I can't print the inform to complete the printer registration

Hello.
I have an HP C310 with the web service activated and it shows the mail address for eprint but when i click on the "print inform" button appears a message saying eprint instruction page has sended and that it may take a few moments to print it. The problem is thas i did it yesterday and the page is not printed yet.
Any suggestions?
Thank you very much.

1.Deactivate Web Services.
2.Restore network factory settings.
3.Turn OFF wait 30 seconds and Turn ON the printer
4.Run wireless network setup wizard.
5.Activate Web Services.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Displaying the current users information instead of the value of the person who completed the form in the first place.

I found this fantatic post regarding querying the user profile service
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx?pi47623=2#comments
However i have an issue whenever the form is opened again either to view or edit, it displays the current users information
instead of the value of the person who completed the form in the first place.
Please help me, I'm turning more grey each minute

I think it is how the current user information is stored based on your logic.
You might be quering current value again when loading the form (Form load Rule).
you have to tweak your logic, after the user submits the form you can set the username to the one who saved it.
or in form load, write a logic to see if the form was not saved before and then query the username( by using internal field like "formstatue")
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

Just upgraded...why can't I see the information section on the left hand side anymore in iphoto '11? I used it all the time.

I've just upgraded from iphoto '08 to iphoto '11 and I'm really missing the information pane on the bottom left hand side (under where events, album, libraries etc are). I used to use this all the time when importing photos to sort them into Events and now I can't seem to get it back. Does it not exist in the new iphoto? Thanks, Hellen

That info section is a drawer on the right hand side of the iPhoto window. Click on the Info button at the lower right corner:
Click to view full size
OT

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Hello there .. When I want to change my security question I can't and show me Emil not for me to send the information for change the security question how to fix this problem

Alternatives for Help Resetting Security Questions and/or Rescue Mail
     1. If you have a rescue email address or a Security Questions issue, then see:
         If you forgot the answers to your Apple ID security questions - Apple Support.
         Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
     2. Fill out and submit this form. Select the topic, Account Security. You must
         have a Rescue Email to use this option.
     3. This is the only option if you do not already have a valid Rescue Email.
         These are telephone numbers for contacting Apple Support in your country.
         Apple ID- Contacting Apple for help with Apple ID account security. Select
         the appropriate country and call. Ask to speak to the Account Security Team.
     4. Account security issues almost always require you to speak directly to an
         Apple representative to securely establish your identity as the account holder.
         You can set it up so that Apple calls you, either immediately or at a time
         convenient to you.
            1. Go to www.apple.com/support.
            2. Choose Contact Support and click Contact Us.
            3. Choose Other Apple ID Topics and choose the appropriate topic for
                your issue.
            4. Follow the onscreen instructions.
         Note: If you have already forgotten your security questions, then you cannot
         set up a rescue email address in order to reset them. You must set up
         the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
                        Apple ID- All about Apple ID security questions.

I've received an email of an unauthorised access which states it was done in Canada, is there any way I can request Apple to inform me what the IP address that made unauthorised access was?

I've received an email of an unauthorised access which states it was done in Canada, is there any way I can request Apple to inform me what the IP address that made unauthorised access was?
I want to know as it possibly relates to other security issues I've had of late and it would help further my investigation. Would a subject access request possibly allow me to recieve this information? As far as I know there's no way to see a list of when and where I sign in using my Apple ID?

Sorry but no, Apple cannot give you that information. The only way they could give anyone such an IP address would be if they received a court order to do so, if even then; I don't know what sort of tracking and logs they do.
However, if this email claimed that someone had tried to reset your password and in any way gave you a link to click to confirm your account information, the email was almost certainly a phish. Such phishing messages have been quite common over the last two or three weeks and should be deleted without responding. You may wish to manually type in the URL for Apple's page for managing an Apple ID and change your password, just as a precaution, and make sure you've set good security questions using responses that can't just be looked up for you (they don't have to be real information; you can use any response you wish as long as you can remember what you entered).
Regards.

I've just redeemed a $25 gift card but when the process was completed, the previous credit I had on my account (about $3) had disappeared and the total credit I now have is only $25. How can I retreive the $3? Thanks for your help.

I've just redeemed a $25 gift card but when the process was completed, the previous credit I had on my account (about $3) had disappeared and the total credit I now have is only $25. How can I retreive the $3? Thanks for your help.

Contact Support and explain your issue.
Mac App Store Support -
http://www.apple.com/support/mac/app-store/

Filliable PDF to Excel- tell me Is there a way to export just the information typed in the fields?

I created a filliable form with over 100 sections. I purchased Adobe's ExportPDF to extract the information to and Excel sheet. However every time I upload a completed PDF it only converts the format and doesn’t capture any of the fields’ typed information. I thought that was why I named each field something when creating the form.
Is there a way to export just the information typed in the fields?

Hi,
ExportPDF is just a convertion tool, it is not meant for extracting information out of the form.
You may want to consider Adobe Acrobat. You can extract information from form fields via Tools> Forms > More Form Options > ExportData. If you'd like to try it out, we offer a 30-day trial of Acrobat X Professional for Windows here: http://www.adobe.com/go/tryacrobatpro/
~Pranav

Premiere Pro is not reading all of the video content in my AVCHD clip. I know this because my computer plays all of the content through Preview, so the information is on the card. How do I get Premiere to read all of the content?

Premiere Pro is not reading all of the video content in my AVCHD clip. I know this because my computer plays all of the content through Preview, so the information is on the card. How do I get Premiere to read all of the content?

First, AVCHD isn't just "one" clip, it splits the video & audio into several files each per clip, typically with randomly generated names. The only way they "play" correctly is if the software doing so is able to read from the data file ...in a different folder ... the information that X clip is actually A, B, D, #@, and 456 video clips and TR, #r54, and ert$%4 audio clips. The next "clip" is ... and on and on. So both rapid access to the video files AND that database file are necessary to play the files back, or do anything else with them.
VLC is a fairly decent but simple playback tool. It's nowhere near as complicated nor demanding in its "relationship" with those clips as an NLE like PrPro, which will be trying to do more reading & writing.
Further, many of the preferences in PrPro are natively set so that it writes project, cache, preview, & database files next to the footage. So ... if it doesn't have both a fast enough connection with the data AND space for putting all of it's own stuff there, it tells you it can't work the file.
Therefore ... the need to have the complete data from the card in the exact same folder structure it was in ON the card copied to a "local" hard drive.
Neil

"the finder cannot complete the operation because some data in [name of iMovie file] could not be read or written (Error Code 26)

Hi all,
I have an iMovie project in iMovie HD 6.0.3. (Mac OS 10.5.8)
It plays, but I cannot copy the file (including saving it to a flash drive). I get either a message
"the finder cannot complete the operation because some data in [name of
iMovie file] could not be read or written (Error Code 26)" or the
message "A project file is missing. The file [name of the QuickTime
movie inside the project.dv] couldn't be opened and is being skipped."
This happened suddenly, I was able to save a backup version numerous
times while working on the project.
I followed some of Karl Petersen's advise on apple discussions. I opened
the package contents, and everything seems to be there. The source file
(original QuickTime movie) is there and can be opened and played. I
replaced the current project file with the backup in the package
contents, but that did not change anything. I was able to export the
movie timeline into a new project as a single clip, but would like to be
able to copy the current project.
Thanks for any ideas..

Make sure all drives are formatted as "Mac OS Extended". (Journalling preferred, but not necessary).

"Reader could not contact the server to complete the request" error

While trying to tranfer a document into pdf format I have suddenly received the above error - "Reader could not contact the server to complete the request" I have already transfered three or four documents today, but now am suddenly receiving this error. I have tried rebooting my server to check for issues on my end but it is fine. Any suggestions? Thanks.

Hi there,
Here are some suggestions you can try:
a) Ensure your internet connection is available and try again.
b) If you are using an older version of Reader, try installing the latest (Reader XI) and try again.
c) Log into the web app (createpdf.acrobat.com) and click on Convert to PDF on the right hand pane and try converting to PDF from there.
Laura.

TS3694 trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do?

trying to restore from iTunes back onto iPhone 5 - it starts but then error msg comes up saying there is not enough space on the iPhone to complete the restore - what do I do? - Help cos I've lost my contacts!!!!!

If you're not a developer then you really should not have upgraded.
I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

The Finder cannot complete the operation? Backup stops midway

Very often in OSX when I'm copying a disk or large number of files (backing up) I get this message:
"The Finder cannot complete the operation because (x) could not be read or written. (Error code -36)"
When I hit OK, the backup stops at that point.
I'll delete the offending file and sometimes that works, but many times the same thing will happen with a different file again.
Why is this happening and what can I do to stop it?

a great response. I've been having the same problem . Using copy for Backup because it seemed easier than learning a backup program, and hard disks are so big, now. The bigger question is what to do about broken files. In my case, I think the problem was interaction between OS 10.4.11 and Itunes 6.0.1 which I hadn't upgraded to 6.0.5, and that's all my hardware can do. I've rolled back to 10.4.10, and reinstalled Ipod software and Itunes 6.0.5 -not sure if the problem is solved. Wanted to backup 1st before a major test.
But adding podcasts to Ipod leads to hang up, force quit, hang up, turn off power. *So what to do about files that stop copy* (especially when they seem to be hidden, (aside from using Carbon Copy Cloner)
i.e. spotlight can't find them (i.e. 0F54AE5Dd01),
or old versions don't seem to help (Abstract.dplmageCache).
are they a problem? I've deleted some, but this abstract file seems to freeze shutdown when it's not there. and I can't delete what I can't find.

I updated my mac which is an O X LION .7 but after the update has completed the mac rebooted itself and never stop booting

i updated my mac which is an O X LION .7 but after the update has completed the mac rebooted itself and never stop booting

flamebliss wrote:
yes wen i try booting in Safe Mode it behave the same. i have downloaded the combo update of 10.7.5 from another laptop, so how do i run it on my mac. THANKS for helping
The goal is to mount the combo update .dmg on the desktop and then open and run it. If you can't get to the desktop to begin with, that won't work. Another approach is to treat the Mac's hard disk as just another HD by using a second Mac and then connecting the problematic one via Target Disk Mode. See http://support.apple.com/kb/ht1661. Note that both Macs will need Firewire ports and you'll need a FIrewire cable to connect them. With the combo updater, one of the steps in the process is to select the drive you want to install the update on. Once you're successfully connected in Target Disk Mode, the problematic drive should appear in the list.
If that doesn't work or Target Disk Mode isn't possible, the only other solution is to boot into Recovery Mode; see http://support.apple.com/kb/ht4718. Note that once booted into recovery mode, you have access to Disk Utility, and you should try running Repair Disk after selecting the bad drive to see if something's wrong with the directory which could be fixed. When you select that drive, you should also look at S.M.A.R.T. Status at the bottom of the window. It should say "Verified." If it says Failing or Failed, the HD needs to be replaced.
If the HD is OK, all that's left that I can think of is to reinstall Lion using Recovery Mode. I hope you've maintained current backups or at least complete Time Machine backups. Of course, if you have a backup and the backup is bootable, you could boot from that, wipe the internal HD clean, and clone the backup onto the internal HD.

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!

thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working

Cannot move any files into trash to delete them. I get a Trash warning box saying "The Finder cannot complete the operation because some data in 'file name' could not be read or written.(Error code - 36)".Macbook has so much data it is almost not working.
I have tried reseting to factory settings by removing battery and holding down the power switch for more than 5 sec but this does nothing.
Any ideas would be greatly appreciated as I think with so much unwanted data on the desktop and other places the whole os will crash very soon.
Thanks, Rick

The hard drive may be dying anyway, or the directory damaged because it is so full. You should never let the hard drive get over 85% full.
A -36 error is a read/write error.
All you did with the power is reset the SMC. Does nothing to reset everything to factory settings.
Do you have your original 10.4 installer discs for the MacBook?
Is your data backed up?

I can't print the inform to complete the printer registrati​on

Similar Messages

Maybe you are looking for

I can't print the inform to complete the printer registration