My airport express no longer shows up in Airport Utility since I got a new router.

Hi all, I'm scratching my head at this one.
For years I've had an Airport Express and it has worked fine. I was using it simply to stream music from iTunes on my PC as well as my iPhone and iPad to my home theater which is in a different room. I had a Linksys WRT150N wireless router, and the Airport Express would join my existing network and stream music via Airplay.
A few days ago I replaced my Linksys router with a Netgear WNDR3800, and the Airport Express no longer connected. I assumed I had to set it up again, but it is not even recognized by Airport Utility, so I can't get to the setup screen. I tried performing a soft reset, hard reset, and attaching the Airport Express to one of my Netgear's LAN ports via Ethernet cable, but it still won't show up in Airport Utility. The amber light just flashes on the unit and I can't access any setup screens.
Am I missing something obvious? All of the help tips assume the Airport Express at least shows up in Airport Utility. In my Airport Utility there is nothing to select and it says "AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
I am running a PC with Windows 7 and using Airport Utility v. 5.6.1 for Windows.
Thanks for any help!
-Rob

Did you try temporarily connecting an Ethernet cable from your PC to the AirPort Express to see if AirPort Utillty could "see" the AirPort Express that way? This method will work virtually all of the time unless the Windows Firewall or the PC's anti-virus program is blocking the connection attempt from your PC to the AirPort Express.
If you want to configure the Express using wireless only, you need to remember that when you reset the Expess back to default settings, it is now producing a wireless network with a name like Apple Network xxxxxx.
You must log on to the Apple Network xxxxxx wireless network first....no password is required.....and then open AirPort Utility so that your PC will establish a connection to the AirPort Express.
Once the AirPort Express has been configured to join your Netgear wireless network, you can log back on to your normal wireless network and all devices will be working with one another.

Similar Messages

Trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

trying to reconnect airport express to time machine but express not showing up in base station. unfortunately clicked forgot in airport utility and express no longer shows up. how to reconnect?

I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

Two airport express no longer show w time capsule in utility

did the latest update interfere with our two airport express. i did the Mac update install and neither of the airport express show in the configuration. we also had a power outage yesterday for about 5 hours. not sure which is the culprit but after doing the install and rebooting the entire system we still have no airport express devices showing anymore under the time capsule and their lights are solid yellow.

Factory reset them.. they have stopped boot.. (solid yellow) .. it must flash yellow or when setup correctly go to green.
And yes, Yosemite has the worst airport utility and network on any new OS ever released.. ever.. I mean Vista badness.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that.

Bought 4th Gen 3TB TC - streaming TV over the internet is now so slow and now is constantly buffering. It seems the Airport Utility is always 'searching for new networks' - don't know if this is the problem. It's not the internet speed as checked that. I took my old router upstairs and was streaming TV via my ipad seamlessly - the same program via the TC was constantly buffering.
I just expected to be able to plug in the TC, so a simple set-up and experience wireless both upstairs and downstairs in my house. For some reason the range is low and speed veru disappointing.
I am far from being an IT expert but I would welcome advice about setting up this TC so we can enjoy the product as it was designed. Please HELP!

No silver bullet........but my suggestions may drive you in the right direction.
1. Unplug the power cable from the TC and wait 10-15 minutes before powering back up.   Seriously wait!
      Proceed to #2 if this dosen't help.
2. Unplug the power cable from the TC, ubplug the power cable from your Broadband Modem (assuming it's a cable modem), disconnect ethernet, and cable from modem.
2a. Wait 10-15 minutes then re-connect cable, ethernet, and power back to modem (your modem should power up unless you have a power switch) wait for all the modem lights to come on EXCEPT activity.
2b. Connect ethernet from modem to TC, and plug in the power cable to TC.
      Proceed to #3 if this dosen't help.
3. Reconfigure the TC.........Read here........http://support.apple.com/kb/HT3728
All really simple to do....if you need additional help let me (us) know.

Airport Express no longer shows in Airport Utility

I have had a lot of problems lately with my TimeCapsule and Airport Express. Neither have been showing in the Airport Utility. I had to do a hard reset and was eventually able to continue my backups, even though after the reconfig the TimeCapsule doesn't show again. I picked up the airport express to do streaming of audio and it worked great for about 6 weeks. I have done a factory reset on the device and it showed up for about an hour. I am looking at the AE and the light is green, but it doesn't show in the Airport utility and cannot get the speakers to show in my itunes.
Help!

Ended up being a problem between my two routers conflicting with each other. Set up two different networks in the house and now all is happy.

Airport Utility won't recognize my new Airport Express

I see similar ports but don't understand the solution. Just bought an Airport Epxress to use for AirTunes from my MacAir notebook running Lion. Downloaded the right Airport Utility. After plugging in the AE, the amber light was solid then just flashed. The manual (pg 32) was no help. Airport Utility finally recognized the AE and I was able to configure it. The utility showed my my wireless network and asked me the WEP. I entered than and it said successful. Said window would stay open until AE restarted. Never did. I finally powered it off and on a couple of times. Airport Utility cannot find it now. Just continues to flash the amber on and off. The manual is kind of useless since it says to select the base station from the Airport Utility menu. I don't have anything to select.

How are you connected? Meaning, how is the Mac
running the AirPort Utility attached to the new
AEBS(n) and the AX's? Your problem is likely that the
AX's are already named and configured to operate in
the old network, but your connection method doesn't
provide visibility to them...
Thank you for posting back to me. I finally got them to work and your explanation I thinks explains to me what happened. (I got them up and running just before I saw your reply.) I unplugged both of them and connected them via an ethernet cable to the new aebs and also did a hard restart for both. They then showed up with their alphanumeric titles, not the titles I had given them. Airport Utility recognized them after that. Hopefully my experience and your explanation will help others too. Thanks again.

Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?

I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

My MacBook Pro's airport Utility will not recognize my new time capsule.

My name is Sam. I am not very computer savvy, but I am trying everything I can to get this time capsule to work. I have a MacBook Pro that has been getting the internet via a DSL connection. I am using a Versa Express VER170P dsl modem. I do NOT get wireless internet with this router. I bought the time capsule based on advice that I would be able to use it to get internet wirelessly in my condo. I have plugged the printer into the usb port, I have plugged my internet cord into the WAN slot and plugged the power cord into the wall. The TC shows the green light, but my Airport utility just scans indefinitely never finding it. Can anyone help? If so, please use basic terms. =)
Thanks,
Sam

Hi and welcome to the discussions.
The green light is a good sign so far.
Try connecting an ethernet cable from one of the LAN ports (there are 3 of them)on your Time Capsule directly to your MacBook Pro and then see if this helps AirPort Utility locate your Time Capsule to you can configure it.
If no luck, try shutting down your system and restarting. Modem first for a few minutes, then Time Capsule until you have the green light, then your computer.
Once you have the Time Capsule configured, and you are ready to make your first backup, keep the ethernet connection to Time Capsule as there is a lot of data to be copied and it will go faster and more reliably with this connection. Subsequent backups will normally be much smaller and quicker, so you could use wireless for these if your prefer.

Calendar no longer sends data to iphone since I got a new PC with Outlook 2010

My iphone 4 used to happily sync with my old PC (Windows XP) but I've got a new PC with Outlook 2010 and the calendar no longer sends data from the PC to the iphone.
I've used the Help questions here and created a new event on my phone which has now created a new calendar on the PC, so I have 2 calendars now, one with all events in and one only with events which are also on my phone.
No new events added to my calendar are ending up on my phone.
How do I:
a: get rid of the new calendar which has opened (it is called "Outlook Data File", the existing one, which I want to keep, is called "Personal Folders)
b: get the calendar to send info to my phone and back?

My iphone 4 used to happily sync with my old PC (Windows XP) but I've got a new PC with Outlook 2010 and the calendar no longer sends data from the PC to the iphone.
I've used the Help questions here and created a new event on my phone which has now created a new calendar on the PC, so I have 2 calendars now, one with all events in and one only with events which are also on my phone.
No new events added to my calendar are ending up on my phone.
How do I:
a: get rid of the new calendar which has opened (it is called "Outlook Data File", the existing one, which I want to keep, is called "Personal Folders)
b: get the calendar to send info to my phone and back?

My playlists are no longer in my itunes since I got a new iphone

So I got a new iPhone 4...when I synced it and set it up etc, my iTunes was totally wiped. Now when I access the store it says I have no albums/playlists etc.
I have a horrible feeling it may be due to the fact I randomly set up a new apple id for the iCloud (I thought you had to) and I used a made up email, as it wouldnt let me use my current one. So I have not been able to verify the email (of course as it doesnt exist) and I think this might be why nothing is coming up. But even when I used my verified details my iTunes store says I have nothing. I have tried to delete the iCloud profile but it just keeps on coming back as the made up one, no matter how many times I delete it.
I no longer have the pc I originally set up the iTunes on (years ago)
Im just not sure what to do as the thought of losing all the playlists (and to be fair mine isnt huge) it painful.
Any ideas on how to help an idiot out?
I work through a pc not mac.
Thanks

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Every time I launch airport utility i says theres a new update to 5.6.1 so i click update and there is no update. Do i need to reset or restore my time machine? if so will I loose all my files?

the problem is that i launch the airport utility and it always says there is an update to 5.6.1, i click update and it launches the app store and tere are no updates available. i'm wondering if i need to reset or resetup my router but am afraisd if i do that i will loose all the files on my hard drive. I think this also may be related to why i am unable to use the remote app on my ipad or iphone for my apple tv (2nd gen) any input would be bvery helpful. i am now running mountain lion for my OSX

You must have upgraded to ML.. 5.6 airport utility is not actually ML compatible.. it will work but cannot be loaded as Apple ceased support at Lion. Hence why there are no upgrades.. you should not be using it at all. You are supposed to use toyland v6.1 included in ML.
I would certainly just ignore it.. having 5.6 is a great advantage .. it is a tool.. ML version is a toy.

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

Airport Utility telling me to use new version to set up Time Capsule

I just purchased a 2 TB Time Capsule. I started to set it up with Airport Utility 5.4.2, but AU tells me that I need to use a newer version of AU to set up this Time Capsule.
Any help?

Here is the message I get:
"This version of AirPort Utility doesn't support this Apple wireless device and might improperly configure the device if you continue to use it. Use the version of AirPort Utility that came on the CD with your Apple wireless device. Check www.apple.com/support/airport for the latest version of AirPort Utility"
Isn't 5.4.2 the newest version of AU?

Airport extreme unable to connect to new router

We just received a new router from our cable company. The old router worked with our airport extreme just fine. After hooking up the new router the airport extreme could not connect to it. I received the following error "error occurred while trying to access the apple wireless device. Make sure your connection is valid Error -6753" So then I tried to power off and reset the Airport extreme. The button was stuck on my reset button. I did figure that out and was able to click the button. But even if I would hear the audible click when i held down the reset button the amber light never flashed rapidly? Not sure what else to do. I have turned off the modem, unplugged the router, plugged them back in. etc. I just don't know where to go from here.
Thanks!
jodi

Were you able to get the AirPort Extreme to reset back to factory default settings, as LaPastenague detailed?
The amber light needs to flash rapidly for about 6-8 seconds during the process to indicate that the reset is taking place correctly. Once you release the reset button, the light will stay solid amber for 15-20 seconds or so, then change to slow blinking amber.
We are a bit confused as well, since in your first post you mention that you received a new router from the cable company, then later in the post, you mention that you have a (separate?) modem.
In the most recent post, you mention that you have a new modem. Is the new router from the cable company the same device as the new modem? Or, do you have a new modem and another new router in addition to the AirPort Extreme?
Can you clarify on exactly what devices that you have? Make and model numbers would help. We know that you have an AirPort A1408.

My airport express no longer shows up in Airport Utility since I got a new router.

Similar Messages

Maybe you are looking for