I cannot connect BB 8520 with external GPS Holux via Bluetooth. Please Help!
I've bought a M1200 HOLUX gps and I'm trying to sincronize it with a Blackberry Curve 8520. The problem is:
- BB finds correctly M1200 via bluetooth, and sincronizes well with the the PIN
- M1200 Holux appears in bold just a few seconds after sincronization.
- But then, M1200 appears only in plain text (not bold) as it's not connected. In the BB options, it doesn't appear the option "Connect" as with the rest of bluetooth devices.
I've tried several times but always happen the same. M1200 is not able to keep the bt connection.
Could you please help me?
Thanks in advance
http://supportforums.blackberry.com/t5/Java-Development/External-GPS/m-p/535845
Similar Messages
-
Can I use an external GPS Receiver via Bluetooth?
Great phone. I used a Galaxy Nexus for over a year until I got this phone, but once I started using the Z10, I never looked back. The "Hub" is a GREAT feature, exactly what I use most of the time. Oddly enough, I was never much of a BB fan until the Z10.
Anyhow, I have bought several apps and accessories for the Z10. I rely on my Z10 a lot.
I still have (from my old Windows Mobile 6 phone days back several years ago) a perfectly working external GPS receiver that has Bluetooth (Holux GPSlim236). Great little receiver.
Since I often use my Z10 for GPS nagigation (I am using Mireo DON"T PANIC) for directions whilst riding my motorcycle all day long, with Bluetooth enabled to my helmet, having the GPS radio on as well as Mobile (aka phone) and Bluetooth does drain the battery faster than if I could avoid using the internal GPS at this time (I still want to use the internal GPS at other times). I do have a data plan, so I could use the internal maps, however, I often ride through places with no data access (back country).
I was able to pair the Bluetooth GPS Receiver to the Z10 (easy enough), however, there is no option in the "Network Connections" settings area to be able to disable the internal GPS radio, or anywhere else, so I can't tell for sure that this is working (that is, not using internal GPS but using external GPS). I suspect it is not using the external GPS Receiver, though, since Bluetooth settings indicate "no services" for the external Bluetooth device.
Is there a way to sometimes use the external Bluetooth Receiver on the Z10 (in order to save battery on long trips)?
It is also not just for battery power savings, but also when I ride there is no air conditioning, so the phone does get hot, and I suspect would be cooler if I used an external GPS receiver via already-enabled-anyways Bluetooth.
ThanksI am not sure my original message was clear.
I have th Z10, it has GPS software and a built-in GPS radio receiver. I also have an external GPS radio receiver, not a GPS device. It is strictly a radio receiver. I used to use it years ago on my Windows Mobile device - the software with maps was on Windows Mobile, and the GPS receiver hooked up via Bluetooth.
The GPS receiver in the Z10 uses the Z10 battery. I have the Bluetooth on anyhow to connect to my helmet headset. Since Bluetooth is on already, I could save Z10 battery by using the external GPS radio receiver (disable the internal GPS radio receiver), thought the map software would still run on the Z10.
So, the previous response says "does have GPS profile" but also says "external GPS will not work:".
I am not sure the statement was respect to my setup.
What I really need is for the Z10 Bluetooth to see the external GPS receiver, perhaps as a serial device or as a GPS device, howsoever such things work, and for the GPS map software to use the external rather than try to use the internal (the map software should not really care, it should be the OS that virtualises the GPS port). -
Hello,
I have full representation of the Lync 2010 from Outside (i.e. Internet), but I still have small issue related to Lync-to-Exchange integration. Clients who is using Lync client from outside (i.e. Internet) cannot see Exchange-related information including
Call Logs, Voicemail and Calendar information.
Here is the experience and error messages that anyone will see when connecting to Lync server from Outside:
And this is the error message that will be displayed on Lync phone edition devices (a.g. Polycom CX-700) when connected from Internet:
If somebody can suggest what I can try I would appreciate this very much. I do believe that many other people have this issue as well.
Thanks!Hi, we had this issue and I ended up logging a MS support job. Turns out it was the TMG rule/Auth method causing the issue.
Job details:
**Symptom:
Lync Client External User are not able to retrieve the EWS URL
**Troubleshooting:
• We found External users are not able to Retrieve the EWS information in the Lync Client .
• We found the below error in the ETL logs.We found for EWS request we are getting the 401 response
HTTP/1.1 401 Unauthorized ( The server requires authorization to fulfill the request. Access to the Web server is denied. Contact the server administrator. )
• TMG need pass through Authentication
Public names are autodiscover.domain.com and Outlook anywhere External FQDN and paths are /ews/* and /autodiscover/*, OAB/*
Users is All Users, and Delegation is "No delegation but client may authenticate directly" on the corresponding tabs of the publishing rule.
This changes is required for Lync Client as Lync Client does not work well with this BASIC authentication on TMG .
• After TMG engineer changed this settings in the TMG users are able to see EWS information.
RELATED ARTICLES:
Configure Certificates for Servers
http://technet.microsoft.com/en-us/library/gg398995.aspx
Associate a Subnet with a Network Site
http://technet.microsoft.com/en-us/library/gg412804.aspx
Deploy Office Web Apps Server
http://technet.microsoft.com/en-us/library/jj219455.aspx
Reset-CsPoolRegistrarState
http://technet.microsoft.com/en-us/library/jj619172.aspx
Manage Access Edge Configuration for Your Organization
http://technet.microsoft.com/en-us/library/jj552443.aspx
http://technet.microsoft.com/en-us/library/gg182549.aspx
Edge Certificate
http://technet.microsoft.com/en-us/library/gg398409.aspx
Edge Deployment
http://blogs.technet.com/b/nexthop/archive/2012/05/15/lync-server-2010-geographically-dispersed-edge-topology-part-1.aspx
http://blog.schertz.name/2012/07/lync-edge-server-best-practices/
http://blog.schertz.name/2012/04/lync-server-2010-deployment-part-4/
http://technet.microsoft.com/en-us/library/gg425891.aspx
http://blogs.technet.com/b/nexthop/archive/2010/11/17/microsoft-lync-server-2010-protocol-workloads-poster.aspx
MRAS
http://blogs.technet.com/b/dodeitte/archive/2012/06/22/issues-with-mras-and-limited-external-calling.aspx
http://blogs.technet.com/b/ucedsg/archive/2011/05/09/what-can-you-tell-me-about-lync-security.aspx
IIS ARR Configuration for Lync 2013
http://blogs.technet.com/b/nexthop/archive/2013/02/19/using-iis-arr-as-a-reverse-proxy-for-lync-server-2013.aspx
http://social.technet.microsoft.com/wiki/contents/articles/15893.iis-arr-url-rewrite-for-lync-2010-reverse-proxy.aspx
Archiving Options in Lync Server 2013
http://blogs.technet.com/b/dodeitte/archive/2013/04/24/archiving-options-in-lync-server-2013.aspx
http://blogs.technet.com/b/dodeitte/archive/2013/06/02/sample-lync-server-archiving-report-available.aspx
Microsoft Lync Server 2010 Resource Kit
http://www.microsoft.com/en-us/download/details.aspx?id=22644
Microsoft Lync Server 2013
http://technet.microsoft.com/en-us/library/gg398616.aspx
Microsoft Lync Server 2013 RTM Documentation
http://blogs.technet.com/b/nexthop/archive/2012/10/24/microsoft-lync-server-2013-preview-rtm-documentation-now-available.aspx
Release Notes for Lync Server 2013
http://technet.microsoft.com/en-us/library/jj205120.aspx
Integrating Exchange 2013 Preview and Lync Server 2013 Preview
http://blogs.technet.com/b/nexthop/archive/2012/07/23/integrating-exchange-2013-preview-and-lync-server-2013-preview.aspx.
Migration from Lync Server 2010 to Lync Server 2013
http://technet.microsoft.com/en-us/library/jj205369.aspx
Lync Online Resource
http://www.microsoft.com/en-in/download/details.aspx?id=13602 -
HT1695 my iphone cannot connect to any wifi. I have tried everything, please help!
My phone has suddenly stopped connecting to any WiFi. does anyone have any tips I can try?
I've tried everything like switching it off and on, and switching off wifi and back on again, re-setting everything. HELP!iTunes will also NOT recognize my iPod Touch.. I've reinstalled iTunes several times on all THREE of my computers to the same result.. I'm going insane.. The newest iTunes has made it a real hassle!! Before I updated my iTunes both connected just FINE!! Now neither my computers (3 of them) or iTunes will recognize the iphone4, or the iPod Touch. The threads that people are posting to go back to the SAME 6 troubleshooting steps aren't really helping. ANYONE else had the same problem but was able to resolve?? A little desperate here!! HELP!!
-
i had the same problem last week, reset network & all settings and APN and it worked.... same problem again but everything ive tried so far has failed... any suggestions?!
If you haven't already reboot (reset)
hold home/sleep buttond until Apple logo appears
ignore off slider
If that doesn't make any difference try a restore -
Office 365 ECT to Azure Cannot connect to the LobSystem (External System)
I've tried to set up External Content Types to an Azure SQL database but when I access my page I get an error.
I basically followed http://www.pointbeyond.com/2012/12/31/surfacing-data-from-sql-azure-in-sharepoint-2013-online-office-365
Can you help me work out what i've not done, I don't know where to configure Azure firewall as this message suggests. The error is below:
Cannot connect to the LobSystem (External System). Reason: 'Cannot open server 'uf7prto4sj' requested by the login. Client with IP address '157.55.225.241' is not allowed to access the server. To enable access, use the Windows Azure Management
Portal or run sp_set_firewall_rule on the master database to create a firewall rule for this IP address or address range. It may take up to five minutes for this change to take effect. Login failed for user '*REMOVED*'. This session has been assigned a tracing
ID of '9389a67c-dc78-4134-9167-545ec963be3a'. Provide this tracing ID to customer support when you need assistance.'
Correlation ID:9a3fb39c-d0ea-1000-8099-2fad02009a01Hi,
It depends, if it's a static IP address for your machine, it should be OK for this one IP address; if it is a dynamic IP address in a range, you can input the IP address range which contains this mentioned IP address
157.55.225.241, or update the changed address to date.
http://stackoverflow.com/questions/8543653/windows-azure-client-with-ip-address-xxx-xxx-xxx-xx-is-not-allowed-to-access-t
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you
have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support -
Cannot connect to Host with user name J2EE_ADMIN !!!
Hi all,
this exception when deploy from NWDS04s:
<i><b>Caught exception while checking the login credentials for SAP J2EE Engine. Cannot connect to Host with user name J2EE_ADMIN</b></i>
Complete exception:
<i>Result
=> deployment aborted : file:/D:/DOCUME1/VITO1.PAL/LOCALS~1/Temp/temp23237GivaudanNavigation.ear
Aborted: development component 'GivaudanNavigation'/'local'/'LOKAL'/'0.2006.03.20.16.50.48':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [milds2004] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted</i>
Any help will be appreciate. Thx.
VitoHi Nagarajan,
it seems not good
D:\usr\sap\GVD\DVEBMGS01\SDM\program>sdm changepassword "sdmhome=D:\usr\sap\GVD\
DVEBMGS01\SDM\program" "newpassword=ADMIN1"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_java_home=D:/j2sdk1.4.2_09
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_64bit_switch=
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_heap_size=128
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_memory_switch=-Xmx128M
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_com="D:/j2sdk1.4.2_09\bin\java" -X
mx128M -jar "D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>"D:/j2sdk1.4.2_09\bin\java" -Xmx128M -jar
"D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar" changepassword "sdmhome=D:\u
sr\sap\GVD\DVEBMGS01\SDM\program" "sdmhome=D:\usr\sap\GVD\DVEBMGS01\SDM\program"
"newpassword=ADMIN1"
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0005.20051006181702.0000
Initializing Network Manager (50117)
Checking if another SDM is running on port 50118
SDM is integrated in JStartupFramework. No repository changing commands are poss
ible.
Processing error. Return code: 4
Could U help, pls? Thx
Vito -
After a system restart i cannot connect to SAP with SAPGUI.
After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno 00
sid SVI
systemid 324 (IBM iSeries with OS400)
relno 6400
patchlevel 0
patchno 147
intno 20020600
make: single threaded, ASCII, 64 bit
pid 380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c 1100]
shared lib "dw_xml.so" version 147 successfully loaded
shared lib "dw_xtc.so" version 147 successfully loaded
shared lib "dw_stl.so" version 147 successfully loaded
shared lib "dw_gui.so" version 147 successfully loaded
shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00 <
DpShMCreate: sizeof(wp_adm) 10712 (824)
DpShMCreate: sizeof(tm_adm) 3021432 (15032)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 216000 (432)
DpShMCreate: sizeof(vmc_adm) 0 (448)
DpShMCreate: sizeof(wall_adm) (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c 10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00 <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00 < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c 2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c 3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c 2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 404
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 025901
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 025901
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL 2
ACTIVE TRACE COMPONENTS all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low = 0xfffffffffffdb30
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
Unknown at 0x3618
sleepms() at 0x1000f9324
SpinLockSemRq1() at 0x1000f926c
SemRq() at 0x1000fcf6c
ThIPCInit() at 0x1000ac1a0
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
=> CPU Registers:
msr = 0x800000000000f032 iar = 0x0000000000003618
ctr = 0x0000000000003610 lr = 0x09000000000a2890
xer = 0x0000000008000000 cr = 0x000000002a404445
r00 = 0x0000000000000000 r01 = 0x0ffffffffffff3f0
r02 = 0x00000000000000a4 r03 = 0xffffffffffffffff
r04 = 0x0000000000000000 r05 = 0x0000000000000000
r06 = 0x0000000000000000 r07 = 0x0ffffffffffff520
r08 = 0x0000000000000001 r09 = 0x0000000010108003
r10 = 0xb00010000c90e000 r11 = 0xb00010000c90ef30
r12 = 0x0900000000001eb0 r13 = 0x0000000182784a50
r14 = 0x0000000000000002 r15 = 0x00000001810e6c48
r16 = 0x0ffffffffffffb28 r17 = 0x000000018001bf20
r18 = 0x0000000000000003 r19 = 0x0000000000000004
r20 = 0x0000000180c6de34 r21 = 0x0000000180c6de28
r22 = 0x000000018004ce60 r23 = 0x0000000180c6e244
r24 = 0x0000000000000064 r25 = 0x0000000000000158
r26 = 0x0000000000000158 r27 = 0x0000000000000000
r28 = 0x0000000000000000 r29 = 0x0fffffffffffffe0
r30 = 0x09001000a005ec48 r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library |(SRV)PGM |Module |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente Tipo % CPU Funzione Stato
R3_00 QSYS SBS 0,0 DEQW
DISP_WORK SVI00 BCI 5,3 PGM-disp+work CNDW
GWRD SVI00 BCI 10,9 PGM-gwrd RUN
ICMAN SVI00 BCI 1,8 PGM-icman RUN
MSG_SERVER SVI00 BCI 0,0 PGM-MSG_SERVER SELW
RSLGCOLL SVI00 BCI 0,0 PGM-rslgcoll SELW
RSLGSEND SVI00 BCI 0,0 PGM-rslgsend SELW
SAPOSCOL SVI00 BCI 1,0 PGM-SAPOSCOL RUN
SAPSTART SVI00 BCH 0,0 PGM-sapstart EVTW
WATCHDOG SVI00 BCI 0,4 PGM-disp+work SELW
WP00 SVI00 BCI 1,0 PGM-disp+work RUN
WP01 SVI00 BCI 1,0 PGM-disp+work RUN
WP02 SVI00 BCI 1,0 PGM-disp+work RUN
WP03 SVI00 BCI 1,1 PGM-disp+work RUN
WP04 SVI00 BCI 0,9 PGM-disp+work RUN
WP05 SVI00 BCI 0,9 PGM-disp+work RUN
WP06 SVI00 BCI 0,8 PGM-disp+work RUN
WP07 SVI00 BCI 0,6 PGM-disp+work RUN
WP08 SVI00 BCI 0,0 RUN
ACTIVE JOBS OF WORKING SYSTEM
R3_03 QSYS SBS 0,0 DEQW
DISP_WORK TST03 BCI 0,0 PGM-disp+work SELW
GWRD TST03 BCI 0,0 PGM-gwrd SELW
ICMAN TST03 BCI 0,0 PGM-icman SELW
IGS400 TST03 BCI 0,0 PGM-igswd_mt THDW
IGS400 TST03 BCI 0,0 PGM-igsmux_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
IGS400 TST03 BCI 0,0 PGM-igspw_mt THDW
MSG_SERVER TST03 BCI 0,0 PGM-MSG_SERVER SELW
RSLGSEND TST03 BCI 0,0 PGM-rslgsend THDW
SAPSTART TST03 BCH 0,0 PGM-sapstart EVTW
WATCHDOG TST03 BCI 0,0 PGM-disp+work SELW
WP00 TST03 BCI 0,0 PGM-disp+work SEMW
WP01 TST03 BCI 0,0 PGM-disp+work SEMW
WP02 TST03 BCI 2,5 PGM-disp+work RUN
WP03 TST03 BCI 0,0 PGM-disp+work SEMW
WP04 TST03 BCI 0,0 PGM-disp+work SEMW
WP05 TST03 BCI 0,0 PGM-disp+work SEMW
WP06 TST03 BCI 0,0 PGM-disp+work SEMW
WP07 TST03 BCI 0,0 PGM-disp+work SEMW
WP08 TST03 BCI 0,0 PGM-disp+work SEMW
WP09 TST03 BCI 0,0 PGM-disp+work SEMW
WP10 TST03 BCI 0,0 PGM-disp+work SEMW
WP11 TST03 BCI 0,0 PGM-disp+work SEMW
WP12 TST03 BCI 0,0 PGM-disp+work SEMWFollowing your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid SVI
M systemid 324 (IBM iSeries with OS400)
M relno 6400
M patchlevel 0
M patchno 147
M intno 20020600
M make: single threaded, ASCII, 64 bit
M pid 317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c 1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = SVI
C Character encoding = ASCII
C process class = dialog process
C workprocess id = 0
C local host = FRASTEST
C dbhost = FRASTEST
C rdbname =
C dbname = SVIFRASTEST
C dblib = R3SVIDATA
C application server = DVEBMGS00
C Connect type = LOCAL
C pid = 317
C dbjobname = WP00
C dbjobuser = SVI00
C dbjobno = 028178
C wpjobname = WP00
C wpjobuser = SVI00
C wpjobno = 028178
C DB2/400 vers. appl. server = PASE 4
C DB2/400 vers. DB server = V5R4
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = off
C allow_cancel = OFF
C nqe_optimize_method = O - All I/O (compatibility mode)
C query_compl_reval = O
C nte_list_size = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL started with length 64000000 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP started with length 16776192 bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF started with length 40960k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA started with length 16383k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function 5
C Package DDNTFIH Library R3SVIA2062
C Main_Pgm Main_Lib
C Statement_Name "Wx3AAADpDB" Cursor_Name "CADDNTF16461"
C Open_Options x80 Clause_For_Describe N
C Commitment_Control C
C Date_Format USA Date_Separator /
C Time_Format USA Time_Separator :
C Naming_Option SYS Decimal_Point .
C Blocking_Factor 1 Scrollable_Option 0
C Position_Option 0 Relative_Record 0
C Rows_To_Insert 0 Direct_Map N
C Reuse_DA N Name_Check Y
C Use_Ptrs 0 With_Hold N
C Close_File_Name Close_Library_Name *THRESHOLD
C Reopen 0 Use_Perf 1
C Query_Compl. (Reval) ! Statement_Text_CCSID 819
C Sort_Sequence_Table *JOB Sort_Sequence_Library *LIBL
C Language_ID *JOB Allow_Copy_Data S
C Allow_Blocking L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304 performing FET on table DDNTF [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c 93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low = 0xfffffffffffd6f0
=> Stack high = 0xffffffffffffa90
=> Stack Trace:
AixStack() at 0x10008d040
CTrcStack2() at 0x10008d138
ThControl() at 0x1006551a4
dyThControl() at 0x1003ab070
dextIntern() at 0x1003aa06c
sap_dext() at 0x1003aff24
dbeh_exit() at 0x100416924
db_ntab() at 0x10039d48c
read_ntab() at 0x101512474
db_cbufload() at 0x10150f40c
reset_handling() at 0x101512f00
init_shm_and_load_cals() at 0x10151394c
db_cbufinst() at 0x101514c48
db_calinit() at 0x1005ae8bc
db_init() at 0x1001c7ae0
ThCallHooks() at 0x1000c3654
ThIPCInit() at 0x1000ac574
tskh_init() at 0x1000ad704
tskhstart() at 0x1000c0950
DpMain() at 0x10175ad2c
nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library |(SRV)PGM |Module |Function/Statement No.
|--||--
QSYS |QP2USER2 |QP2API |__Qp2Fork 8
QSYS |QP2USER2 |QP2API |runpase_main__FPi 6
QSYS |QP2USER2 |QP2API |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c 355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c 9564]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ? -
Cannot connect Service Manager with Orchestrator Web Service URL
Dear TechNet User,
i cannot connect my service manager console with my Orchestrator Webservice. i try to connect to "http://AMSCO01:81/Orchestrator.svc" ... the user i´ve choose is local admin on the orchestrator Machine.
Thats the Logfile:
Date: 07.10.2013 15:23:16
Application: System Center Service Manager
Application Version: 7.5.2905.0
Severity: Error
Message: Could not connect to the Orchestrator web service.
System.Data.Services.Client.DataServiceQueryException: An error occurred while processing this request. ---> System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
fieldset{padding:0 15px 10px 15px;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;color:#CC0000;}
h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;
background-color:#555555;}
#content{margin:0 0 0 2%;;}
.content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}
-->
</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
at System.Data.Services.Client.QueryResult.Execute()
at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
--- End of inner exception stack trace ---
at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
at System.Data.Services.Client.DataServiceQuery`1.Execute()
at System.Data.Services.Client.DataServiceQuery`1.GetEnumerator()
at Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.OrchestratorRunbookConnector.GetRunbookFolders(OrchestratorContext scoContext, Folder parentFolder)
at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.Connectors.Orchestrator.OrchestratorConnectorHelper.ValidateServerConnection(Boolean found)
System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana, Arial, Helvetica, sans-serif;background:#EEEEEE;}
fieldset{padding:0 15px 10px 15px;}
h1{font-size:2.4em;margin:0;color:#FFF;}
h2{font-size:1.7em;margin:0;color:#CC0000;}
h3{font-size:1.2em;margin:10px 0 0 0;color:#000000;}
#header{width:96%;margin:0 0 0 0;padding:6px 2% 6px 2%;font-family:"trebuchet MS", Verdana, sans-serif;color:#FFF;
background-color:#555555;}
#content{margin:0 0 0 2%;;}
.content-container{background:#FFF;width:96%;margin-top:8px;padding:10px;;}
-->
</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
at System.Data.Services.Client.QueryResult.Execute()
at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
any ideas? Thank you very much!Hi,
I am unable to connect to
http://hostname:81/Orchestrator2012/Orchestrator.svc/ in IE and am getting the same error while creating the connector.
I can connect to orchestrator via http://hostname:81/ but it still gives me the same error when I create the connector (Cannot connect Service Manager with Orchestrator Web Service).
anyone seen it before? -
Regarding Making DB Connect Delta Capable with external Sources
Hi Everyone!
Although as standard DB Connect does not support Delta, this much I have understood. Lately I came across an article from Shreekant Shiralkar and Bharat Patel, BW System Managers, Bharat Petroleum, India in an old BW Expert Article... I have understood that this is from BW 3.0 upwards. Can this be applied to BI 7.0? The Title of the article is "Make DB Connect Delta Capable with External Sources"
Chetan? Edwin? Olivier? Anil? Sandeep? Moderators?
Regards,
PhilipsHi Philips,
I didn't read this article but I'll expose what we have implemented here.
All data coming from non SAP systems are loaded into what I named a "pre staging" database (PSDB) prior extracted to BW. This PSDB is nothing else than a simple, cheap, easy to manage MSSQL server 2000.
Our BW has this PSDB system declared as DBConnect source system.
In few words, we do data cleansing, preparation, formatting in this PSDB when any non SAP data shall be loaded in SAP BW. In addition, we use this machine to perform any R/3 datamigration required for new Rollouts.
Coming back to the delta handling: we don't handle deltas with this DBConnect source system because SAP BW doesn't consider it as delta capable natively.
We develop function modules extractors having the MyBW as source system. MyBW then "think" it is a SAP delta capable source system and we can then setup our MyBW DataSources with any kind of delta type by changing manually the core table ROOSOURCE.
The extractor itself does many things because all structures are handled dynamically and some part of the extractor coding itself is generated on the fly.
The extractor also creates temporary stored procedure directly in the PSDB so that only deltas are delivered to BW.
The core of the extractor, I think everyone would agree, is the OPEN CURSOR statement. The OPEN CURSOR in our case is simply done within an EXEC SQL having our PSDB connection open.
I could discuss this approach at length but we are now running this for more than 3 years (of course a certain effort has been done initially) to our full satisfaction.
I am now finalizing the next "generation": having the PSDB server posting itself, deltas to the MyBW TRFC queue, emulating some how a LO/LIS DataSource.
hope this shed light (at leas mine...)
Olivier. -
I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?
I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?
-
HT204053 i cannot connect the icloud with my Imac
i cannot connect the icloud with my Imac
Go to System Preference and click 'iCloud'. Then, just login with your apple account and click on items you want to activate. (like mail, notes, and photo stream)
-
TS1286 Cannot connect to internet with USB
I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?
Hi bikernblondie,
When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
- O.C. -
HT1222 I cannot connect Iphone 5 with itunes store.
I cannot connect Iphone 5 with itunes store.
I couldn't earlier but it seems OK now. Possibly it was down temporarily?
-
I cannot connect my I pad mini and iPhone using Bluetooth.
I cannot connect my I pad mini and iPhone using Bluetooth.
I'm not sure what made you think that that was not what Regal trail was asking... I am having the same problem and wish that that question had been answered! I believe I've gone through the same steps that used to work, to no avail now. But I'm betting that you (Chris) have the answer to this!
In a nutshell: I'm trying to share my iPhone's cellular connection with my WiFi-only iPad Mini, using a Bluetooth connection. I used to do this regularly, but went for a period of time without the need for it, and so am hard pressed now to identify which thing that might have changed during the interim would have made it no longer work.
iPhone is connected to internet via cellular data (AT&T LTE). Bluetooth is on. Personal Hotspot is on.
On iPad, Bluetooth is on. My iPhone shows up in the list under My Devices, and I can select it, and it will connect for approximately 5 seconds. The shared connection icon shows up on the iPad. The iPhone (on the Bluetooth screen) shows, for those 5 seconds, that the iPad is connected, but the shared connection status bar never shows up on the iPhone.
After 5 seconds, it disconnects.
Thoughts? Need more info? Let me know! Thanks.
Maybe you are looking for
-
Xorg 1.6, nvidia brokenness w/ dual monitors [SOLVED]
Hi, I upgraded this past week to xorg-server 1.6.1-1, nvidia 180.44-1, and kernel26 2.6.29.1-4. When I rebooted today I found a few things are broken: I have a laptop and external monitor dual screen setup where each screen is a separate x screen, a
-
Use dot matrix printers for printing text reports in Reports 10g
In Forms 6i, customers had the option to use dot matrix printers for printing text reports. I believe, from 9i onwards, text based reports aren't supported and instead HTML/PDF,DOC,RTF reports are supported which are not text based and use modern day
-
We are planning a 2 node RAC cluster with nodes in two room on a single site. The shared storage will be on a SAN which is replicated/mirrored (via the SAN) to a second SAN in the second room. Setup room A :- Node A SAN A room B :- Node B SAN A Room
-
trying to install my ipod cd on my pc.comes up error #0x80040707 and it says access denied,please help
-
How to reinstall OS X 10.1.1
After upgrading to OS 10.1.1 my system is not working well. how can I reinstall the OS?