I cannot ping any VIP from within the ACE or from rservers

I cannot ping any VIP from within the ACE or from rservers. Is this expected? I have rservers in other serverfarms that need to be able to communicate with the VIP of other serverfarms. Any help is greatly appreciated.

Thanks for you reply. here is the config. I removed other rserver and serverfarm config that does not have to do with this issue.
logging enable
logging fastpath
logging standby
logging console 4
logging timestamp
logging trap 4
logging history 4
logging buffered 4
logging persistent 4
logging monitor 4
logging device-id hostname
logging host 172.26.254.185 udp/514
logging host 172.26.221.25 udp/514
access-list INBOUND line 8 extended permit ip any any
access-list INBOUND line 16 extended permit icmp any any
access-list INBOUND line 24 extended permit tcp any any
access-list INBOUND line 32 extended permit udp any any
access-list ORADB line 8 extended permit tcp any any
probe http CITRIX
interval 30
passdetect interval 15
passdetect count 6
open 1
probe tcp HYPERION
port 19000
interval 2
faildetect 2
passdetect interval 2
passdetect count 2
receive 2
open 1
probe icmp PROBE_SERVICE_ICMP
interval 5
passdetect interval 5
probe tcp W15SPSWFET001_PROBE
interval 5
passdetect interval 5
connection term forced
open 1
parameter-map type connection TIMEOUT
set timeout inactivity 43200
parameter-map type http test
persistence-rebalance
set header-maxparse-length 2006
rserver host w0bairwatch003
description MDM-SEG
ip address 172.20.60.73
inservice
rserver host w0bairwatch004
description MDM-SEG
ip address 172.20.60.74
inservice
rserver host w0bairwatch005
description MDM-DEVICE
ip address 172.20.60.75
inservice
rserver host w0bairwatch006
description MDM-DEVICE
ip address 172.20.60.76
inservice
rserver host w0bhamobile001
description Lotus Notes Traveler Server
ip address 172.20.60.57
inservice
rserver host w0bhamobile002
description Lotus Notes Traveler Server
ip address 172.20.60.58
inservice
serverfarm host MDMDEVICE
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bairwatch005
    inservice
rserver w0bairwatch006
serverfarm host MDMSEG
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bairwatch003
    inservice
rserver w0bairwatch004
    inservice
serverfarm host TRAVLR
predictor leastconns
probe PROBE_SERVICE_ICMP
rserver w0bhamobile001
    inservice
rserver w0bhamobile002
    inservice
class-map match-all MDMDEVICE-VIP
2 match virtual-address 172.20.48.35 any
class-map match-all MDMSEG-VIP
2 match virtual-address 172.20.48.33 any
class-map type management match-any REMOTE_ACCESS
description Remote access traffic match
201 match protocol ssh any
202 match protocol telnet any
203 match protocol icmp any
204 match protocol https any
205 match protocol http any
206 match protocol xml-https any
207 match protocol snmp any
class-map match-all TRAVLR-VIP
2 match virtual-address 172.20.48.34 any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
    permit
policy-map type loadbalance first-match MDMDEVICE
class class-default
    serverfarm MDMDEVICE
policy-map type loadbalance first-match MDMSEG
class class-default
    serverfarm MDMSEG
policy-map type loadbalance first-match TRAVLR
class class-default
    serverfarm TRAVLR
policy-map multi-match CLIENTS-VIPS
class MDMDEVICE-VIP
    loadbalance vip inservice
    loadbalance policy MDMDEVICE
    loadbalance vip icmp-reply active
class MDMSEG-VIP
    loadbalance vip inservice
    loadbalance policy MDMSEG
    loadbalance vip icmp-reply active
class TRAVLR-VIP
    loadbalance vip inservice
    loadbalance policy TRAVLR
    loadbalance vip icmp-reply active
interface vlan 48
ip address 172.20.48.10 255.255.255.0
access-group input INBOUND
access-group output INBOUND
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input CLIENTS-VIPS
no shutdown
interface vlan 60
ip address 172.20.60.10 255.255.255.0
access-group input INBOUND
access-group output INBOUND
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
ip route 0.0.0.0 0.0.0.0 172.20.48.1

Similar Messages

I cannot upload to youtube from within the iMovie or the files exported to the finder. Any ideas?

Upgraded to Mavericks and iMovie 10 on a mid 2012 MBP. I cannot upload to youtube from within the app or the files exported to the finder. Any ideas?

Upgraded to Mavericks and iMovie 10 on a mid 2012 MBP. I cannot upload to youtube from within the app or the files exported to the finder. Any ideas?

HT2513 I have a message that I cannot eliminate. "The Anniversary calendar does not support events". I cannot find any event associated with the anniversary calendar. In fact I have deleted the anniversaries from my calendar. any ideas?y

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

I have started to use ICal and yesterday started to receive a message "The Anniversary valendar does not support events". I have searched my calendar events and cannot find any event associated with the anniversary calendar. I have turned off the anniversary calendar and deleted fro my calendar and the message still occurs. The MacBook Pro that I sync does not have this message. Even when ICal is turned off the message still occurs. Any ideas?

Any way to know where a clip came from within the source clip?

Using Premiere Pro CS4, Version 4.2.1, on an i7 based PC.
I would like to be able to see where a clip on the timeline came from within the clip in the source monitor. Where ever there is information about the clip on the timeline, it only seems to tell me it's 'Start', 'End' and 'Duration' in relation to the current Sequence, but nothing relating to the 'In' or the 'Out' points within the source clip.
Is it possible to read this somewhere, rather than having to replay the clip in the source monitor to discover the in and out points? It tends to be tedious doing this too often.
Thanks in advance, hopefully.
Peter.

Awesome sauce Shooter
That is exactly what I wanted to know.
Much appreciated!!!
Peter

Whenever I use the trackpad on my 17" Macbook Pro (2010 model) there is a small, trebly processor sound coming from within the enclosure.

Whenever I use my trackpad, there is a whirring, trebly sound coming from within the computer itself. It happens also when webpages are loaded or programs are compiled, but not when I use the keyboard or when the computer is in disuse. It has become louder over time, and it is obvious that when the computer senses input from the trackpad and must translate it, the sound is produced. Is there any way to reset the firmware or an option on the Settings menu that could perhaps help? I am concerned that it is a symptom of a larger problem. Thanks.

The question mark means the computer cannot find a bootable volumes so can;t do anything, That, combined with annoying sounds, strongly suggests a failed hard drive.
You can ask a "genius" at an Apple Rtail Store to test it but I'm pretty sure the drive is kaput. I'm hoping you had your data backed up.

Cisco C6500 CSM - Real server cannot ping its VIP.

I've been running into an issue with Cisco CSM for a number of years, but always found a way around it. Im attempting to get to the bottom of this to find out once and for all, if this is infact a limitation of the device, or a config issue/work around is possible.
Here is my situation. My CSM's are configured in bridging mode. Traffic works great, traffic bridges across vlans correctly. Everything works and have many instances of smilar configurations running in production. Every once and a while, a client requests that a "real" server (ie LWCMW-021)
cannot ping its VIP address (10.95.88.68). I am assuming this is related to the NAT Server, but not 100% sure. Clients have requested this functionality for some type of application based purpose, but Im unaware if CSM in bridging mode can provide this or not.
Any suggestions?
real LWCMW-021
address 10.95.88.59
inservice
real LWCMW-022
address 10.95.88.60
inservice
serverfarm LWCMW-80
nat server
no nat client
real name LWCMW-021 80
inservice
real name LWCMW-022 80
inservice
probe HTTP-80 (defined elsewhere)
vserver LWCMW-80
virtual 10.95.88.68 tcp WWW
vlan 120
serverfarm LWCMW-80
persistent rebalance
inservice

Sorry for giving false hope. It is only possible in ACE module. In case of CSM I believe we can only use workaround.
In case of ACE we can bind the Virtual IP to mutliple vlan. In that case we see a ARP entry like this.
10.10.10.111    e0.5f.b9.a1.72.2b vlan345   VSERVER    LOCAL     _         up
10.10.10.111    e0.5f.b9.a1.72.2b vlan346   VSERVER    LOCAL     _         up
As Virtual IP is not bound to a particular vlan in case of CSM it does not work here, but I can say for sure it is expected behavior.
The logic would be that the server tries to resolve the ARP for Virtual IP and it does not get a response.
In my case virtual ip is 10.10.10.111 before applying policy on ACE you can see that it is exhibiting the same behaviour.
Time     | Vmware_b4:72:11                       | 10.0.0.0                              | 10.10.10.4                            |
|         |                   | Broadcast         |                   | 224.0.0.1         |                   | 224.0.0.22        |
|0.000    |         Who has 10.10.10.11           |                   |                   |                   |                   |ARP: Who has 10.10.10.111? Tell 10.10.10.11
|         |(0)      ------------------> (0)      |                   |                   |                   |          |
|0.999    |         Who has 10.10.10.11           |                   |                   |                   |                   |ARP: Who has 10.10.10.111? Tell 10.10.10.11
|         |(0)      ------------------> (0)      |                   |                   |                   |                   |
|         |                   |                   |                   |                   |(0)      ------------------> (0)      |
|1.998    |         Who has 10.10.10.11           |                   |                   |                   |                   |ARP: Who has 10.10.10.111? Tell 10.10.10.11
|         |(0)      ------------------> (0)      |                   |                   |                   |                   |
|3.014    |         Who has 10.10.10.11           |                   |                   |                   |                   |ARP: Who has 10.10.10.111? Tell 10.10.10.11
|         |(0)      ------------------> (0)      |                   |                   |                   |                   |
|4.014    |         Who has 10.10.10.11           |                   |                   |                   |                   |ARP: Who has 10.10.10.111? Tell 10.10.10.11
|         |(0)      ------------------> (0)      |                   |                   |                   |                   |
Hope that helps.

Need HELPS! ASA 5505 8.4 Cisco VPN Client cannot ping any internal host

Hi:
Need your great help for my new ASA 5505 (8.4)
I just set a new ASA 5505 with 8.4. However, I cannot ping any host after VPN in with Cisco VPN client. Please see below posted configuration file, thanks for any suggestion.
ASA Version 8.4(3)
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 172.29.8.254 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 177.164.222.140 255.255.255.248
ftp mode passive
clock timezone GMT 0
dns server-group DefaultDNS
domain-name ABCtech.com
same-security-traffic permit inter-interface
object network obj_any
subnet 172.29.8.0 255.255.255.0
object service RDP
service tcp source eq 3389
object network orange
host 172.29.8.151
object network WAN_173_164_222_138
host 177.164.222.138
object service SMTP
service tcp source eq smtp
object service PPTP
service tcp source eq pptp
object service JT_WWW
service tcp source eq www
object service JT_HTTPS
service tcp source eq https
object network obj_lex
subnet 172.29.88.0 255.255.255.0
description Lexington office network
object network obj_HQ
subnet 172.29.8.0 255.255.255.0
object network guava
host 172.29.8.3
object service L2TP
service udp source eq 1701
access-list VPN_Tunnel_User standard permit 172.29.8.0 255.255.255.0
access-list VPN_Tunnel_User standard permit 172.29.88.0 255.255.255.0
access-list inside_access_in extended permit icmp any any
access-list inside_access_in extended deny tcp any any eq 135
access-list inside_access_in extended deny tcp any eq 135 any
access-list inside_access_in extended deny udp any eq 135 any
access-list inside_access_in extended deny udp any any eq 135
access-list inside_access_in extended deny tcp any any eq 1591
access-list inside_access_in extended deny tcp any eq 1591 any
access-list inside_access_in extended deny udp any eq 1591 any
access-list inside_access_in extended deny udp any any eq 1591
access-list inside_access_in extended deny tcp any any eq 1214
access-list inside_access_in extended deny tcp any eq 1214 any
access-list inside_access_in extended deny udp any any eq 1214
access-list inside_access_in extended deny udp any eq 1214 any
access-list inside_access_in extended permit ip any any
access-list inside_access_in extended permit tcp any any eq www
access-list inside_access_in extended permit tcp any eq www any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq 33
89
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq sm
tp
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq pp
tp
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ww
w
access-list outside_access_in extended permit tcp any host 177.164.222.138 eq ht
tps
access-list outside_access_in extended permit gre any host 177.164.222.138
access-list outside_access_in extended permit udp any host 177.164.222.138 eq 17
01
access-list outside_access_in extended permit ip any any
access-list inside_access_out extended permit icmp any any
access-list inside_access_out extended permit ip any any
access-list outside_cryptomap extended permit ip 172.29.8.0 255.255.255.0 172.29
.88.0 255.255.255.0
access-list inside_in extended permit icmp any any
access-list inside_in extended permit ip any any
access-list inside_in extended permit udp any any eq isakmp
access-list inside_in extended permit udp any eq isakmp any
access-list inside_in extended permit udp any any
access-list inside_in extended permit tcp any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool ABC_HQVPN_DHCP 172.29.8.210-172.29.8.230 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm history enable
arp timeout 14400
nat (inside,outside) source static orange interface service RDP RDP
nat (inside,outside) source static obj_HQ obj_HQ destination static obj_lex obj_
lex route-lookup
nat (inside,outside) source static guava WAN_173_164_222_138 service JT_WWW JT_W
WW
nat (inside,outside) source static guava WAN_173_164_222_138 service JT_HTTPS JT
_HTTPS
nat (inside,outside) source static guava WAN_173_164_222_138 service RDP RDP
nat (inside,outside) source static guava WAN_173_164_222_138 service SMTP SMTP
nat (inside,outside) source static guava WAN_173_164_222_138 service PPTP PPTP
nat (inside,outside) source static guava WAN_173_164_222_138 service L2TP L2TP
object network obj_any
nat (inside,outside) dynamic interface
access-group inside_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 177.164.222.142 1
route inside 172.29.168.0 255.255.255.0 172.29.8.253 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server Guava protocol nt
aaa-server Guava (inside) host 172.29.8.3
timeout 15
nt-auth-domain-controller guava
user-identity default-domain LOCAL
http server enable
http 172.29.8.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set Remote_VPN_Set esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set Remote_vpn_set esp-3des esp-md5-hmac
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto dynamic-map outside_dyn_map 20 set ikev1 transform-set Remote_VPN_Set
crypto dynamic-map outside_dyn_map 20 set reverse-route
crypto map outside_map 1 match address outside_cryptomap
crypto map outside_map 1 set peer 173.190.123.138
crypto map outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5
ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ES
P-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 1 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable outside
crypto ikev1 enable outside
crypto ikev1 policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 172.29.8.0 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside vpnclient-wins-override
dhcprelay server 172.29.8.3 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
group-policy ABCtech_VPN internal
group-policy ABCtech_VPN attributes
dns-server value 172.29.8.3
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value VPN_Tunnel_User
default-domain value ABCtech.local
group-policy GroupPolicy_10.8.8.1 internal
group-policy GroupPolicy_10.8.8.1 attributes
vpn-tunnel-protocol ikev1 ikev2
username who password eicyrfJBrqOaxQvS encrypted
tunnel-group 10.8.8.1 type ipsec-l2l
tunnel-group 10.8.8.1 general-attributes
default-group-policy GroupPolicy_10.8.8.1
tunnel-group 10.8.8.1 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 remote-authentication certificate
ikev2 local-authentication pre-shared-key *****
tunnel-group ABCtech type remote-access
tunnel-group ABCtech general-attributes
address-pool ABC_HQVPN_DHCP
authentication-server-group Guava
default-group-policy ABCtech_VPN
tunnel-group ABCtech ipsec-attributes
ikev1 pre-shared-key *****
tunnel-group 173.190.123.138 type ipsec-l2l
tunnel-group 173.190.123.138 general-attributes
default-group-policy GroupPolicy_10.8.8.1
tunnel-group 173.190.123.138 ipsec-attributes
ikev1 pre-shared-key *****
ikev2 remote-authentication pre-shared-key *****
ikev2 remote-authentication certificate
ikev2 local-authentication pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect ftp
inspect netbios
smtp-server 172.29.8.3
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:6a26676668b742900360f924b4bc80de
: end

Hello Wayne,
Can you use a different subnet range than the internal interface, this could cause you a LOT of issues and hours on troubleshooting, so use a dedicated different Ip address range...
I can see that the local Pool range is included into the inside interface Ip address subnet range, change that and the related config ( NAT,etc, ) and let us know what happens,
Regards,
Julio
Security Trainer

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the inst

I am trying to update ITunes from 10.4 to 10.5 I have tried from both the program, and from a download on Apple's website. Regardless, I get the following error messages: (1) Installation package for iTunes cannot be found. Try installing to find the installation package 'iTunes.msi' in a folder from which you can install iTunes. I can't find this folder. I have tried to completely unistall iTunes through the Control Panel, but it wouldn't let me: I tried going directly to the files themselves, but cannot uninstall. Any help would be greatly appreciated. System OS: Win XP SP 3.

Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.

Create fixed assets from within the transaction for creating the purchase order

Hello All,
I have gone through the notes on help.sap.com related to automatic creation of asset master record at the time of creating purchase order. I am not sure how do we achieve this?
Link to the notes on help.sap.com
SAP Library - Asset Accounting (FI-AA)
Any suggesstions from the expert group is appreciated.
Thank you,
Vinay

Hi Vinay
I know there is a feature whereby you assign asset classes per material group and then you create assets from within the PO. I never used it though
Let me tell you one thing or rather ask you. Will you as a finance consultant be willing to let a MM guy create the assets??
Or will a MM guy be willing to create it?? If you allow them, you should be ready for surprises.
Honestly, this is a feature not worth exploring unless a FI guy is willing to create the PO. I would suggest the creation of asset masters should be with FI only
Br. Ajay M

Making an RFC call from within the VM container

Hi all,
since a long time I am searching for information on how to implement an RFC call from within the VMC. The problem is that we have implemented several (p)functions in ABAP and we need to implement them in JAVA.
Now I am searching for a way how to just call the already existing pfunctions???
Is it possible to read CRM DB tables too?
Thank you in advance
Boris

Hi Freeto,
This may be due to the Network Failures.
If you have triggered a job then because of the Network fluctuations the system may not respond properly and cannot execute the job.
So, this is the cause for the failure.
Hope you understood.
With Regards,
Ravi Kanth

Need to start JINI registrar instance from within the code

HI All,
I need to write JUnits for our app using JINI for which we need to start JINI registrar from within the code and then publish some services to it.
Any idea how we could be starting the JINI registrar from Java Code ? Any thoughts/suggestions/pointers would be highly appreciated.
Thanks in advance
Vikram

Hi Senthil,
You can directly call the outer class method. Otherwise use the following way MyDialog.this.close(); (But there is no close() method in Dialog!!)
If this is not you expected, give me more details about problem.
(Siva E.)

Launch Copy Package for OWNERSHIP app from within the FINANCE app

Is it possible to launch the standard COPY package from within another application?
My case is:
I have an OWNERSHIP application with the standard dimensions ENTITY,TIME,CATEGORY,OWNACCOUNT,INTCO. I would like to copy my ownership data from one period to another as it is faster than doing data input for all my entities
Now the challenge:
I would like to launch this standard COPY package that copies OWNERSHIP data from within the FINANCE application. Otherwise the user always needs to switch from applications.
I know it was possible in v4, but I seem to forget something when trying it v7.0 SP7.
Any help is much appreciated

Dear Shoba,
I tried the following macro
Sub copytest()
Application.Run ("MNU_eData_SelectPackage(""Copy"",""system files/Copy.dtsx"",""Company"",""Ownership"")")
End Sub
When I was in the legalapp, copy package was opened but with the dimensions of the legalapp
When I changed of to the ownership and tried the macro again, it gave me the good dimensions, but that was not the purpose
When I copied the package and changed the %APP%ù it didnt work either
I even changed %dim% to ownaccount,time,category,legalentity,intco and then the good dimensions appeared when launching the package but he gave an error when selection ownaccount, as it is not a dimension of the legalapp.
Do you see other possibilities?
br,
Benjamin

Currently logged in from within the app itself

I need to find out who or how many users are currently logged into my app from within the app itself and display it within a report for the app administrators. Any thoughts or ideas.

For an answer to this question see this discussion.
query apex users and their session
query apex users and thier session
Todd

Possibility to abort the execution from within the PreUUT and MainSequence

Hello,
This is probably a TS newbie question that most of you can answer right away!
I'm using the sequential model to develop my test. I cannot figure out how to do terminate the execution from within the PreUUTLoop or MainSequence callback.
In the PreUUT you can manipulate the parameter ContinueTesting to indicate to the process model that you want to stop testing.
For the PreUUTLoop and MainSequence callback this parameter is not available.
I could modify the process model itself to also supply me this parameter for the PreUUTLoop and the MainSequence. (and check for it on return from these callbacks)
But, I was wondering, is there another (maybe even better) way to do this?
Thanks for the help!
noxus.

Thanks, that's what I was looking for.
One extra question:
- From the PreUUTLoop callback it is working fine. (immediately stops the execution)
- From the MainSequence callback I still get the popup message "Next UUT" or "Terminate". Can I avoid this popup message and just Terminate the execution? (preferably without modifying the process model)
or, another alternative is that I disable the "Test UUT" entry point and only allow the user to select "Single Pass". Is that possible? Is it possible to disable the "Test UUT" entry point for the sequential process model?
Message Edited by noxus on 02-22-2007 04:17 AM

How can we get a url for a "Meet Now" conference call from within the Windows Store App?

Hi,
Is it possible to get the url for the current meeting / new "Meet Now" call from within the Windows Store app?
You have the option of inviting your current Lync contacts, but I don't see a way of giving a URL to clients that would launch Lync on their device, or take them to the web app.
I can see how to get the link using the Outlook plugin, for pre-scheduled meetings. Is this link always the same and the one that should be used for an impromptu "Meet Now" meeting? It would still be good to know how to get this URL from within
the store app so I can tell clients where to get it.
Some people may be on Windows RT devices and not have access to the plugin in Outlook, and want to start a meeting at short notice and then invite others via email or pasting a link to them elsewhere.
Any help appreciated.
If I have answered your question, please mark it as the correct answer. If I have provided helpful information, please mark it as so.

Hi,
Agree with Holger, I check on my Lync Windows Store app and can't find the meeting URL as well.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I cannot ping any VIP from within the ACE or from rservers

Similar Messages

Maybe you are looking for