I cannot Turn of Normalizing of the entire project when sharing to iTunes. . . Help
I have an amazing project, it sounds beautiful and yes, the bass is supposed to blow any speakers that are lame as ****. The song is so magic and Logic keeps cutting the volume on it when I share to iTunes and unlike garageband, I cannot seem to figure out how to stop this monstrosity. Anyone help out? Thank you in advanced.
Ahhh you opened you eyes and read the Bounce dialog?
Another thing you might want to check.
All of the Audio enhancement in iTunes shoud be Off, All of them.
Similar Messages
-
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
hello i have a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.
http://support.apple.com/kb/HT1808
-
My ipad 2 just froze. I cannot turn it off. The circular rotating icon is in the center of a black screen?
Try this; Keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo on your iPad screen.
-
The entire family has used one itunes account for years. How do we all set up separate iCloud accounts now? Or should we? 5 macbooks, 2 ipads, 4 iphones, 2 itouch, 2 imacs. How does one decide what to sync, share and what not to? Green Jeans.
You need to start by understanding the distinction between iTunes and iCloud - Apple confuse the issue by referring to 'iTunes Match' as part of iCloud. It isn't.
You don't have to have the same login (Apple ID) for iTunes and iCloud; many people don't and there's no problem about it.
Your iCloud ID gets you email, calendars, contacts, iWork documents and PhotoStream syncing between devices.
Your iTunes ID gets you the iTunes Store, the App Store for iOS, the Mac App Store for OSX,, 'iTunes in the Cloud' (downloading of purchased items to any logged-in device) and 'iTunes Match' (uploading of songs not purchased in the iTunes Store).
Your family members can easily each get their own iCloud account to keep email etc. separate - in each case they will need a different non-Apple email address (a free one from Yahoo etc. would do) to set up the ID. If they are sharing a Mac they need to be using a separate user account.
They can have their own iCloud accounts and still all sign into the same iTunes account: or they can open their own iTunes accounts using their new iCloud Apple IDs.
BUT they cannot transfer items purchased under the present iTunes ID to different iTunes IDs. -
I am getting quicktime error 50 message when I try to share a project to youtube. I use retime frequently, mixing and matching rates with no issues. I am having trouble with this project. The entire project is retimed ( which I have done before), it is four minutes and change in length. I used different rates, holds as well, and
secondary storylines ( retimed to match the primary clip rate ). Any suggestions would be helpfull, thank you.I figured it out:
FCPX does not support NTFS drives, even with Paragon NTFS working perfectly for everything else on the system.
I guess Apple (just) assumes that nobody will, or should, be using any other filesystem than Mac with FCPX.
I wasted hours looking for a solution, when a better error message besides a misleading "cannot allocate memory" could have been something more useful.
Not impressed. -
Hi my airport router ( ateast i think this is where the problem originates) has been turning off intermittenly for the past week, when it does this NO devices recieve internet connection, mac, pc,iphone, ipad, wireless or hardwired directly to the router. However they all show to be connected with their corresponding bars and the ip's are all fine. Earlier today it started flucuating on and off about every 5 min making work impossible and now it seems to be completely broken (im currently on my iphone connected though its own internet) Does anyone know how or ehy this happened and how i can fix this? And to know if this originates from the router or something else entirely. Thank you!
Hi - some clarifications would help narrow down some symptoms - just what has been turning off? - has the light been solid green but the modem isn't providing wi-fi? - or is the light flashing yellow with no internet? - which can mean several things - does the light go out completey? - so if you can report on exactly what is happenening and when, maybe someone can help you - we also need to know if there any error messages along the way - we also need the types of devices involved and how they are attached - kind of like a nework map - the more info that you provide, the more answers you will get.
Regards,
Charlie - -
Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon
Perhaps this discussion will help with your issue,
https://discussions.apple.com/message/16502324#16502324 -
I have several users in an exchange environment who cannot email a photo from the iPhone. When the click on Email Photo, they are prompted to configure a mail account even though there is already an exchange account in place. How do I remediate this? Not all of the users in our environment have this issue. If the users having this issue, install a secondary email account, Gmail, Hotmail, etc, then they can send through those accounts. Why would the exchange account not be seen to send photos?
Sounds like it worked until the policies associated with the account that are creating the problem were fully pushed down.
Try setting up a new (test) Exhange account and see if it behaves the same way on the phone (after removing the problem account from the phone, of course). -
How do I select the entire text when the focus is moved to one TextBox?
How do I select the entire text when the focus is moved to one TextBox?
There are three TextBoxes. I use <TextBox TabIndex="1"/> to set the order they are selected. When I enter one specific TextBox, I would like to have the entire text selected ... one key stroke removes all of the text in that TextBox.
bhs67I do it the following way:
1. Override the OnStartup for the application. Use the following code: (VB.NET)
EventManager.RegisterClassHandler(GetType(TextBox), TextBox.GotFocusEvent, New RoutedEventHandler(AddressOf TextBox_GotFocus))
2. In the event handler use this code (again VB.NET)
Private Sub TextBox_GotFocus(ByVal sender As Object, ByVal e As RoutedEventArgs)
_theTextBox = CType(sender, TextBox)
If setFocusTimer IsNot Nothing Then
RemoveHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
End If
setFocusTimer = New DispatcherTimer
setFocusTimer.Interval = TimeSpan.FromMilliseconds(10)
AddHandler setFocusTimer.Tick, AddressOf setFocusTimer_Tick
setFocusTimer.Start()
End Sub
Private Sub setFocusTimer_Tick(ByVal sender As Object, ByVal e As System.EventArgs)
setFocusTimer.Stop()
_theTextBox.SelectAll()
End Sub
What this does is register a handler for every textbox in your application. This will execute when the GotFocus event is raised and will allow you to do whatever (in this case select all) you want. A great way of handling things at the application
level.
Lloyd Sheen -
Hi, this morning I installed last upgrade of CC (05/28/2014) but it did a mess on the entire pc: when I launched Photoshop it appeared a driver error on my graphic hardware (I checked, everything was up to date nd correctly working) and Photoshop didn't respond; internet stopped to work too.
The only way was to uninstall The CC App and create a restore point after uninstalling (It wasn't possible restore a previous one BEFORE the upgrade of this morning....)
My Processor is Intel(R) Core(TM) i7-4500U CPU @ GHz 2.40 GHz
RAM is 8GB
What do I have to do?
Reinstall it without upgrading it?
I would really appreciate that upgrades would be tested before being released.... -_-Moving this discussion to the Photoshop General Discussion forum.
-
How can I delete part of my message or forward part of it? I only see an option that allows me to delete the entire message.... Help please
hold your finger on the part of the message you want to delete. This will give you the copy and more option. Choose more, and then you will be able to choose the message or messages you want to delete. Once selected you will be able to tap the trash can icon on the bottom of your screen.
-
running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanksSo, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a -
How to make the entire project in the project server 2013 reschedule؟
How to make the entire project in the project server 2013 reschedule ?
Because item %compelet related to reschedule
In this photo it is known there are no items update projectHi,
In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
assignments with the actual work (if not comming from timesheets) and remaining work.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
Should I bounce a mix, or bounce the entire project ?
Hello yet again,
I'm about to create a CD containing 12 tracks with spoken narrative + music created in Logic Studio, as a teaching aid. This will be offered for sale.
I'm not at all sure how to get these tracks from the state of being a list in WB, to the finished product ! Should I bounce a mix, or bounce the entire project, or simply click on Burn and not ask any questions ???
Thanks,
SeaDreramProbably not, Apple controls those prices, it's a $100 difference every device you go up 4 is free, 4S $100, 5 $200. I say just go with the 5, might as well get the most up to date device.
Then of course the 5s will be announced ;D
Maybe you are looking for
-
Acct assignment required for GRIR clearing
Hi, User was performing GRIR clearing and has the following error : "...require G/L 600008 to match to an assignment..." When checked under OKB9, the company code has 2 plants assigned to 2 different cost centers for this GL acct / cost element. Plea
-
Error in Binding panelSplitter component to a bean..
hi, When i binding the panelSplitter component to a bean, get one error means not Found...( import oracle.adf.view.rich.component.rich.layout.RichPanel) i didn't understand pls give more detail in how to binding panelSplitter Component????? By NZL Ed
-
Different resolutions for different monitors?
I just hooked up my new Dell 30" monitor. To get its full resolution, I have to have the lid closed on MBP. This means I can't use my iSight camera of course. Is there any way to have the lid open and still get the maximum resolution on my external m
-
Read Table ITAB with key Dynamic Value index 1
Here is sample Intenral table Columnname-C01 / C02 / C03 Value-123 / 456 /789 I would like to search value of the internal table according to dynamic value given by the code. i.e. read table ITAB with key <Dynamic Value> index 1.
-
i have just purchased my new ipad and I want to transfer my iPod library of music and videos to the iPad,how do I do this easily,seems to be a basic neccessity