I cannot restore my iPhone 4. Yesterday I switched it off via "find my iPhone" and ever since I cannot turn it on. I tried to restore it via iTounes, but it doesn't recover. What can I do???

Is there anything I can do??

Hi Ina-mar,
Welcome to the Support Communities!  If you are unable to restore your iPhone, follow the steps in the article below:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201263
Use recovery mode
You might need to use recovery mode to restore your device in these cases:
iTunes doesn't recognize your device or says it's in recovery mode.
You see the Apple logo onscreen for several minutes with no progress bar.
You see the Connect to iTunes screen.
Learn what to do if you see the progress bar onscreen for several minutes.
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. 
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
I hope this information helps ....
- Judy

Similar Messages

  • I plugged my iPhone that is only one motnh old into the wall charger and ever since it wont turn on...

    Just the title is all i have to say, luckily I have insurance for it, but anyone know why this happened?

    Hold the HOME and SLEEP buttons at the same time for 10 seconds or so; an Apple logo should appear, showing the phone is rebooting.

  • My iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

    my iPod touch isn't working correctly.it is displaying a white light and no matter what i try it isn't helping.tries holding the reset and power button together and tryed holding the power button in but it doesn't work. please can someone help?

    Try the remaining items in the white-screen topic of.
    iPod touch: Hardware troubleshooting
    If not successful. let the battery fully drain and then charfe for an hour and try again.
    Frequently a white scree nis due to a hardware problem.

  • I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

    Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable")  and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
    I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
    If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
    iPhone 4s iOS 5.1.1 (9B206)
    Carrier AT&T 12.0
    Modem Firmware 2.0.12

  • I downloaded ios 6 software to my iphone 4s and ever since i cannot get sky email to my iphone, anyone have a solution please?

    I downloaded ios 6 software to my iphone 4s and ever since i cannot access my sky email, anyone have a solution?

    Download latest iOS (5.1.1) to your desktop.
    Turn off your iPhone.
    Open iTunes
    Connect your iPhone to iTunes while you are holding home button. Hold it until iTunes logo appears on iPhone.
    iTunes will show you "Restore message"
    Hold "alt" button while you are click on restore.
    Now just choose 5.1.1 ipsw you downloaded.
    Your iPhone will be restored to 5.1.1
    In a future, don't try beta softwares if you are not developer

  • I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

    I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

    OK, lets do a complete overhaul to make sure it's working ok.
    First to check your Windows system file for any corruption:
    Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
    type in
    sfc /scannow
    let Windows fix any system files that need to be repaired.
    Restart the computer.
    Start iTunes and see if it is ok.
    If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    (Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • IPod 5th Gen says it is synchronizing, but it doesn`t. What can I do?

    I have been gifted a used iPod 5th Gen, and at first everything worked fine, it charges, when connected to my computer, the first sync was also fine. Now I have added some new songs to my iTunes  and want to put them also on the iPod.
    Here comes the problem:
    when I connect it to the computer, it starts charging, it also says, it is synchronizing, but only for a few seconds.. The new songs are not on the iPod.
    Tried to set it back, but the problem is still there..
    What can I do?

    Hi 747er,
    Welcome to the Apple Support Communities!
    I understand that you have an iPod nano that you would like to add more music to from your computer, but the syncing finishes without moving the music to your iPod. In this situation, I would recommend reading over the attached article that explains how to sync your content, to ensure that your sync settings are correct. 
    Sync your iPhone, iPad and iPod with iTunes using USB - Apple Support
    Best regards,
    Joe

  • I'm trying to install the iOS 7 but it doesn't work how can I install it?

    I can't install my iOS 7 it doesn't work how can I install
    It?

    I suggest you scroll down and use the "Update your device using iTunes" method here:
    http://support.apple.com/kb/HT4623

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • When I try to export pictures of the night sky in Lightroom, they always look brighter than they are in the preview and are filled with white noise/grain. I've tried changing my color management settings, but to no avail. What can I do to fix this?

    imgur: the simple image sharer
    That's the picture^
    Also, doing noise reduction ruins the colour.
    Why can't it just export properly...

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • I am on verizon and ever since ios7,  cannot use the personal hotspot

    On an iPhone 5, before iOS 7, I had no problem connecting to my iphones personal hotspot via WiFi.
    Then t upgraded to iOS 7, and it would connect to the hotspot, but windows 7 would say limited or no connectivity. Note no changes were made to the windows 7 machine. My nexus 7 and kindle fire also had trouble connecting. They'd show being connected to the iPhone, but you'd either get no internet or very slow internet.
    I then upgraded to a 5s. Same exact problem exists.
    I've tried resetting the network settings on the iPhone without any luck. I've tried disabling and enabling the wireless adapter on the window's machine, and that did not work either.
    I have verified that the iPhone itself does have LTE connectivity, and speed test showed a very fast connection, in fact.
    I've seen posts about updating your APN settings, however I believe Verizon blocks you from being able to change the apn-theres no way to get to it from settings on the iPhone.
    Any ideas? I'm sure there are a ton of Verizon ios7 users, and since this problem occurred on two different phones even, I'd have to think this is a widespread problem.

    I have reset my phone a large number of times. It doesn't work. I am now reseting and setting it up as a new phone every 2 days. It works for a while and then teh cycle repeats.

  • I have a huge problem! I've forgot my Ipod touch password, so I tried it a few times! Now my Ipod is disabled. So I affiliated the ipod to itunes but it doesn't work, I can't restore it! So what should I do?

    I have a huge problem! I've forgot my Ipod touch password, so I tried it a few times! Now my Ipod is disabled. So I affiliated the ipod to itunes but it doesn't work, I can't restore it! So what should I do?

    Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • HT4061 I have an iphone 3gs - the new ios 6.1 (?) upgrade has inabled my phone. I get a white apple on the screen. can't reset phone - doesn't work. what can I do besides take phone into Apple?

    I have an iphone 3gs - yes, an older iphone. 
    This morning apple had a msg that asked if I wanted to upgrade to the new ios 6.1 (?).  I said yes.  Now I can't use my phone.  I've tried hitting the power and other buttons.  I get a white apple on the screen. can't reset phone - doesn't work. what can I do besides take phone into Apple?  This *****!  I realize (now from reading internet) that my phone/system may be uncompatible.  Help!

    I have a 3GS (a true classic design!) and have upgraded it to 6.1 today.  The process did not go without a glitch - it took a few attempts to get the app's to sync but after detecting the ones causing an issue and deleting them it works - so far!  I have had issues about 50% of the numerous times a new OS is uploaded to this phone and always take the new OS with trepidation.  But at least you know there is a 3GS with 6.1 working OK.
    I suggest you do a fresh restart to the phone several times - without it being connected to the computer - to see if it gets its act together and starts.  I think it will.  Hold down the top 'power' button and front round control button until it shuts down - goes blank and dead.  Then press the top power button to re-activate - reboot - it.
    If that does not work then plug into your itunes computer, navigate in iTunes to see your iPhone and hopefully you will be able to sync it or at least 'restore iPhone' from the 'summary' tab.
    If you can not get onto the iphone perhaps you will still be able to sync if in iTunes by going - 'file' - 'devices' - 'sync iphone' or failing that try transfer purchases' and ultimately 'restore from back-up'.
    I had technical problems with my old 3GS (suffered a failed wireless antenna) so I took it to an Apple Store and they issued me with a service-replacement/reconditioned phone for a very modest charge.  So if worst come to the worst get a new phone that way!

  • Forgot my passcode and the computer i backed it up on doesn't work, what can i do.

    forgot my passcode and the computer i backed it up on doesn't work, what can i do.

    Erasing the device is supposed to erase the passcode which is supposed to allow you to activate the device again. Let it go for the 10 minutes and then see if you can activate it again. You can also try erasing the device again and see what happens.
    Go to icloud.com/#find.
    If prompted, sign in with your iCloud Apple ID.
    Click All Devices at the top of your browser window.
    Select the device you want to erase.
    Click "Erase [device]" to erase your device and its passcode.
    Use the Setup Assistant on your device to restore the most recent backup.
    This is what Apple recommends, so you have to trust that it is going to work .....

  • I updated iphone 4 to ios 7.1 and the camera doesn't work. what can I do?

    i updated iphone 4 to ios 7.1 and the camera doesn't work. what can I do?

    First, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.
    If this does not help, and to rule out a software issue, set it up as new device without using the latest backup, in case that backup contains corrupt data.
    Is the camera working after that, restore from the backup. Is the camera still not working, this might be a hardware failure and you'll have to get the phone serviced by Apple:
    How to back up your data and set up as a new device
    iPhone - Contact Support - Apple Support

Maybe you are looking for

  • Orange uk wifi app

    can not find this app for blackberry anywere please help .

  • Displaying the total no of records in ALV ouput.

    Hi everybody, I am displaying the output in ALV. I want display the total number of records at the top of page.( before the columns). Can any one throw light on this plz. Karunakar reddy

  • Smart View 9.3.1 error to connecting Hyperion Planning using Excel

    Hello Folks, When I try to connect the Hyperion Planning 9.3.1 using Smart View 9.3.1 I had the following error "Client authorization is needed to accpet the certificate". I am using the URL connection with the following address http://server_name:83

  • I have two queries do do with Mail  running 10.9

    1     ICloud seems to have lost a great many of my sent messages.  I have a few recent ones and then some from 2012 and a few others going back to 2010. I rely on the iCloud sent mesages to know what I have said to people.  Are they lost forwever or

  • Save data to array

    帖子被trinight在02-19-2006 07:14 AM时编辑过了 Attachments: save data to array.vi ‏11 KB