I cant access my application control in user management cosole( shared svcs

Hi all.. A bit confused....... I just migrated users and groups to Shared Services.......from essbase adminstration server and essbase server.....While migrating to shared services I created a password ( lets assume 'yyyyy') for Essbase Administration Server and Essbase Server.. Well I dont have much more users... the only user for EAS server is default one which is username/password ='admin/password'. For Essbase Server username/password=xxxxxx/xxxxxxx. But after migrating users and groups to shared services mode when I tried to login with these passwords Iam unable to login....... Then I tried to login with my old username/password..... it was successfull..
The problem is when Iam trying to assign access control to application in "user management cosole"....... it is showing the error" login failed due to invalid login credentials". And also I cant access Business Rules it is throwing the error"Refer to security guide to configure security permission for this application"...........?
Any Idea....... What should do ?
Thanks and Regards,
Sri-Oracle.
Edited by: Sri-Oracle on May 6, 2009 11:16 AM

Hi John......Thanks for your reply....
I did as you said but still no hope... I think Iam making a mistake at some point.... But I dont know what is it.
The Sequence what I did was
1.Started the Essbase Server (with old username/password....as it shows only one user name while it starts).
2.Started the Essbase Administrative Server.
3.Start the EAS console...... with the old username/password=admin/password.
4.In the enterprise view I right click on the Administrative server>Externalise users> But it says "There are no users available for migration". So it seems my EAS server security has been converted to Shared Services security mode..So where can i use my new password when I created while migrating to shared services? and what is the username is it admin or some other?
5.In the enterprise view I right clicked on the essbase server. I removed the current Essbase Server. Then I tried to add Essbase Server.. Here I can see the checkbox for "Use External Authentication". So it means my essbase server has been externalised.. Well Here is the problem..When the check box is enabled it shows only username that is admin.....and password field is not highlighted.. When I click these it says" Login fails due to invalid credentials"....But I can log in (Add Esbase Server) with uncheck the "use external authentication" check box and entered the details of my old username and NEW PASSWORD which is created while migrating ESSBASE SERVER to Shared Services... then it works..........
After these prolonged process also I cant go with access control option for applications in User Managemnet Console...........
Thanks and Regards,
Sri-Oracle

Similar Messages

Im logged into my account but i cant access my applications when i click them im recommended a thirty day trial

Im logged into my account but i cant access my applications when i click them im recommended a thirty day trial for the applications that i already pay for i bought the full suite in november for the 2014-2015 school year i NEED access to my applications

Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
or
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Server Hangs when I tried to Access web Application that deployed in Managed Server

          Hai All!
          Here is my problem ! I started Admin Server and Managed server in a same machine.
          I deployed HttpClusterServlet in web.xml of Managed server. When i started servers
          they start fine and says Clustering started.... But when i tried to Access index.jsp
          that is in Managed Server default web application ..Nothing happens. It neither
          throws exception nor shows the desired page.. Seems to be Browser hang and server
          hang. At this stage i am unable to access Admin console also.(I can access before
          i tried index.jsp of managed server).. It seems to be Hang Allover..
          Pls suggest me how to come out of this hanging...
          Rgds
          Manohar


See my answer to your last post. The short answer is that the HttpClusterServlet is
          likely to be the problem and not the cluster. You can try one of the web server plugins
          or a hardware load balancer as a temporary workaround. You should file a case with
          support too...
          Manu Kar wrote:
          > Hai All!
          >
          > Here is my problem ! I started Admin Server and Managed server in a same machine.
          > I deployed HttpClusterServlet in web.xml of Managed server. When i started servers
          > they start fine and says Clustering started.... But when i tried to Access index.jsp
          > that is in Managed Server default web application ..Nothing happens. It neither
          > throws exception nor shows the desired page.. Seems to be Browser hang and server
          > hang. At this stage i am unable to access Admin console also.(I can access before
          > i tried index.jsp of managed server).. It seems to be Hang Allover..
          >
          > Pls suggest me how to come out of this hanging...
          >
          > Rgds
          > Manohar

Cant Access 10g Grid Control

Hi Everyone!
I just tried to start Enterprise Manager (Grid Control) on our 10g server (using the 'Application Server Control Console' icon from Windows), and Internet Explorer gives me a "page cannot be displayed" error, with "Cannot find server or DNS Error" as the reason.
From what I can see, the relevant services are running, but I'm not sure what else to check.
What can I check?
Many thanks.

Please post this question in
Enterprise Manager 10g Grid Control
Enterprise Manager
Is it a DHCP?
Adith

Access MySite Document Library of User Who has shared a document.

Hi Team,
I am just confused as we are facing the issue from past two days, We have SharePoint 2013 on premise and are using Mysite Application. Suppose there are two users A and B.
If A share a document from his personal document folder to B. B recieves email notification that a document is shared and he can edit or view documents depending on the permission.
But if B visit the A Mysite and try to access his document library he gets access denied. As per OOTB behavior B should see Shared with everyone folder and the document which has been shared with him.
Please help me to resolve the above issue.

Hi，
I have done a test in my SharePoint on premise. B can see shared with everyone folder of A and documents which is been shared with B from my site.
For resolving your issue, you need to check whether the feature ‘Limited-access user permission lockdown mode’ is active. if it is activated, you need to deactivate it.
Open your site with an administrator account->Click Site Settings->Click Site Collection features under Site Collection Administration->Scroll to Limited-access user permission lockdown mode, check whether it is active. If yes, please deactivate
it.
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

GTX590 Cant access NVIDIA control panel Black screen after 10 mins

Hi,
I recently purchased an MSI GTX590 and encountered this problem " Cant access NVIDIA control panel Black screen after 10 mins". I am running Windows7 Ultimate SP1.
I did have an xfire setup of 2xHD6970's, I uninstalled all the old drivers then used driver sweeper to clean out any remaining folders, also uninstalling them from device manager.
Next I installed the latest version of drivers from the NVIDIA site only to find that I am stuck in safe mode resolutions for my screen I cant access the NVIDIA control panel as it is saying " You are not currently using a display attached to an Nvidia GPU ". In device manager it states that
"Windows has stopped this device because it has reported problems. (Code 43) ".
I have now uninstalled and reinstalled about 6 different versions of drivers from NVIDIA including the latest BETA drivers which all have the same issue??????
I have also gone to the MSI site and downloaded their latest recommended drivers for the GTX590 NVIDIA Graphics Drivers Version 267.91 which are the only ones that seem to work as in it fixes the screen to the proper resolution and lets me into the NVIDIA control panel yet after about 10-15 mins the screen will go black or the computer will just freeze. Rebooting causes the same issue after 10-15mins
I have noticed a few others out there experiencing the same problem but no fixes as of yet any ideas??

Thankyou for the reply,
Tested the card in another working machine capable of running and its fine I am sure the PSU I have is more than capable of running this card I ran 2 6970's in xfire on the same PSU and motherboard with no problems.
I am running it on an 40"BRAVIA LCD and am using the DVI to HDMI converter that came with the GTX590 and I have also tried it with an DVI to HDMI cable also.
The system is stable under the latest NVIDIA drivers but the display drivers aren't recognized under device manager and the screen resolution is still stuck in the safe mode size, they are shown up as having the same "error 43" and I still can't get access to the NVIDIA control panel.
I strongly believe this is a driver issue or an issue relating to software within windows. To give you a rundown on several things that I have tried to isolate or fix the issue with is in a list here:
1. Installed every different version of drivers on an fresh install of windows7 including the latest Beta drivers
2. Tried to run the GTX590 on another machine and it runs using windows7
3. Run different graphics card setup using the same PSU RAM and mb on windows7 no problems.
4. Run the gfx card on only 1 gpu no change.
5. Last step I will take is to install Windows7 without the SP1 as I have read elsewhere that similar problems have been fixed by doing this if that don't work might just sell my soul to the devil n see if he can fix it lol.

How to browse ADF Application page by user

Hi, i am ali & just i want to know, how to access ADF Application page by user through browser
Edited by: user13367653 on Jan 17, 2012 5:20 AM

Ali,
Welcome to the forum. Please take a bit of time and tell us which jdev version you are using.
It's helpful to read https://forums.oracle.com/forums/ann.jspa?annID=56 before posting.
You question is not clear, so we can't relay answer it. Where would you like to access the adf application? On the integrated server or a stand alone server?
Timo

Cant access tty

I'm using a live a CD of arch-core-2010.05-x86_64 and Ive used a usb to do the installation process but i failed to setup grub correctly so i had to reinstall
when using the usb i get the error: missing operating system
but anyways im not gonna do the usb installation im just gonna do the live CD
when doing live CD install i get these errors
boot device dint show up after 30 seconds
falling back to interactive prompt you can fix the problem manually
/bin/sh: cant access tty: job control turned off
my hard drive is clean there are no operating systems installed
i have search on Google and all the problems i could find with the same error msgs are mostly coming from usb installs
does anyone have any info on the subject if so it would be greatly appreciated
thanks

Did you plug in the USB and tried to install there or trying to install in your hard disk? Please look into the wiki for USBstick installation.

Why can't access my application from different IP region.

I use the default configuration in the installation process.
software package is as_windows_x86_101300_disk1.zip
All the servers have IP address like 10.37.71.***
after i deploy my application server, local machine can access my application and other servers can access it.
But the users with ip 10.37.88.*** can't access my application and internet users can't access it too. They only can access the default home page of ias, and can't access em too.
I don't know what the problem is.
Another problem is that, if i change the defaultWebApp from "default" to "myApp", the service can't be started. I want to know how to set myapp as the default application.

I installed the oracle application server 10g using default configuration. and didn't modify any configuration file.
The installation package is downloaded from oracle web-site without license. has it any difference from the package delivered by oracle.

Automagic User Provisioning Essbase + Shared Services

Hello All,
I have recently been able to figure out how to use the Shared Services API for 11.1.2 in a previous post:
Shared Service API Working 11.1.2
However, all of the user management and provisioning examples work with native users. Has anyone used this API with active directory or LDAP users? Is there some other way (export/import utility)?
My problem is that I need to be able to script the user management with shared services and have not been able to find much help. In the past, we ran Essbase in standalone mode and were able to handle this via MaxL generating essbase native user accounts. This will no longer work since we want to use shared services when upgrading to Essbase 11.

After your comments I looked a bit more closely at the DDL for create user. It looks like i need "type external";
MAXL> create user 'someuser' type external;
OK/INFO - 1056060 - User [jdp5209] created.
This is what i want!
MAXL> create user 'someuser' identified by 'somepass';
OK/INFO - 1056060 - User [someuser] created.
This is not what i want, creates Shared Services native user.
It seems obvious now, but before, shared services (CSS module to essbase) was "external" so the old external is the new native.
Sorry, new to shared services! This works. Thanks all

Multi user application control data access

Dear all,
i am using Oracle Developer Suite 10g and database 10g, windows xp plate form.
i want to develop multi user application regarding education.
i have two questions.
1. i take a start from creating an HR database which have 30 tables.
this database has 10 users.
the users will log on from their own schema.
how they will access the HR schema?
should i create a public synonym for each table in the HR Schema?
or should i create a view for each table in each user schema?
or should i grant select,insert,update etc to each user on HR schema?
2. i want to control the data access for each user.
i.e. every student could access his own academic record. each teacher access his own related record, the manager the owner and so on.
how to accompolish this task? oracle roles are not sufficient for this purpose.
Your help is highly appriciated.

How about you start with the basic stuff, like the 2 days developers guide:
http://www.oracle.com/pls/db112/to_toc?pathname=appdev.112/e10766/toc.htm
and make it to the advanced developers guide:
http://docs.oracle.com/cd/E11882_01/appdev.112/e25518/toc.htm
and work your way through the concepts manual:
http://www.oracle.com/pls/db112/to_toc?pathname=server.112/e25789/toc.htm
and everything else which sounds interesting to you in here:
http://www.oracle.com/pls/db112/portal.portal_db?selected=5&frame=
As for your first question this should be covered here:
http://docs.oracle.com/cd/E11882_01/network.112/e16543/authorization.htm#BABHFJFJ
i want to control the data access for each user.This is also documented:
http://docs.oracle.com/cd/E11882_01/network.112/e16543/vpd.htm#CIHBAJGI
cheers

I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

i cant access to itunes store
here is dignostic report
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Hewlett-Packard Compaq Presario CQ61 Notebook PC
iTunes 10.6.0.40
QuickTime not available
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0025AE8C032360A0
Current user is not an administrator.
The current local date and time is 2012-03-27 13:06:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
Description:          speedinfo
IP Address:          182.237.181.108
Subnet Mask:          255.255.255.255
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          202.177.240.125
                    202.177.240.251
Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
Description:          Atheros AR5007 802.11b/g WiFi Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:          192.168.0.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          192.168.0.2
                    192.168.0.4
Active Connection:          speedinfo
Connected:          Yes
Online:                    Yes
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

Accessing web application from users' PC

Hi there,
My server is up and running, appsets are working nicely and everything works perfectly. But I have an issue when accessing the web application from a user PC on the same domain, and I'm not sure if it's down to me or not.
From the users' PC, with BPC for Excel open, I click on the link for BPC Web, and Internet Explorer opens and attempts to take me to the web app. But if the address contains the server name, it doesn't work. If I manually type the IP address in instead it works.
Why is this? Have I forgotten to do something, or is it a DNS problem, or other local IT issue?
I'm sure I've missed something really silly, but can't figure out what!
Any ideas appreciated!
Thanks a lot,
Jason

Hi Akim,
I think this is actually part of a wider problem - I have been testing this on my local PC (over the clients' VPN) and now it works fine. But I just logged onto the clients PC using Webex and I can't get into ANYTHING! Not the Admin client, not BPC for Office, not the web application - nothing.
I think I need to go there on monday and actually go through this with one of their network guys - I'm not convinced that it's a problem with the server anymore!
Thanks for your help - I will keep you posted!
Jason

Urgent Help needed - Users not able to access webdynpro application in VPN

Dear Team,
I've deployed WD application in Portal. users who are in intranet are able to access but users who are accessing through VP, internet and ODC's are getting 404 error not found issue.
Please help me.
Best Regards,
Prasad P.M.V

Issue is with reverse proxy i was able to resolve

Some users hitting error page when trying to access Web Applications...why?

Hi,
I have a SharePoint 2010 setup with 4 WFE, 4 APP Servers and 1 DB Server.
After reading up a while back which services should be running on which server layer I remove the Web Application Service from APP Server (using Central Admin). The service is currently in error state on that machine. I had also removed a WFE Server which
was not required and ensured all WFE had Web Application Service running as Microsoft Specified. I have checked each WFE and they have all same Web Applications in IIS. I have accessed a specific Web Application (that a user said they couldn't access) on 2
of the 3 WFE servers when remoted into them, but one prompts me for login details. I have looked at the NLB on each WFE Server and saw that 2 out of three servers had all three servers in cluster. One that didn't was not same server as had problems accessing
Web Application. I have removed a Server from Cluster and added it back as I saw Priorities were 1,2,4 (3 must have been initial removed server) and added it back again so Priorities were 1,2,3.
Can anyone explain what may have happened in this scenario? It seems I think to be hitting this server with the problem accessing the Web Application. It seems to time out. How do I resolve this? DO I need to resync?
Thanks.
John.

Hi John,
For your issue, it can be caused by that you remove and re-add a WFE from the NLB cluster. As the Priority was changed, you need to disconnect and reconnect your SharePoint using SharePoint Products Configuration Wizard.
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

I cant access my application control in user management cosole( shared svcs

Similar Messages

Maybe you are looking for