefox.com www.getfirefox.com], download a fresh copy. When Internet Explorer asks you what you want to do with the File, tell it to save to your Desktop.
Once it is finished downloading, double-click it. Allow any administrator prompts, so that Firefox can continue.
Does that help you any?
A few other things you can do (these are good steps to ensure your PC's health anyway):
Run all Windows Updates. Install any Service Packs, Hardware updates, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections. -
When i click on app store in itunes nothing happens
when i click on app store in itunes nothing happens
I got the same thing as well, is there any way of fixing this... seems like a few of us are experiencing this....
-
IPod Touch and iTunes Will Not Work Together.
I just received a new iPod Touch 32GB yesterday and have had nothing but troubles trying to get it to play nicely with iTunes. The Touch is currently version 1.1.5/4B1 (I believe updated to this sometime yesterday).
I am running iTunes v. 7.7.1 (11). When I connect the Touch to my iMac with iTunes running (even though I have it checked, just plugging the Touch in does not open iTunes) nothing happens for a long time and then I get a spinning beach ball which I have let go on for more than 20 minutes at one time.
The Touch and iTunes work fine independently. The last two times after force quitting iTunes, I have received the following error: iTunes could not connect to the iPhone (??) "" because an unknown error occurred (OxE8000035).
Does anyone know what this error is, & how do I resolve these issues?
<Edited by Moderator>At least atm -
I have re-installed iTunes after restarting the iMac and then restarted again, the Touch connected and showed right away after that and I am happily, currently syncing.
If it goes bottoms up again, I'll be back! -
IPod Touch and Wi-Fi not working?
So I've got my house's Wi-Fi siganl found, connected to it, got the correct password for it, says everything is fine in my settings. Yet when I try to connect to anything involving the internet on my iPod it says I have no internet access? I just got it today for xmas and it was v2.1 I've downloaded v2.2 and still the same problem.
Please helped I've worked for hours trying to fix it and looked through all kinds of topics etc!Hello and Welcome to Apple Discussions.
Please check:
That the router is serving you a good IP address (Settings > WiFi > {your SSID} > i.e. 192.168.x.x. or 10.x.x.x)
That MAC address filtering is off or that you have added the iPod's MAC address to the router.
That you are using WPA or WPA2 encryption if possible. If you must use WEP use a password of the correct length (5 ASCII chars (10 hex) for 40bit, 13 ASCII chars (26 hex) for 128bit WEP)
Restart/reboot the router.
Let us know how you get on.
mrtotes -
Bridge Cache Destination Cannot be Changed from Old User and Find does not Work
Often administrators find themselves in a position of making a new admin account to resolve a lost system drive or some compatibility problem.
If Bridge has a cache destination linked to this old account, it is due to the older admin account being deleted before the new admin account is setup in Bridge with the cache destination properly linked to the new user cache in the library locations for bridge caches. This problem causes some headaches with things like keywords and find.
If you have had to restore your system or generate a "new user" account, it would be important to go into Bridge and ensure that your cache preference in pointing at the right location, before deleting the "old user". If the "old user" is deleted, you might find the cache location locked to this "old user" in a file structure that no longer exists. This makes if fixed and unchangeable.
If you encounter this problem, regenerate the old user name as an administrator account. Go into that account and start Bridge. Check the location of the cache file in the preferences. You will see that it is located in the proper place for this new account. It is also the same location as your current account which no doubt you have found is frozen into place.
At this point, while in the "old user" admin account:
Go get info on your "old user"/Library/Caches/Adobe/Bridge CS3/Cache
Note the folder nest and go to each folder and apply permissions to each of these folders that allow your "new user" read and write access. You can do this in one step by applying the permissions to the Library folder and all enclosed folders, but who knows what that might do. Focus on solving the problem.
Then:
Switch back to your "new user" (that is your current user) account, open Bridge, go to the preference for cache and you will note, magically, it is now located in the right account, it has been unfrozen from the "old user", once deleted, and now brought back to life to help you get ride of this problem.
For good measure, press the choose button, you will find you go to the finder to the right location in your "new user"/current user account.
You will also find that FIND works after this and also Bridge is zippy and fast as it should be.
You can now quit Bridge, Log Out of your "new user" account, log back in and find that all is just the way it should be. Once this is done, go into your system preferences for users and delete the "old user" account (into the trash, do not save a thread).
It seems that there are many situations where reviving and old user id will help with repairs to permissions problems in a mac that has been through system drive failure or significant application conflicts that require making a new user.
Hope this helps someone.Often administrators find themselves in a position of making a new admin account to resolve a lost system drive or some compatibility problem.
If Bridge has a cache destination linked to this old account, it is due to the older admin account being deleted before the new admin account is setup in Bridge with the cache destination properly linked to the new user cache in the library locations for bridge caches. This problem causes some headaches with things like keywords and find.
If you have had to restore your system or generate a "new user" account, it would be important to go into Bridge and ensure that your cache preference in pointing at the right location, before deleting the "old user". If the "old user" is deleted, you might find the cache location locked to this "old user" in a file structure that no longer exists. This makes if fixed and unchangeable.
If you encounter this problem, regenerate the old user name as an administrator account. Go into that account and start Bridge. Check the location of the cache file in the preferences. You will see that it is located in the proper place for this new account. It is also the same location as your current account which no doubt you have found is frozen into place.
At this point, while in the "old user" admin account:
Go get info on your "old user"/Library/Caches/Adobe/Bridge CS3/Cache
Note the folder nest and go to each folder and apply permissions to each of these folders that allow your "new user" read and write access. You can do this in one step by applying the permissions to the Library folder and all enclosed folders, but who knows what that might do. Focus on solving the problem.
Then:
Switch back to your "new user" (that is your current user) account, open Bridge, go to the preference for cache and you will note, magically, it is now located in the right account, it has been unfrozen from the "old user", once deleted, and now brought back to life to help you get ride of this problem.
For good measure, press the choose button, you will find you go to the finder to the right location in your "new user"/current user account.
You will also find that FIND works after this and also Bridge is zippy and fast as it should be.
You can now quit Bridge, Log Out of your "new user" account, log back in and find that all is just the way it should be. Once this is done, go into your system preferences for users and delete the "old user" account (into the trash, do not save a thread).
It seems that there are many situations where reviving and old user id will help with repairs to permissions problems in a mac that has been through system drive failure or significant application conflicts that require making a new user.
Hope this helps someone. -
Running Win7Pro64. Tried to update to 3.6.4 and it failed. It said to download the whole program so I did. Tried to install and says that the "License File" is missing. SO I go to un-install 3.6.3 myslef with Control Panel. All that did was remove Firefox as a listed program in control panel, all of it is still there in Explorer and it runs fine. So I go to use Helper.Exe under the Uninstall folder of Mozilla Firefox and when I click that, it says "Not a Valid Win-32 Application" What's up with that?? All I want to do is remove 3.6.3 so that I can clean install 3.6.4. I tried installing 3.6.4 two different ways with failures both times. I tried to remove 3.6.3 using two different ways, and that also failed both times.
== This happened ==
Just once or twice
== I tried updating to 3.6.4. It failed both with the update and the full download, so tried to un-install 3.6.3 in control panel, then helper.exe with no luck.You don't want to update to 3.6.4, trust me. Stay with 3.6.3. If you need to download it again you can find it here:
http://releases.mozilla.org/pub/mozilla.org/firefox/releases/3.6.3/win32/en-US/
Maybe you are looking for
-
How do you get a line with MULTIPLE fields to WRAP ?
How do you get a line with MULTIPLE fields to WRAP ? Good afternoon everyone... THE PROBLEM: Why doesn’t a line with multiple fields WRAP? HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE If I have 2 fields on a line (this is now a hypothetical example and
-
Angry with Creative Tech Support!!! Battery fried and they won't help!
I am seething with anger right now over the awful Tech support I just received from Creative's Tech support phone line. I called to find out how I can get my almost new less than 2yrs old Creative Zen Sleek Photo 20gb MP3 players battery replaced. I
-
iMac 10.5.8 is slow. Verified Disk Permissions and then repaired. No big improvement in speed. What about internet files (safari and firefox) ; caches and cookies? Thank you.
-
Hello all, I have been using my Digital@nywhere card for a few years now, with no problems. However, as I upgraded my OS to Windows 7, after reinstalling the drivers and the software, the software does not run. Whenever I click on the TVR button, I g
-
Hey Folks! One Question: Does VoiceOver work with any 3,5mm Mics? For example I saw a Philips Headset (SHE9775) that has a remote with inbuilt Mic. The thing that is making me sceptic is that they don't mention the funcionality (for instance - VoiceO