I can't seem to get calendar events created on my iphone to syc to the icloud calendar
I am using an iPhone 4 and all of a sudden, I can't get my calendar events on my phone to up sync to the icloud. Contacts work great from phone to cloud..but events don't work at all.
Help!
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.
Similar Messages
-
I just synced my iPhone on iCloud and it deleted all of my calendar events and isn't even showing up on the iCloud website. Is there a way to get all of those events back?
I've had the same problem, synced yesterday and I've lost all my events in my calendar. Restored my phone,not worked, deleted icloud that hasnot worked,nothing is coming up at all on icloud calendar, and my mac was backed up when I plugged in today so not backed up on that. Someone please help, can I get them back? my life was on that calendar.
-
How do I talk to someone about my account and merging two subscriptions together...Can't seem to get to any way to conversing with a human from the website.
Worst Service In the World
I just want to cancel my order and get a refund, the company MUST be corrupt because it is nearly Impossible to get what is rightfully mine. It's been 3 years.. how, sad, is that, I got other people to try too...
they steal from people... by making it impossible to talk to anyone real. -
i can't seem to get my iPad to synch with my new iMac. The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes. Any other ideas for how to overcome this block?
What do you mean by 'registered it on iTunes' ? You've authorised your account on your Mac's iTunes via the Store > Authorise This Computer menu option ? And you've copied your library onto the Mac ?
Copying content between computers : http://support.apple.com/kb/HT4527
You may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
Using iCloud, my iCloud calenda is syncing with my iPhone but not with the Outlook calendar on my PC (Windows 7)
smurfanda wrote:
I agree. What I see is that it is creating an icloud calendar in Outlook but I want it to sync to Outook itself.
That is what it does. There is no sync, you have a new calendar. -
Can't Seem to Get my Event Based Job To Execute
What makes this slightly different than other posts on this topic is that we want to use our own queue/payload object rather than the built-in SCHEDULER$_EVENT_QUEUE. There are many reasons for this. What follows in under 11gR2 (11.2.0.3)
So, the following code blocks are just for a proof of concept piece intended to create a simple job and to have it fired based on the arrival of a message in a queue. (Something we have a requirement to do) The issue that I just can't seem to resolve is that, for some reason, the scheduler object never triggers the job. I can't find any trace or alert log entries to help me diagnose. What I do know is that the queue itself is fine (dequeues and enqueues work normally). The object payload type is fine (All of these tested from the EVENT_JOB_MGR package provided below).
Here's the PL/SQL Type that is the payload object of the queue and is also referenced in the package:
CREATE OR REPLACE TYPE RUN_MSG AS OBJECT
STATUS VARCHAR2(255)
Here are the queue and queue table:
BEGIN
DBMS_AQADM.CREATE_QUEUE_TABLE
QUEUE_TABLE => 'JUPSHAW.EVENT_JOB_QT'
,QUEUE_PAYLOAD_TYPE => 'JUPSHAW.RUN_MSG'
,COMPATIBLE => '10.0.0'
,STORAGE_CLAUSE => '
TABLESPACE RISKDM_DATA'
,SORT_LIST => 'ENQ_TIME'
,MULTIPLE_CONSUMERS => TRUE
,MESSAGE_GROUPING => 0
,SECURE => FALSE
End;
BEGIN
DBMS_AQADM.CREATE_QUEUE
QUEUE_NAME => 'JUPSHAW.EVENT_JOB_Q'
,QUEUE_TABLE => 'JUPSHAW.EVENT_JOB_QT'
,QUEUE_TYPE => SYS.DBMS_AQADM.NORMAL_QUEUE
,MAX_RETRIES => 0
,RETRY_DELAY => 0
,RETENTION_TIME => -1
END;
DECLARE
aSubscriber sys.aq$_agent;
BEGIN
aSubscriber := sys.aq$_agent('SCHEDULER$_EVENT_AGENT',
0);
dbms_aqadm.add_subscriber
( queue_name => 'EVENT_JOB_Q'
,subscriber => aSubscriber);
END;
BEGIN
SYS.DBMS_AQADM.START_QUEUE
QUEUE_NAME => 'JUPSHAW.EVENT_JOB_Q'
,ENQUEUE => TRUE
,DEQUEUE => TRUE
END;
(I think the scheduler automatically added itself as a subscriber (see above) after the queue itself was created)
So, here's the simple package:
CREATE OR REPLACE PACKAGE EVENT_JOB_MGR
AS
PROCEDURE DEQUEUE_JOB_STATUS_MSG;
PROCEDURE ENQUEUE_JOB_STATUS_MSG;
PROCEDURE RECORD_DEQUEUED_STATUS( a_RunMsg RUN_MSG );
END EVENT_JOB_MGR;
CREATE OR REPLACE PACKAGE BODY EVENT_JOB_MGR
AS
PROCEDURE RECORD_DEQUEUED_STATUS( a_RunMsg RUN_MSG )
IS
ls_Status VARCHAR2(32);
BEGIN
ls_Status := a_RunMsg.STATUS;
INSERT INTO DEQUEUE_RECORD
( STATUS )
VALUES
( ls_Status );
COMMIT;
END;
PROCEDURE DEQUEUE_JOB_STATUS_MSG
IS
l_DeQOptions DBMS_AQ.DEQUEUE_OPTIONS_T;
l_MsgProps DBMS_AQ.MESSAGE_PROPERTIES_T;
l_DeQMsgID RAW(16);
l_RunMsg RUN_MSG;
BEGIN
l_DeQOptions.CONSUMER_NAME := 'EVENT_JOB';
DBMS_AQ.DEQUEUE( queue_name => 'EVENT_JOB_Q',
dequeue_options => l_DeQOptions,
message_properties => l_MsgProps,
payload => l_RunMsg,
msgid => l_DeQMsgID );
COMMIT;
RECORD_DEQUEUED_STATUS( l_RunMsg );
END;
PROCEDURE ENQUEUE_JOB_STATUS_MSG
IS
l_EnQOptions DBMS_AQ.ENQUEUE_OPTIONS_T;
l_MsgProps DBMS_AQ.MESSAGE_PROPERTIES_T;
l_EnQMsgID RAW(16);
l_RunMsg RUN_MSG;
BEGIN
l_RunMsg := RUN_MSG('Success');
DBMS_AQ.ENQUEUE( QUEUE_NAME => 'EVENT_JOB_Q',
ENQUEUE_OPTIONS => l_EnQOptions,
MESSAGE_PROPERTIES => l_MsgProps,
PAYLOAD => l_RunMsg,
MSGID => l_EnQMsgID);
END;
END EVENT_JOB_MGR;
-- Finally the program, schedule and job
BEGIN
DBMS_SCHEDULER.CREATE_PROGRAM(
PROGRAM_NAME => 'EVENT_JOB_PROG',
PROGRAM_ACTION => 'EVENT_JOB_MGR.RECORD_DEQUEUED_STATUS',
PROGRAM_TYPE => 'STORED_PROCEDURE',
NUMBER_OF_ARGUMENTS => 1,
ENABLED => FALSE );
DBMS_SCHEDULER.DEFINE_METADATA_ARGUMENT (
program_name => 'EVENT_JOB_PROG',
argument_position => 1,
metadata_attribute => 'EVENT_MESSAGE' );
DBMS_SCHEDULER.ENABLE( NAME => 'EVENT_JOB_PROG');
EXCEPTION
WHEN OTHERS THEN RAISE ;
END;
COMMIT
BEGIN
DBMS_SCHEDULER.CREATE_EVENT_SCHEDULE (
schedule_name => 'EVENT_JOB_SCHED',
start_date => SYSTIMESTAMP,
event_condition => 'TAB.USER_DATA.STATUS = ''SUCCESS''',
queue_spec => 'EVENT_JOB_Q');
END;
BEGIN
DBMS_SCHEDULER.CREATE_JOB (
job_name => 'EVENT_JOB',
program_name => 'EVENT_JOB_PROG',
schedule_name => 'EVENT_JOB_SCHED',
enabled => TRUE,
comments => 'Start if you get a success message');
END;
I call the ENQUEUE_JOB_STATUS_MSG method to stick a message on the queue. I can confirm that it can be dequeued and logged using the DEQUEUE_JOB_STATUS_MSG method in the package. However, nothing seems to happen (at all) as far as the scheduler job when a message is put on the queue. I am thinking it should dequeue the message with status set to SUCCESS and then, kick off the job.
Can anyone see why the above wouldn't work? Been stuck here for a couple of days.
Thanks,
-JoeTry to create job that react on event directly not using schedule.
BEGIN
dbms_scheduler.create_job(job_name => 'EVENT_JOB',
program_name => 'EVENT_JOB_PROG',
event_condition => 'TAB.USER_DATA.STATUS = ''SUCCESS''',
queue_spec => 'EVENT_JOB_Q',
enabled => true,
auto_drop => FALSE);
END;
Check if your schedule EVENT_JOB_SCHED is enabled -
Hello, it says it will take 65 hours to download a movie that was already purchased on the Cloud, How do I speed up the process. It says to go to Setting in I- tunes Store and select a lower video resolution but I don't see the Settings symbol in I tunes store. How do I select a lower setting and is that the best way if I bought the movie on HD?
No programs can load websites
* https://support.mozilla.com/en-US/kb/No%20programs%20can%20load%20websites
Check and tell if its working. -
Video Download Helper is an add-on that I frequently use. It used to have an icon right next to the home icon beside the URL line. It is no longer there. It disappeared after Firefox prompted me to update.
I believe that the add-on is still available to use by Firefox because it has a drop-down embedded in the "tools" drop-down in Firefox.
I have attempted to reload Video Download Helper, but to no avail.
Thanks for your help!Try this:
http://www.downloadhelper.net/manual.php
You may need to manually add the icon to your toolbar. -
Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?
Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.
-
I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my iMac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events, so that if adding an event on my iPone it never appears on my other hardware? Can anyone help me sort this out?
Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this? I fear this is a really stupid question!
My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails. But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments. To further complicate things I have other email accounts that I use for business/professional and community work. If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level? or both?
Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there a way to name my personal account as one to sync to iCloud? -
I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?
Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
boot method: static
IP address: the address you chose in 7)
mask: 255.255.255.0
gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
click +
in the add menu click IP
enter your IP (from step 7)
make sure the Protocol is IPP
Name the printer and set its location
Go to Use field, in the pull down menu select "Select Software"
Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
Click +
Select your printer
Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done. -
I can't seem to get Firefox to update on my Linux Mint system???
First I have to say I'm a little tech challenged. I can't seem to get my Firefox to update to the latest version. I've tried the Help page and done the fixes to no avail. I also downloaded the latest version but my computer will not seem to do anything with it. My Linux Mint is currently up to date.
My Firefox does crash occasionally and I wind up having to shut the computer down manually. Linux restarts fine but sometimes it takes two or three tries to get Firefox up without crashing again...
ThanksFirst check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings. -
I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
I've tried redoing this file several times. It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
Any suggestions?If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK. -
I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.
This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?
-
I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!
Maybe you are looking for
-
Quick questions about Macbook Pro specs...
I am looking at the different Macbooks that Apple offers in order to decide which one to purchase. The two main differences that i noticed are as follows. Can someone please help me answer these two questions? 1. What is the difference between a Hard
-
CD drive not communicating with computer
I get this as a message when my CD drive spits out disc without burning it: "The disc can't be burned because an unexpected error occurred (error code 0x8002006E)". The CD drive makes a loud noise and does not complete the burning of disc. It used t
-
Mac OS X Leopard - Contribute Upgrade
Does anyone know of an upgrade for Contribute on Mac OS X Leopard? thanks
-
How to find Jolt client error message
We are using Java Servlet/Jolt to talk with our Tux services. We got two kinds of error messages like following: Error message:TPESVCERR - server error while handling request Error number:10 Error number: and Error message:TPETIME - timeout occured E
-
Hi All, By default the Save, Cancel, etc buttons are aligned vertically when a form region is created. How do i align them horizontally? Thanks Mc.Kenzie