I can transfer tracks, but how do I transfer changed track in

For instance, I realized that the track order from some albums was in alphabetical order rather than in the order of the tracks. So I set the track info so that they were in the right order.
And there were also some artists that showed up multiple time because of name misspellings. I changed this as well, in Media Source.
But how do I sync the info on my Xtra so that it recognizes the changes. I haven't found any way to do it.

I loaded Creative Media Source, but decided to just use WMP 0. I do not know if there is any advantage to using CMS, except that I think you can create and load playlists from CMS to your player. I have never known whether just that playlist get loaded or whether the songs get loaded (or reloaded) too....
Either way, I have experienced the same problem you have with trying to change data. Since I didn't have a lot of CDs ripped prior to getting my ZT, I just editted my song info before ripping the CD (after I noticed that some songs had wrong data attached to them).
There is also software called NOTMAD, which is a 3rd party utility that has been highly touted on these boards. I do not know if that software would solve this specific problem though. I am considering gettting a trial version.
Sorry I cannot be more helpful...

Similar Messages

TS1702 I bought Say Hi Translate. How can I change it to translate English to French now that it is installed? It comes up Spanish and French ! Can you tell me how to get this changed?

I bought Say Hi Translate app. How can I change it to translate English to French? It's already installed and it now has Spanish/French after I tried several ways to change it, but originally it came up English to Spanish. Can you tell me how to get this changed? Thanks! JKA

Contact the support or FAQ/user guide for the app on the app creators website if available.

I am receiving a "couldn't load XPCOM" error. I know that I can reinstall Firefox but how do I save my bookmarks?

I am receiving a "couldn't load XPCOM" error. I know that I can reinstall Firefox but when I went to do that it erased all of my bookmarks so I did a system restore. How do I save my bookmarks?

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I smashed my ipod screen today and i know apple can repair it but how should i contact them?

please help, i smashed my ipod screen and i know apple can repair it but i dont get how they will and how to contact them! please help will be thankful!

Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
You can do the exchange at an Apple store
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Or send it to Apple;
Apple - Support - iPod - Service FAQ
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

SAP BRIM Provider Order can be submitted but no contract is created (change process ISTD)

Hi Experts,
This question is related to previous entry SAP BRIM Provider Order does not generate a Provider Contract
Currently provider order (Standard Transaction Type PROV) can be submitted but unfortunately it does not create a provider contract when clicking on "Submit".
No error messages are shown on screen. PPF Actions seems to be ok, as status is green (see attached screenshot)
There are no errors in the order and number range is defined.
Can anyone provide a list of requirements für ISTD process to create a provider contract?
Thank you and best regards
Vanessa

Findings are that asynchronous contract creation should be disabled in customizing "Define Settings for Transaction Types". Additionally there are relevant corresponding SAP Notes: 1925135 (for SP02) and furthermore 1965276 (SP04) because contract process does need the target process type to create a contract (there is an error in SAP Standard).
Best regards
Vanessa

I have created a form saved it then attached it to an email and sent it out. The form arrived and can be opened but how is it returned to me once it is filled in. What steps should the person getting the form follow?

I need help in learning the steps to follow after the fillable form has been filled in and I want to return it to the sender. It arrived as an attachment to an email.

There are various was to return a filled-in PDF form but many require some detailed information about what product the person filling in the form will be using.
As noted above the form can be filled out and faxed or snail mailed to you.
Since Acrobat 3 the form could be submitted to a scripted web page and have the web server perform the tasks necessary to return the data to you.
Since Acrobat 6 the creator could add special "Extended Form Rights" to the form so users with Reader version 5 or better could save the form and email the form.
For mobile devices the app the user will be using will determine how or if the form can be returned.
Do not allow users to use Apple's Preview application on the Macintosh. It will corrupt the form in many ways.

Itunes and no credit card... I know it can be done, but how...?

Could someone please tell me how it is I can do the no credit card on file with an itunes account for my daughters phone? I would like it if she could only get the free apps on her phone and now have access to my account email... I have read it in here once, but of course since it has been awhile, it is not available for me to see when I need it, please, someone share the secret, as I am desperate... Thanks Toni

iTunes Store>Account (in list on right): log in: click 'Edit payment information': in the 'Payment method' list click the 'None' radio button. Click 'Done'.

HT4783 I'm trying to learn how to use Airdrop between my wife's Mac and mine. We both have it, but this article did not help us learn HOW to share files. Yippeee that we can...but HOW?

My wife and I are trying to learn how to use Air Drop. The "tutorial" showed us where it is. It came up. I saw hers (Mac). She saw mine (Mac). But where to go after that is, apparently, in the cloud somewhere. The description says we can share files...which is nice...but nothing tells us HOW to share those files.
Thanks for your help out there...
Dennis

1. Open a new Finder window or use one that's already open
2. Click on Airdrop, press Shift+Command+R, or find "Airdrop" in the "Go" menu
3. Drag your file to the icon of the person you want to send the file to (if you have mountain lion, you can use the share button).
4. The other person has to click "save"
5. The file will send and appear in the receiver's downloads folder
In Mountain Lion, a new feature was added: the share button. It's a button with a picture of a box and an arrow jumping out of it. Click on it and the third (and last) option is "Airdrop" and clicking on it will allow you to send files over Airdrop without opening it in Finder.

I recieved an email(gmail) with a jpeg attachement, i can view it but how do I save it to add to a presentation...I just got an ipad 1 and its my first MAC experience s i have a big learning curve. Thanks

help please

This is off the top of my head, but here goes.
I'm assuming you have Keynote on the iPad.
1- in Mail, press and hold on the image. You should see a pop up that'll say something along the lines of "Save Image". Press Save Image
2- As a sanity check, open the Photos app and look under the album/event "camera roll" or 'saved photos' Make sure said photo is there.
3-In Keynote with a preso open, press the little Picture icon in the upper right. From there, choose "media" choose the 'saved photos' or camera roll' album and then the image.

I just installed lightroom 5, 3 weeks later my computer crashed, I know I can move files but how about the license? I also installed a second copy on a laptop that I used for class

I also installed a second copy on a laptop that I used for class

There is no activation process like there is with Photoshop. So you can just go ahead and install Lightroom again on your new or rebuilt computer.

Keychain was not set up correctly, and i can't figure out how to edit or change the phone number for it. can anyone help?

I did the whole thing when i bought my MBP, now a year or so later its getting more annoying asking for my keychain password aldo keychain seems like a neat feature that i don't want any info texted or sent to the other number i entered.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

My iPhone is still displaying my old Apple ID and I can't figure out how to change it to my new one?

I have an iPhone 4s and it keeps asking me to sign in using my old Apple ID and I have a new(ish) Apple ID that I've been using for several months, since before I even got the iPhone, but it's still not using my new ID. The new ID is on my iTunes and iPod, but isn't on the iPhone. I can't figure out how to edit or change my Apple ID in the settings. Help me?

Hi,
I have the same exact problem, and I see no one has posted a correct answer for you. Alexbird's reply didn't help. Can someone give us the correct answer?
My old email address is on my new iPhone 4s, and I can't change it. In the store on the iPhone 4s it correctly has my new email address. iTunes also correctly has the new email address.
I can't update my apps because the old email address is stuck in there, and no password is being accepted.
(By the way, as much as I attempted to read all of the warnings online about how to back-up and transfer data from my iPhone 3gs to my iPhone 4s, sure enough apps were lost. I wish instructions on 'Fingertips' had been clearer)
Thanks!

I have an IPOD touch 4th generation. When I try to go and buy apps from Itunes and App store it askes for ssecurity codes because it is the 1st time using it. can not remember. How do I reset it or find them?

I have an IPOD touch 4th generation. When I try to buy apps from apps store and Itunes it says this is the 1st time doing it so wants me to answer security questions. Granddaughter put 2 in the ipod but can't remember them. how do i either change them so I know what they are or just take them out again?

Strange; yesterday there was a link via which you could get a reset email sent, but today that link is missing. So if you've forgotten your answers, there is no way around the problem without involving Apple. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to report the issue to the iTunes Store.
Regards.

I was transferred to the US appstore site by following a link. The product was not available there and I was told to go back to the UK site. But how???

I was transferred to the US appstore site by following a link. The product was not available there and I was told to go back to the UK site. But how???

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

How to handle tab change event in UI shell main area

Hi,
I have two tabs(two taskflows) in UI shell main area. one is department tab and another is employee tab. My department tab shows employees department wise. On employee tab I have emplyee table which shows employees jobwise. This employee table has the functionality of adding new record to employee vo as well.
Now i follow these steps.
1. by defualt department tab is open.
2. by clickinng on Tasks menu link i open Employee tab in to main area. Now i have both tabs in main area.
3. at Employee tab I search all employees job = accountant. It shows the search result well.
4. Now i add a new record to it and without saving/deleting this record i move to department tab.
5. at Department tab i search employees where department =20, here no relation b/w job and department.
6. Now i return to employee tab. my newly added record got disappeared. It is there but does not show in table.
How to resolve it??
I have one solution in my mind while changing the tab i can prompt to user "you can not leave the newly added record..either save it or delete it". But how to catch tab change event here? where i can write code to prompt msg to user?
Pls help.
Edited by: 900997 on May 6, 2012 4:10 AM

With apologies for the slow reply, I'm currently travelling.
Two things to note:
1) The af:document uncommittedDataWarning flag was designed to stop users navigating away from half entered records. More about this flag can be found here:
http://docs.oracle.com/cd/E23943_01/web.1111/b31973/af_orgpage.htm#CACDDDFH (see point 4)
http://www.oracle.com/technetwork/developer-tools/adf/unsaveddatawarning-096556.html
....please note our documentation from time to time spells this flag wrong with only one "t" in the word committed, so if you're attempting a bulk search check for this (and I'll raise document bugs to get this fixed in the future).
2) On addressing the ADF UI Shell, if you're switching between "pages" in the UI Shell, as separate to switching between dynamic tabs within a single page using the UI Shell, the UI Shell will actually restart the currently running task flow in the page you're returning too. You can verify this by implementing an initializer on your task flow with a log message, and watching when the initializer is called.
In addressing your last question, at this stage I think you need to assess my first answer then come back if you think you sill need to execute the code on the tab click. I also need to know are you talking about the primary level of tabs that represent each page in the UI Shell, or are you referring to the dynamic tabs within a single UI Shell page that hold your task flows?
CM.

How to prevent PO changes in ME22N after Order acknowledgement?

Hi everyone,
        Can anyone tell me how to prevent PO changes (ANY) in ME22N after Order acknowledgement?
        I would like to make it possible without release strategy process or authorizations.
        Do you know some User Exit or Customazing way?
Regards.
Jaime S.

Dear Jaime S,
You can do this by restricting in authorization SHDO and also by marking "changes not possible after release" in Release strategy procedure.
And also you can navigate the menu to, SPRO------>IMG------>Material Management--->Purchasing(OLME)------->Purchase Order---->Define screen Layouts at Document Level---->And go to ME22n And Select the right parameter and in this you can make it display, optional or required entry for the fields.
Regards,
Manjunath B L

I can transfer tracks, but how do I transfer changed track in

Similar Messages

Maybe you are looking for