I cant import internal order from corrections form in OM responsability

Hi all,
Hope you are doing fine...i'm asking for help with an issue im facing these days....
I have an order which is stuck in the corrections form in OM responsability...i have tried to import it manually, but it has an error which is not letting me import it...
the error says:
Error: Unable to locate a valid Sales Tax rate for transaction.
Ensure that an active Sales Tax rate exists for the Location.
Does anyone have an idea of how to fix this issue....
Thanks and regards,

Hi,
Set the profile option Tax: Use Tax Vendor to Yes for the Order Management
Responsibility you're using.
Regards
/ Shakeel.

Similar Messages

Impute revenue to Internal Order from SD

Hi Experts,
Is it possible to impute revenues to Internal Order from SD? Is necessary some configuration?
Thanks in advance.
José Luis

If your cost of sales account is not setup as a cost element (which it shouldn't be if you are using cost based COPA), then you will need to created another cost of sale G/L account which does have a cost element and use that account for this transaction. The G/L account that is selected for cost of sales is based on the movement type selected in the sales transaction and the valuation class assigned to the material.
The easiest way of having the system find a different G/L account for this is to use a material in the sale transaction with a different valuation class that can be assigned to this new G/L account. You can use transaction code (FBKP) to assign the G/L account to the correct account modifier for that valuation class.
If you can't use a different valuation class (because this material is used in other situations as well), then the process is more complicated. You will need to have the sales transaction find a different movement type for this so that you can assign a different account modifier and G/L account. You will probably need to work with your S/D consultant to make this work, but I'll take you through some of the steps.
In the standard system, movement type 601 is usually used to issue the inventory against the delivery and record the cost of goods sold accounting posting. The trick here is to assign a different movement type to this speicific transaction. The movement type is assigned to the schedule item category that is assigned to the sales line. The schedule item category is derived from the item category, so you may need to have your S/D consultant create a new item category, a new schedule item category, and a new movement type for you. Now that you have a new movment type, you assign a account key and modifier to the movment type. From there assign the correct G/L account to the account key and modifier for your valuation class.
thanks,

Open Internal Orders from legacy system

Hi,
Is there a way to bring over open projects (Internal Orders) from legacy system into SAP?, especially the way to bring over legacy cost information collected on such projects.
Would appreciate any help,
Ram
Message was edited by:
Ram R

Hi
As such you cannot do this. You download your Legacy system data to an excel sheet and then upload the PO details into SAP using an LSMW etc.
Regards
Dev

Hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

hello, failing miserably here, cant import nef files from aperture 3.1.2 to iphone 4. I am syncing with the projects and smart albums and I am only able to sync the jogs and psd's Anyone out there to aid this frustrated photographer??

See my reply to a later simplified version of your question. I don't think that either iPhone or iPad recognize RAW files such as NEFs. And the iPhone is not designed to be a mass storage device like a portable flash or portabel hard drive for temporary storage of files, if that's what you're after. As I mentioned in my previous reply, I have an iPad and have been experimenting with it as a tool for photography, hoping that it would be a nice travel tool for backing up and viewing photos from my Nikon dslr. But both the iPad and iPhone just are not set up to do that well. Both show photos nicely, but organization of photos is very frustrating since you can't create albums on the iPhone or iPad, but only back on your sync computer. (There is one very powerful photo organization app called SortShots, but you import photos to it and it organizes and stores the images wtihin the app not using the native photo app. It doesn't work with NEFs either.) I don't know of any RAW processing software for either device.

Transferring internal orders from R/3 to CRM.

Hi,
Can any one tell me about the process of transferring the list of internal orders from R/3 system into CRM system????
Is there any specific T-code for this operation???
Please suggest.
Thanks & regards,
Rupam.

Hi Shivani,
I am not sure whether I understood your question or not. But if you want to use standard MW to exchange the data then you need to do the following.
I am assuming your R/3 and CRM are connected to each other ( check the same using tr. SM50 and test the connection from one system to other system)
1> check the queues R3A* & CSA* are registered in transaction SMQR
2> check the tr. SMQS for your destination system.
3> check for the site R/3 - OLTP and check for the subscription ALL BUSINESS TRANSACTION (MESG) Subscripition. - > this is for data transfer from CRM to R/3.
4> define the no. range for transactions and transaction types etc.
then you can load the object SALESDOCUMENT using the transaction R3AS - put some filter for this adaptor object so that it will bring only those transaction which you want to.
Reffer to the Best practice guide for further details. you can get this in site help.sap.com.
Hope this will help.
Thanks,
Vikash.

Cant import raw files from sony rx1003 into iPhoto

Cant import raw files from sony rx1003 into iPhoto. with rx1002 no problem! any suggestions?

Every model of a manufacture's camera have a different RAW format and, therefore, you'll have to wait until Apple receives the necessary information from Sony so they can create a RAW Compatibility Updater that includes that model.
In the meantime you can try the Adobe RAW converter with might support that camera model to create a dmg file that iPhoto will recognize and begging shooting the highest resolution jpegs until the updater is released.

Importing internal table from one program to another program

Hi everybody,
i have one small doubt.
i am using submit statement and passing the values from this program to another program selection screen. in that program logic is written.In that program one internal table values are being exported to the memory id of that program. now i have to import that internal table values into my program by using import statement. i am using the following syntax
import itab from menory id 'program name'.
but i am getting an error saying program name is unknown.
what is the exat syntax for this .
thanking you,
giri.

hi,
check these statements.
IMPORT - Get data
Variants:
1. IMPORT obj1 ... objn FROM DATA BUFFER f.
2. IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
2. IMPORT obj1 ... objn FROM MEMORY.
3. IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
4. IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
5. IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
6. IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
7. IMPORT obj1 ... objn FROM LOGFILE ID key.
8. IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
9. IMPORT (itab) FROM ... .
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For more details, see Storing Cluster Tables.
Variant 1
IMPORT obj1 ... objn FROM DATA BUFFER f.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters.
Effect
Imports the data objects obj1 ... objn from the data buffer declared. The data buffer must be of type XSTRING . The data objects obj1 ... objn can be fields, structures, complex structures, or tables. The system imports all the data that has been stored in the data buffer f using the EXPORT ... TO DATA BUFFER statement and is listed here. It also checks that the structure used in the IMPORT statement matches the one in the EXPORT statement.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. The contents of all the objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end
of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is
relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a
runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular
character cannot be converted when the character set is converted.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
Not all character-type fields are converted. To convert
a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters.
Moreover, you cannot use this addition in conjunction with the additions 3, 4, 5, 6, or 7.
Addition 9
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the
character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 2
IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See No implicit field names in cluster.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from the specified internal table itab. The first column in the internal table must be of the predefined type INT2 and the second must be type X. To define the first column you must refer to a data element in the ABAP Dictionary that has the predefined type INT2.
All data that was stored in the internal table itab using EXPORT ... TO INTERNAL TABLE and listed, is imported. The system checks that the EXPORT and IMPORT structures match.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the specified data cluster were imported, the rest remain unchanged (it is possible that no data object was imported).
SY-SUBRC = 4:
The data objects could not be imported.
The contents of all listed objects remain unchanged
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
Places the object in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to add new fields to the ends
of structures, even to substructures and internal tables (the additional fields are filled with initial value during the IMPORT). It also allows you to increase the size of existing fields (C, N, X, P, I1, and I2) and to map Char fields to STRING type fields or byte fields to XSTRING type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
field or omit the last component on the highest level (till Release 4.6 this was possible without specifying an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the page order is
relevant, that is any substructures match. With this addition, the system also ignores alignment changes arising from the Unicode conversion (for example, due to subsequent insertion of named includes).
This addition rules out any subsequent structural enhancements (addition 3) or structural shortening (addition 4) because with this addition it is the structural limits and include limits that are to be ignored.
As from Release 6.10, the include information will also be stored in the dataset, so that it is possible to also check whether the includes match, that is substructures and includes (named or unnamed) are treated the same. When importing data that was exported in a Release lower than 6.10, the includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition has the effect that an error in the
character set conversion does not cause a runtime error. The system uses "#" as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The system uses the specified replacement character if a
character cannot be converted during a character set conversion. If this addition is not specified, the system uses "#" as a replacement character.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
No character type fields are converted. For this you
must create a field or structure that is identical to the exported field or exported structure, except that all character type fields must be replaced with hexadecimal fields.
This addition, which is only allowed in programs with a set Unicode flag, allows you to import binary data disguised as single byte characters. This addition cannot be used in conjunction with additions 3, 4, 5, 6, and 7.
Addition 9
... CODE PAGE INTO f1
Effect
The codepage of the exported data is stored in the
character-type field f1 (for example, to be able to analyze the data imported with the addition IN CHAR-TO-HEX MODE).
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 (for example, to be able analyze the data imported using the addition IN CHAR-TO-HEX MODE). The field f2 must be of type ABAP_ENDIAN, defined in type group ABAP. You must therefore include the type group ABAP in the ABAP program with a TYPE-POOLS statement.
Variant 3
IMPORT obj1 ... objn FROM MEMORY.
Extras:
1. ... = f (for each object to be imported) 2. ... TO f (for each object to be imported)
3. ... ID key
4. ... ACCEPTING PADDING
5. ... ACCEPTING TRUNCATION
6. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See You Must Enter Identification and Cannot Use Implicit Field Names inClusters
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures or tables) from a data cluster in the ABAP memory (see EXPORT). Reads in all data without an ID that was exported to memory with "EXPORT ... TO MEMORY.". In contrast to the variant IMPORT FROM DATABASE, it does not check that the structure matches in EXPORT and IMPORT.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because the ABAP memory was empty.
The contents of all objects remain unchanged.
Note
You should always use the addition 3 (... ID key) with the statement. Otherwise, the effect of the variant is not certain (EXPORT statements in different parts of a program overwrite each other in the ABAP memory), since it exists only for reasons of compatibility with R/2.
Additional methods for selecting and deleting data clusters in the ABAP memory are provided by the system class CL_ABAP_EXPIMP_MEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... ID key
Effect
Imports only data stored in ABAP memory under the ID key.
Notes
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Addition 4
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 5
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR field, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 6
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO MEMORY, DELETE FROM MEMORY, FREE MEMORY
Variant 4
IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (after itab(ar) or ID key )
5. ... ACCEPTING PADDING
6. ... ACCEPTING TRUNCATION
7. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters and You Cannot Use Table Work Areas.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from shared memory. The data objects are read using the ID key from the area ar in the table itab - c.f. EXPORT TO SHARED MEMORY). You must use itab to specify a database table although the system reads from a memory table with the appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. You may have used the wrong ID. The contents of all the objects remain unchanged.
Notes
The table dbtab named according to SHARED MEMORY must be declared using TABLES (except in addition 2).
The structure of fields (field symbols and internal tables) to be imported must match the structure of the objects exported in the dataset. The objects must be imported under the same names as those under which they were exported. Otherwise, they will not be imported.
The key length consists of: the client (3 digits, but only if tab is client-specific); area (2 characters); ID; and line number (4 bytes). It must not exceed 64 bytes - that is, the ID must not be longer than 55 characters, if the table is client- specific.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the shared memory are provided by the system class CL_ABAP_EXPIMP_SHMEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... CLIENT g (before ID key)
Effect
The data is imported from client g (provided the import/export table is tab client-specific). The client, g must be a character-type data object (but not a string).
Addition 4
... TO wa (after itab(ar) or ID key)
Effect
You need to use this addition if user data fields have been stored in the application buffer and are to be read from there. The work area wa is used instead of the table work area. The target area must correspond to the structure of the called table tab.
Addition 5
... ACCEPTING PADDING
Effect
This addition allows you to: append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 6
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 7
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 4 (enlarge structure) or addition 5 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO SHARED MEMORY, DELETE FROM SHARED MEMORY
Variant 5
IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (last addition or after itab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See Cannot Use Implicit Fieldnames in Clusters und Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields or
tables) from the cross-transaction application buffer. The data objects are read in the application buffer using the ID key of the area ar of the buffer area for the table itab (see EXPORT TO SHARED BUFFER). You must use dbtab to specify a database table although the system reads from a memory table with an appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this means that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table from the application buffer with the structure INDX:
TYPES: BEGIN OF ITAB3_LINE,
         CONT(4),
       END OF ITAB3_LINE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
      F1(4),
      F2(8) TYPE P DECIMALS 0,
      ITAB3 TYPE STANDARD TABLE OF ITAB3_LINE,
      INDX_WA TYPE INDX.
Import data.
IMPORT F1 = F1 F2 = F2 ITAB3 = ITAB3
       FROM SHARED BUFFER INDX(ST) ID INDXKEY TO INDX_WA.
After import, the data fields INDX-AEDAT and
INDX-USERA in front of CLUSTR are filled with
the values in the fields before the EXPORT
statement.
Notes
You must declare the table dbtab, named after DATABASE using a TABLES statement.
The structure of the fields, structures, and internal tables to be imported must match the structure of the objects exported to the dataset. Moreover, the objects must be imported with the same name used to export them. Otherwise, the import is not performed.
The maximum total key length is 64 bytes. It must include: a client if the table is client-specific (3 characters); an area (2 characters); identification; and line counter (4 bytes). This means that the number of characters available for the identification of a client-specific table is 55 characters.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the cross-transaction application buffer are provided by the system class CL_ABAP_EXPIMP_SHBUF.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in the field f
Addition 3
... CLIENT g (after dbtab(ar))
Effect
Takes the data from the client g (if the import/export table dbtab is client-specific). The client g must be a character-type data object (but not a string).
Addition 4
... TO wa (as the last addition or after itab(ar))
Effect
You need to use this addition if you want to save user data fields in the application buffer and then read them from there later. The system uses a work area wa instead of a table work area. The target area must have the same structure as the table tab.
Example
DATA: INDX_WA TYPE INDX,
      F1.
IMPORT F1 = F1 FROM SHARED BUFFER INDX(AR)
               CLIENT '001' ID 'TEST'
               TO INDX_WA.
WRITE: / 'AEDAT:', INDX_WA-AEDAT,
       / 'USERA:', INDX_WA-USERA,
       / 'PGMID:', INDX_WA-PGMID.
Variant 6
IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... CLIENT g (before ID key )
4. ... USING form
5. ... TO wa (last addition or after dbtab(ar))
6. ... MAJOR-ID id1 (instead of ID key)
7. ... MINOR-ID id2 (with MAJOR-ID id1 )
8. ... ACCEPTING PADDING
9. ... ACCEPTING TRUNCATION
10. ... IGNORING STRUCTURE BOUNDARIES
11. ... IGNORING CONVERSION ERRORS
12. ... REPLACEMENT CHARACTER c
13. ... IN CHAR-TO-HEX MODE
14. ... CODE PAGE INTO f1
15. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Fieldnames in Clusters and Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures, or tables) from the data cluster with ID key in area ar of the database table dbtab (see EXPORT TO DATABASE).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that not data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table:
TYPES: BEGIN OF TAB3_TYPE,
          CONT(4),
       END OF TAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD,
      F1(4), F2 TYPE P,
      TAB3 TYPE STANDARD TABLE OF TAB3_TYPE WITH
                NON-UNIQUE DEFAULT KEY,
      WA_INDX TYPE INDX.
INDXKEY = 'INDXKEY'.
IMPORT F1   = F1
       F2   = F2
       TAB3 = TAB3 FROM DATABASE INDX(ST) ID INDXKEY
       TO WA_INDX.
Notes
You must declare the table dbtab, named after DATABASE, using the TABLES statement (except in addition 5).
The structure of fields, field strings and internal tables to be imported must match the structure of the objects exported to the dataset. In addition, the objects must be imported under the same name used to export them. If this is not the case, either a runtime error occurs or no import takes place.
Exception: You can lengthen or shorten the last field if it is of type CHAR, or add/omit CHAR fields at the end of the structure.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the database table specified are provided by the system class CL_ABAP_EXPIMP_DB.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... CLIENT g (before the ID key)
Effect
Data is taken from the client g (in client-specific import/export databases only). Client g must be a character-type data object (but not a string).
Example
DATA: F1,
      WA_INDX TYPE INDX.
IMPORT F1 = F1 FROM DATABASE INDX(AR) CLIENT '002' ID 'TEST'
               TO WA_INDX.
Addition 4
... USING form
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Effect
Does not read the data from the database. Instead, calls the FORM routine form for each record read from the database without this addition. This routine can take the data key of the data to be retrieved from the database table work area and write the retrieved data to this work area. The name of the routine has the format <name of database table>_<name of form>; it has one parameter which describes the operation (READ, UPDATE or INSERT). The routine must set the field SY-SUBRC in order to show whether the function was successfully performed.
Addition 5
... TO wa (after key or after dbtab(ar))
Effect
You need to use this addition if you want to save user data fields in the cluster database and then read from there. The system uses the work area wa instead of a table work area. The target area entered must have the same structure as the table dbtab.
Example
DATA WA LIKE INDX.
DATA F1.
IMPORT F1 = F1 FROM DATABASE INDX(AR)
               CLIENT '002' ID 'TEST'
               TO WA.
WRITE: / 'AEDAT:', WA-AEDAT,
       / 'USERA:', WA-USERA,
       / 'PGMID:', WA-PGMID.
Addition 6
... MAJOR-ID id1 (instead of the ID key).
Addition 7
... MINOR-ID id2 (with MAJOR-ID id1)
This addition is not allowed in an ABAP Objects context. See Cannot Use Generic Identification.
Effect
Searches for a record the first part of whose ID (length of id1) matches id1 and whose second part - if MINOR-ID id2 is also declared - is greater than or equal to id2.
Addition 8
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 9
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 10
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 8 (enlarge structure) or addition 9 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 11
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 12
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular character cannot be converted when the character set is converted. If you do not use this addition, '#' is used as a replacement character.
This addition can only be used in conjunction with addition 11.
Addition 13
... IN CHAR-TO-HEX MODE
Effect
All character-type fields are not converted. To convert a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters. Moreover, you cannot use this addition in conjunction with the additions 8, 9, 10, 11, and 12.
Addition 14
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 15
... ENDIAN INTO f2
Effect
The byte order(LITTLE or BIG) of the exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 7
IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
This variant is not allowed in an ABAP Objects context. See Cannot Use Clusters in Files
Note
This variant is no longer supported and cannot be used.
Variant 8
IMPORT obj1 ... objn FROM LOGFILE ID key.
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Extras:
1. ... = f (for each field f to be imported) 2. ... TO f (for each field f to be imported)
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Field Names in Clusters
Effect
Imports data objects (fields, field strings or internal tables) from the update data. You must specify the update key assigned by the system (with current request number) as the key.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. An incorrect ID may have been used.
The contents of all objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Variant 9
IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... CLIENT g (after dbtab(ar)) 2. ... TO wa (last addition or after dbtab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Table Work Areas.
Effect
Imports an object directory stored under the specified ID with EXPORT TO DATABASE into the table itab. The internal table itab may not have the type HASHED TABLE or ANY TABLE.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The directory was successfully imported.
SY-SUBRC = 4:
The directory could not be imported, probably because an incorrect ID was used.
The internal table itab must have the same structure as the Dictionary structure CDIR (INCLUDE STRUCTURE).
Addition 1
... CLIENT g (before ID key)
Effect
Takes data from the client g (only with client-specific import/export databases). Client g must be a character-type data object (but not a string).
Addition 2
... TO wa (last addition or after dbtab(ar))
Effect
Uses the work area wa instead of the table work area. When you use this addition, you do not need to declare the table dbtab, named after DATABASE using a TABLES statement. The work area entered must have the same structure as the table dbtab.
Example
Directory of a cluster consisting of two fields and an internal table:
TYPES: BEGIN OF TAB3_LINE,
         CONT(4),
       END OF TAB3_LINE,
       BEGIN OF DIRTAB_LINE.
         INCLUDE STRUCTURE CDIR.
TYPES END OF DIRTAB_LINE.
DATA: INDXKEY LIKE INDX-SRTFD,
      F1(4),
      F2(8)   TYPE P decimals 0,
      TAB3    TYPE STANDARD TABLE OF TAB3_LINE,
      DIRTAB TYPE STANDARD TABLE OF DIRTAB_LINE,
      INDX_WA TYPE INDX.
INDXKEY = 'INDXKEY'.
EXPORT F1 = F1
       F2 = F2
       TAB3 = TAB3
       TO DATABASE INDX(ST) ID INDXKEY " TAB3 has 17 entries
       FROM INDX_WA.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE INDX(ST) ID INDXKEY
       TO INDX_WA.
Then, the table DIRTAB contains the following:
NAME     OTYPE FTYPE TFILL FLENG
F1         F      C      0      4
F2         F      P      0      8
TAB3       T      C      17     4
The meaning of the individual fields is as follows:
NAME:
Name of stored object
OTYPE:
Object type (F: Field, R: Field string / Dictionary struc

No Upload of Internal order from CRM to R3

Service Confirmations , with header user status "Retun Needed" cannot find Internal Order in R3. Only when re-processed, i/o is found and processed.
Process
service engineers create ServConf (ZT11) as follow-up for service orders. In this Service Confirmation the engineer can set the Header User Status, and he can choose for 'Return Needed'. In that case, an extra S10-line is added to the ServiceOrder (the 'return' line), to be closed later during the return visit.
When a confirmation is closed with the code 'Return Needed', it will be distributed to R3, but R3 cannot find the internal order for this Service Order, although it exists in the system (I checked every single case).
These confirmations show up on my error-list (as 'Object link not found in CO').
When I re-process these confirmations, the internal order is found and processing is OK, so It seems like the system is still busy with creating the extra S10-line, and updating the internal order, when the same internal order is needed to process the confirmation.
Can you check this please, because I have several of these cases per day, and it is keeping us from invoicing these Confirmations.
Regards,
JAN.

Hi,
Use one of the follwoing FMs as per your requirements:
CRM_ISA_ORDER_HEADERSTATUS
CRM_ORDER_CHANGE_STATUS
CRM_STATUS_MAINTAIN_OW
STATUS_MAINTAIN
Kindly reward with points in case helpful
Sharif

Purchase Order can't captured Internal order from Asset Master

Hi experts,
I am creating a PO to purchase asset and so using the category Asset. In the asset master, I have defined the Internal Order (investment order) number.
At the Account Assignment tab, I entered the asset number in the PO and it is supposed to capture the Investment Order number from the asset master to the "Order" field as well. But it was not.
Can any of the expert here advise? Any configuration is required at the PO level?
Thank you so much. will assign point for solutions

Hi
There is no configuration setting in the Procurement/Purchase for defaulting the
order number.
As I know there is no setting to setting available in controlling also
for calling the urder number thru asset in a PO.
Order number comes from the default assignment to
Cost element,Cost center and Order in OKB9 transaction.
Please contact the controlling before coming to a conclusion.
Regards
Rammohan.

IW32 - restriction or validation to accept only internal order from a plant

HI team!!
I´m needing your help
Im working with Tcode IW32 when creating a maintenance order and we got through Goto / Settlement rule we can assign any internal order number.
there is no restriction or validation to accept only internal order numbers from the corresponding plant, this condition may affect other entities
How can I limit it?
Thks & regards "

In configuration, in settlement rule, restrict receiver other than internal order. In case if you want to have internal order as a receiver but restrict only some orders, you can do that using a user exit/badi at save.
example user exit -IWO10009

Transfer of Internal Order from One Company Code to another Compnay Code

Dear All
My client has 3 Company Code. say A,B,C out of which one of the company code they are closing.They had internal order in old compnay say B which they are closing. Company B had internal order which was raised for employee advances.
Client wants to transfer Intenal order from company B to Company A.
Please suggest.
Regard's
Rahul Jain

You can change the company code in the assignment tab & change the settlement rule accordingly.
Please note in case of statistical orders, you will not be able to change the default cost center, in case postings have already taken place.
Regards
Rakesh Pawaskar

Results Analysis Settle Internal Order (from CRM) - No cost element allowed

In SPRO results analysis configuration to "Define Posting Rules for Settlement to Financial Accounting" I am not allowed to use an account with a cost element. (Error: I get error KQ 119 G/L account ### cannot be created as a cost element.)
I configure a G/L account with no cost element. KO88 Settlement posts to G/L account fine; however, does not post to the internal order because the config mentioned on first line does not allow me to use an account with a cost element.
Problem: I am unable to see settlement in KOB1 report because settlement goes to GL Account, but does not post to the internal order.
Failed solution: I tried to use OKC9 substitution at KO88 to substitute the internal order number. The problem is that table AUFKV is empty when the substitution runs at KO88 settlement. I am not able to substitute the order number because the order number isn't even available in the substitution at internal order settlement.
I put a break manual break point in program GBTACCOB at the call to the substitution rule I defined. The breakpoint stops at the substitution when I run KO88 settlement; however, fields are blank. I am unable to do substitution. I know this works because I have a similar substitution on the same internal order for accounting indicator when doing an MB1A goods issue to an internal order. The break point stops there and the AUFKV data is available for substitution rule.
Question:
Any suggested solutions to to have internal order update into KO88 settlement after KKA1 results analysis would be helpfull.

It is more of a reporting issue really.
The problem is that internal order settlement with settlement profile instead of results analysis does post the settlement to the internal order and does use a cost element. This is the business process the users currently have. Our users have a requirement to settle the orders weekly. This helps them find issues earlier and speeds up the month end close.
In the past we could use KOB1 and see the current balance of an internal order and see the settlement. Now that report no longer shows the settlement. How can I see what has been settled on an order and what hasn't now?

Cant import raw files from pentax k20d

I have a Pentax k20d and iPhoto6 will only import JPGs. iPhoto will not import RAW files from my camera. I can't find if its supported but can only assume its not.

You'd think that apple would add raw file compatibility with the next of its numerous iphoto 6 updates...
I wouldn’t think that at all. Iphoto 6 has not been developed since 2006, nor updated since 2006. I would not expect any further enhancement to it.
or maybe its just the pentax as in iphoto 6's advanced settings there are options to "save edited RAW files as 16 bit TIFFS" and "use RAW files with external editor".iPhoto 6 has not been developed since 2006.
It’s not just the Pentax. Those RAW options are there in everyone’s iPhoto 6 and later. However, RAW formats differ not just between brands of Camera but also between different models of the same Brand. So, RAW support is added on a model by model basis and not all models are supported. The K20D was announced in January 2008. The RAW format you want supported didn’t even exist when the iPhoto 6 was in development or the current version of the application.
Further, as RAW support is a function of the Operating System, and involves a patch to the OS, it was added to the OS current at the time - 10.5.
Regards
TD

Import internal table from query to report

Hi,
I have to import an internal table% G00 with its contents from a query in a custom report. I use the import statement but I do not acknowledgment the table. You can help me.
thanks

Hi,
standard program behind the query does not have any EXPORT statement statement behind it so it does not make sense to IMPORT. It'll never IMPORT.
You can use the following way:
    SUBMIT (report_name) USING SELECTION-SCREEN <sel_screen_number> EXPORTING LIST TO MEMORY AND RETURN.
and then use
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject = list_tab
    EXCEPTIONS
      not_found = 1
      OTHERS     = 2.
IF sy-subrc = 0 AND list_tab IS NOT INITIAL.
   CALL FUNCTION 'LIST_FREE_MEMORY'.
      CALL FUNCTION 'LIST_TO_ASCI'
        TABLES LISTOBJECT = list_tab
                      LISTASCI   = output.
     FREE MEMORY ID '%_LIST'.
ENDIF.
output is your output table.

Importing internal table from diffrent program

HI experts,
i have two ALV report zprograms . My requirements is i have to write a report in that report i want to pass input screen parameters to each report and get their final intarnal table without generating ALV. How is it possible.
my question is i want to call any program and export values of thier screen parameter and get the final internal table as export.
Pls Help. THanks in advace
Ajay Kuamr

Hello Ajay,
In each of the report you can EXPORT the internal table contents to SAP memory & IMPORT the table contents in the third program.
You have to use SUBMIT statements for each report & get back the internal table using IMPORT statements.
For further details explore SDN.
BR,
Suhas

I cant import internal order from corrections form in OM responsability

Similar Messages

Maybe you are looking for