I cannot access my online course study with Kaplan

I have to access study recourses but they do not open, there are exams on the site but something is stopping them opening?

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Similar Messages

I cannot access my online banking account. Is this a Loin issue?

I cannot access my online banking account. After talking to the bank and internet provider it was suggested it may be a lion issue (we just upgraded). Can anyone help with this problem?

I tried Google Chrome with the same results. We just downloaded Mountain Lion and I'm thinking that may have changed something. Everything else works but my online account.

I cannot access i cloud on windows7 with my apple id

i cannot access i cloud on windows7 with my apple id

I have had this problem since icloud went live..!!!

I reinstalled whatsapp and now i cannot access my online/last online info, i know my contacts have not deleted me.

i cannot access my online/last online info on my whatsapp, i know that my contacts have not blocked me

I have thank you, they replied that their very busy lol

Cannot access shared external hard drive with other mac accounts

I cannot access a shared external hard drive with other mac accounts (all accounts are on the same macbook Pro). The shared external drive is shared via time capsule and is connected (of course) in USB. I see well this external hard drive as a shared disk with my main account. Yes shared option has been activated with the Airport Utility .. but when I open other account these othe accounts can see the external drive but cannot access to its content that is flagged with a no way sign. Strangely enough when I close my main account and start opening a new session with one of the other account then fine I can access the external hard drive and its content .. BUT then it is from my main account than I cannot access its content the no way sign showing ..
Looks like only one account at a time can access the content of this SHARED external hard drive .. any one as an idea on how to really make it a shared hard drive so that all accounts on the same mac can also access it ? I am at my wit ends on this case. THANKS ..

Results of my enquiries at Apple Genius Bar .. the guys found the problem interesting. They've been unable to provide a fix neither to give any explanation as to the reason why. To be fair I was not much impressed by the technical level demonstrated ..
In the mean time I have found that if account no.1 can see the shared external drive content and in such case account no.2 (same Mac computer) cannot see its content (only the external HD with a no way sign) this account no.2 can UNMOUNT (by ejecting) this external HD from account 1 and then remount it (just clicking on the TC shared part in a finder window) and .. see and access its content ; whilst account no.1 cannot see its content anylonger. Unless it unmounts the shared external HD and remount it .. then account no.2 can see its content anylonger. This can goes on an on.
So eventually YES the TC can allow to share a USB external drive between several accounts and a same Mac .. BUT this require to unmount and remount EACH time the external drive is accessed from a "no.2 account". So OK to share files with seldom access but not practical in case of frequent access needed.
I just I have now to figure how iTunes can automatically unmount and remount a shared external HD when it needs to access one of this shared HD content from on time account no.1 and then next time from account no.2. May be I am asking too much ..

CANNOT ACCESS DOWNLOAD FOR READER EVEN WITH CHANGED PASSWORD

CANNOT ACCESS DOWNLOAD FOR ADOBE READER EVEN WITH A CHANGED PASSWORD AND I HAVE BEEN ON CHAT

There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing!

Network Magic v 5.5 I cannot access the online help from the links within NM

When I try to access the online help from any link button in NM V5.5 including the main help > Help center > Network magic help, the browser will open and resolve address , Status bar will state done but I have a blank page.
The URL in the address bar is
http://go.purenetworks.com/redir/webhelp/nm/_cover.htm?pn=nm&a=5.5.9195.0&as=0&ad=2&bt=shp&b=Pure&dc=Pure0.LinksysRouterSetup&dt=OLN&k=1611759616&ct=cisco&ag=d9429c0fe2fd40b9&g=d04c74e28eb95300%2Cb2610a4f03b2f988&lcid=1033&ulcid=2057&am=99&it=upgrade
I am running windows 7 Ultimate, have tried
Firefox 3.6 and
IE 8.0 -- I have put the Url into the trusted zone and the web page will again show up as done and status bar shows trusted zone
I have tried all this with my Firewall & AV (Kaspersky Internet Security 2010) both on and disabled
NB The "ask linskys link works" as does the "community forums"
The Main help > Help center >Getting Started also works.
( I am running the WRT610N Router set up by Network Magic)
Many Thanks

I've seen this too use http://support.networkmagic.com
Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router.

TA21328 I downloaded a security update and now I cannot access my online banking web site. How do I fix it?

Does anyone have a quick fix for this? I downloaded the latest security update and now I cannot access web page for online banking.

It is not asking what part of your country you are in, but what country/region you are in.
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have set the region in DVD Player five times it cannot be changed.
Instead, use VLC to view videos from different regions:
http://www.videolan.org/vlc/download-macosx.html

HT201413 I cannot access any of my music with my Windows 7 PC after I update iTunes. I keep getting the error message " The song 'ABC' could not be used because the original file cannot be found. Would you like to locate it?", for the 1800 songs that I h

My music library worked fine on my new PC until updated iTunes software. Now I cannot access any of my music anymore. What's happening here?
Any help would be greatly appreciated.
Thank you,
Lisa

Select a broken track and press ctrl-i to Get Info. Look on the summary tab for the location where iTunes "thinks" the file should be. Where is it really? Post back the two locations and I can suggest the best approach.
tt2

Cannot Access Time Capsule or Computer with MobileMe enabled

I have back to my mac set up on my imac but when I connect to a different wifi or tether my phone I cannot access the Time Capsule or Back to my Mac I'm 100% it is set up right this is getting really annoying for an Apple product. I have comcast if thats of any help.
Share disk over wan checked and allow setup over wan but still no dice. I tryed the dyndns way and it configured the dns for my domain I let it use but then it still wouldn't work so I just cancelled that and came back to square one.

Need a bit more info.
Now this is what happens when I plug it in:
Plug it into power?? The main router?? Sorry I am unclear what you are plugging it into.
It sounds like you have not done the setup.
The TC should be in bridge and plugged into the current modem router you have.. and powered on full time.
If you cannot access it via the utility, I strongly suggest you buy the apple usb to ethernet dongle.. which helps air people no end.. or use any other computer that has a real ethernet port.
Otherwise set to factory and start over. (this will not do anything to what you already have on the disk).
Hold in reset and power on the TC.. wait about 10sec until the front led rapidly flashes. .then you can connect the computer.. and do the setup.. choose bridge in the Network section of the utility and update the TC.
Then you can plug it into the main router and access it and internet at the same time.. either by TC wireless or the main modem wireless.
Please note. .Gen1 TC is only going to last very little time.. it is already well past the average lifespan.. many died at 2years.. most gone by 4years.. plan on storing nothing important on it.

Cannot access my own secure network with G4 iBook

I set up a WPA secure network with a AirPort Extreme Base Station. No problem using it with my G4 iMac. However, when I try to access it with a second computer, a G4 iBook laptop, using the same WPA password I use to access it with my iMac, I get an error message.
Using the Setup Assistant with the iBook gives me an "invalid password" message. I know it is the correct password. I set it up and I use it with the iMac!
When the network is unsecured (no password needed) the iBook can access it, no problem.
Please tell me what I need to do to be able to access my own secure network with my iBook. TIA!

The only thing I can think of is the firmware for the AirPort card in the iBook, which is version 9.52. I could not find anywhere in Apple's website how to upgrade this. Does anybody know how to upgrade this firmware?
If there is any firmware update to the card it is done automagically whenever the corresponding AirPort software update is applied. There is no user notification and no way for the user to make updates diretly.

I have a Mac and told to download Firefox to help me access an online course whose website was developed for a windows platform. What do I do to get my Mac to work w/the website?

I'm new to Firefox. I was told to download Firefox to help me access a website I'm to use for a course. Unfortunately, I found the course website says I can't access it w/Mac. It says the Website was developed for a Windows platform. Mac people have told me I can try Firefox. I have and it still doesn't give me access to the course material I need for a job. I'm not sure I'm using Firefox correctly. Any suggestions?

You can try installing the [https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/ User Agent Switcher] add-on. This lets you change your browser's "User Agent" header so that it will tell the server that it is a Windows browser.

Cannot access primary user account - even with Install CD

I’ve been racking my brain trying to figure out how to solve a OSX problem for a friend that ran into some problems on his iMac. For some reason, he wasn’t able to log onto his user account – the only one on this computer. He didn’t try to change his password, but something strange must have happened.
We tried to reset the password with an OS X install disc, but I couldn’t even find, much less access his user account. Thanks to the help of some folks at the Genius Bar of an Apple store, we were able to log onto the Root account and create a new account. I tried t recreate the original user account, but the computer wouldn’t allow it, as that account was already being used. If that user account was still active, why wasn’t I able to reset it with an install disc?
I’ve rebuilt the volumes with Disk Warrior, and repaired permissions with Disk Utilities. I’m at a loss on how to deal with accessing the original user account, which has a lot of important data. I’ve copied the user data to an external drive, and I’m thinking I might be able to import various files – email data, photographs, and various documents, but I’m hoping there be an alternative to what seems like a tedious route. Other than using an install disc to reset the password to the user account it can’t seem to recognize, are there any other ways to gain access to this account?
My friend’s computer is a G4 iMac running, I believe, 10.3.9.

There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing!

Cannot access folders and files even with Administrator rights

Hours & days gone trying to solve niggling issues that Microsoft cannot fix (using the built-in diagnosis tools/compatibility options/MS promises to advise when solutions found). But I am stopped from progress by restrictions to folder & file access preventing self-diagnosis. Why are administrator rights not effective? How do I as Administrator give myself access rights? If not available how do I return to XP and retrieve the cost of Windows 7? Note that the PC compatibility test tool for Win7 upgrade from XP noted no significant problems!

It appears that these are symbolic links and that WIn7 hasn't got the wherewithal to follow the symlink to the real folder to assess the security settings. - Hence everyone's frustration.
For those of us who are extremely technical, we'd like to be able to remove and re-create a link as needed to test a scenario...
I've done it for years with Altos Xenix, SCO Xenix, SCO OS/5, AIX and Linux from Caldera 2.2 through todays versions... Windows has been moving in a direction to incorporate more *nix like concepts as they move away from their DOS orientation, but in the process
they have focused on the "general user" at the expense of the "administrative user" (i.e. "root" in *nix)
I've always wanted to try a stripped down, non-backwards compatible, Windows Server. I'm sure it could be made admin-friendly and allow push updates without spending thousands of dollars on push-update software mechanisms... But so far, they've missed the boat.
I have 1 Win7Prof PC at home, 1 Mac and 2 Debian systems. Both the Win and OS/X systems make it very hard to administer/customize/etc. the OS. The 2 Debian systems give more bang for the buck and don't inhibit the root user at all once you make 2 changes (using
"su root" as a user) in /etc/pam.d to allow logging into the desktop as root.
We can always hope MS will see those of us who recommend server platforms as a market at some point. (Wouldn't it be awesome to have basic *nix constructs available for admins? And "bash" vs. "cmd"?)
I certainly don't see any need to utilize Windows except in those cases where some vendor/site is compatible with MS/IE only. There are a few of them and I rail on them constantly to be platform independent. Our software is. It takes a lot of work, but
we use Apache/MySQL/PHP to deliver our medical practice management application from any of the *nix-OS/X-WinServer server platforms to anyone who has Chrome/FireFox/Safari/Opera/IE or
similar browsers. But administering the server platform under Windows is about 5 times more time intensive to install and about 10 times more time intensive to maintain than *nix platforms.
We have about 200 Linux servers we are able to support with 4 staff. We have about 50 Windows servers we are able to support with 4 staff.
With numbers like that, I don't see us leaning toward Windows in the foreseeable future.

I cannot access my Amazon author account with Firefox but is OK with IE. It has something to do with security. How can I fix this?

When I go to my author account at Amazon.com I have to enter my password into a secure area before I can add books or edit already published Kindle books. With Firefox the secure buttons do not appear, hence no access.
With IE I do not have this problem.

Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time.

I cannot access my online course study with Kaplan

Similar Messages

Maybe you are looking for