I couldn´t see imported videos with Adobe Premiere pro

Hello:
My name is Oren. I´m from Spain, and this is my problem.
One month ago I bought a Toshiba Satellite 850-31M. It has an x64 processor, 16 GB of RAM and I have 2 hard drives, the c: an SSD of 500 GB and other of 1 Tb hardisk, configured as D:. It has a GeForce GT 630M graphics card with 2 GB of RAM. W8 operating system.
I wanted to try the Adobe Premiere Pro CS6 and I downloaded the trial version. No problem, until I tried to import a video in the source window. Appears a small window that says "importing" and give to play in the source window and start .Audio be heard, but not the image. I've tried different video formats and always the same. The same video are seamlessly Quick Time and other video viewers ..... I do not know what to do, I think I've tried everything, even restart the computer to its factory settings and install Adobe Premiere vacuum and the problem remains. I tested with a trial of Premiere CS5.5 and got it. You hear the audio but no video . Insert the video in the timeline and recognizes it as such, even the first frame, but said, is not seeing in the "source", nor in the preview, only the audio.
What could it be? Am I you could lend a hand I'm desperate?
thank you very much

Hello:
I have the vídeos in a hard-disk. I'd tried in different video formats and
always the same. I hear the audio but I couldn't see the video image.
El jueves, 25 de abril de 2013, Jim Simon escribió:
   Re: I couldn´t see imported videos with Adobe Premiere pro  created by Jim
Simon <http://forums.adobe.com/people/JSS1138> in Premiere Pro - View
the full discussion <http://forums.adobe.com/message/5265806#5265806

Similar Messages

  • FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

    FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
    Any solution * Advance Thanks

    FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
    You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

  • Importing AVIs into Adobe Premiere Pro CS3 !!!

    Heres what Im trying to do: We have been working on a PC Leitch Velocity Q NLE system for the past couple years and just got 2 new Matrox Axio LE NLEs with Adobe Premiere Pro CS3. We are trying to get all our old projects from the Velocity system onto our Matrox systems and not sacrifice any of the video quality. I've been thinking that the best way to do this is by compressing old projects to AVI format from the Velocity system and move them over to the Matrox using an external hard drive.
    I was actually able to bring in an AVI from the Velocity system onto the Matrox yesterday using the same Velocity settings below, except that I changed the aspect to 720 x 480 and the audio sample rate to 48,000. When playing the video on the timeline in Premiere the video looked great on my computer monitor but on my external NTSC monitor all motion in the video looked a little jerky as if frames are missing. I tried importing the test clip into both Matrox uncompressed 8-bit and uncompressed 10-bit projects and had the same resulting jerky looking video. Even after rendering the clip the video looked the same. Then I tried exporting the clip to mpeg using the Matrox media encoder but saw no change in the jerky movement. Here are my project and export setting for both systems.
    The AVI was made on a PC Leitch Velocity Q NLE system. My project settings on the Velocity system are;
    29.97 drop frame
    720 x 486 24 Bit
    Interlaced field order B
    Sub pixel off Cropping off
    Audio:
    16 sample
    44 / samples / second
    2 channel
    Export settings are; (These are the settings I was trying the first time that didnt work. All I changed the second time was the aspect ratio to 720 x 480 and the audio sampling rate to 48.)
    AVI
    Frame rate 29.97
    720 x 486
    No Compression
    Color 24 Bits
    Field handling interlaced field order B
    Audio:
    16 sample
    Sampling rate 44
    2 channels stereo
    Do you recommend compressing the video coming out of Velocity?
    There are a couple other options other than No Compression in the export dialogue such as: Microsoft H.263 video codec, Microsoft H.261 video codec. I definitely want to maintain the highest quality possible.
    Matrox Axio LE project settings
    Editing mode: Matrox NTSC
    Timebase: 29.97 fps
    Video
    Frame Size: 720 x 486
    Pixel Aspect Ratio: D1 / DV NTSC (0.9)
    Fields: Lower field first
    Display: Format 30fps Drop Frame Timecode
    Audio: Sample 48,000 Hz
    Display: Audio sample
    Video Rendering: Maximum bit depth is Unchecked
    Previews: File format Matrox uncompressed 8-bit NTSC (tried Matrox uncompressed 10-bit too.)
    I think the jerky video might be due to dropping frames but Im not sure.
    Any help is greatly appreciated!

    While it seems that the field order is consistent, I have seen issues where converting from clips that change field order creates this sort of problem. This is particularly obvious when converting from MJPEG codecs like Meridien or Miro/Pinnacle to DV.
    What happens if you just import the files into Premiere and let it do the rendering to the project settings?

  • Color on exported video on Adobe Premiere Pro Is a bit off from the original source video

    I have both Cyberlink powerdirector 10.0 and Adobe Premiere Pro C6
    I noticed that adobe premere cs6. when exporting the video.. colors are a little off.. never matching the same tones as the original
    source
    i took a screenshot  so you can see what i mean.. Notice Adobe is a a little mor orange. is there a way to fix this? Cyberlink powedirector always matches the source color when you export it. except Adobe Premiere Pro CS 6
    i have windows 7 64 bit (Nvidia GeForce GTX 670M

    Thanks for answering. I ddi notice different media players show colors different. But on the screenshot i just showed you.. all 3 are from the same media player.
    For some reason everytime i export a video from Adobe premiere pro the color is never the same as the source on media player. I tried it on 4 different videos. Other software programs like cyberlink power director export the video with no color change.
    1)The original source from the picture is a mpeg-4 (avc)
    2)i always use wmv codec to encode all videos. So the shot from Premiere Pro was using WMV codec. and the other shot (cyberlink powerdirector) was also wmv to encde.
    3) I even tried to see if maybe i used a  different video format to encode it would fix the slight color change. like h264 and mov.. but nope still same issue
    4) I did what you told me to show the source and exported video on Adobe Premiere and really weird. the exporterd video from Adobe Premiere now shows the exact color as the source.. but the exported video from Cyberlinkpowerdirector shows the color a bit different.
    Heres the media codec information
    Original Souce Video
    General
    Complete name                            : C:\Users\User\Downloads\meh_1280x720.mp4
    Format                                   : MPEG-4
    Format profile                           : Base Media / Version 2
    Codec ID                                 : mp42
    File size                                : 358 MiB
    Duration                                 : 9mn 39s
    Overall bit rate                         : 5 178 Kbps
    Encoded date                             : UTC 2012-08-15 09:47:22
    Tagged date                              : UTC 2012-09-19 02:29:56
    Video
    ID                                       : 1
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : [email protected]
    Format settings, CABAC                   : No
    Format settings, ReFrames                : 2 frames
    Codec ID                                 : avc1
    Codec ID/Info                            : Advanced Video Coding
    Duration                                 : 9mn 39s
    Bit rate                                 : 4 918 Kbps
    Width                                    : 1 280 pixels
    Height                                   : 720 pixels
    Display aspect ratio                     : 16:9
    Frame rate mode                          : Constant
    Frame rate                               : 23.976 fps
    Color space                              : YUV
    Chroma subsampling                       : 4:2:0
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 0.223
    Stream size                              : 340 MiB (95%)
    Language                                 : English
    Encoded date                             : UTC 2012-08-15 09:47:21
    Tagged date                              : UTC 2012-08-15 09:47:45
    Color primaries                          : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
    Transfer characteristics                 : BT.709-5, BT.1361
    Matrix coefficients                      : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
    Audio
    ID                                       : 2
    Format                                   : AAC
    Format/Info                              : Advanced Audio Codec
    Format profile                           : LC
    Codec ID                                 : 40
    Duration                                 : 9mn 39s
    Bit rate mode                            : Constant
    Bit rate                                 : 256 Kbps
    Channel(s)                               : 2 channels
    Channel positions                        : Front: L R
    Sampling rate                            : 48.0 KHz
    Compression mode                         : Lossy
    Stream size                              : 17.7 MiB (5%)
    Language                                 : English
    Encoded date                             : UTC 2012-08-15 09:47:21
    Tagged date                              : UTC 2012-08-15 09:47:45
    Codec Infomation after encoding video on Adobe premiere pro (WMV)
    General
    Complete name                            : C:\Users\User\Documents\Adobe\Premiere Pro\6.0\testmeg_1280x720.mp4.wmv
    Format                                   : Windows Media
    File size                                : 498 MiB
    Duration                                 : 9mn 39s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 7 205 Kbps
    Maximum Overall bit rate                 : 10.1 Mbps
    Encoded date                             : UTC 2012-09-18 23:11:30.285
    Video
    ID                                       : 1
    Format                                   : VC-1
    Format profile                           : MP@HL
    Codec ID                                 : WMV3
    Codec ID/Info                            : Windows Media Video 9
    Codec ID/Hint                            : WMV3
    Description of the codec                 : Windows Media Video 9 - Professional
    Duration                                 : 9mn 39s
    Bit rate mode                            : Constant
    Bit rate                                 : 10 000 Kbps
    Width                                    : 1 280 pixels
    Height                                   : 720 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 24.000 fps
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Compression mode                         : Lossy
    Bits/(Pixel*Frame)                       : 0.452
    Stream size                              : 691 MiB
    Language                                 : English (US)
    NumberOfFrames                           : 13907
    Codec information for exported video on Cyberlink Power Director
    General
    Complete name                            : C:\Users\User\Documents\Produce_251.wmv
    Format                                   : Windows Media
    File size                                : 419 MiB
    Duration                                 : 9mn 39s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 6 055 Kbps
    Maximum Overall bit rate                 : 6 371 Kbps
    Encoded date                             : UTC 2012-09-18 22:45:31.348
    Video
    ID                                       : 2
    Format                                   : VC-1
    Format profile                           : MP@HL
    Codec ID                                 : WMV3
    Codec ID/Info                            : Windows Media Video 9
    Codec ID/Hint                            : WMV3
    Description of the codec                 : Windows Media Video 9 - Professional
    Duration                                 : 9mn 39s
    Bit rate mode                            : Constant
    Bit rate                                 : 6 000 Kbps
    Width                                    : 1 280 pixels
    Height                                   : 720 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 29.970 fps
    Bit depth                                : 8 bits
    Scan type                                : Progressive
    Compression mode                         : Lossy
    Bits/(Pixel*Frame)                       : 0.217
    Stream size                              : 415 MiB (99%)
    Language                                 : English
    NumberOfFrames                           : 17366
    Audio
    ID                                       : 1
    Format                                   : WMA
    Format version                           : Version 2
    Codec ID                                 : 161
    Codec ID/Info                            : Windows Media Audio
    Description of the codec                 : Windows Media Audio 9.2 - 320 kbps, 44 kHz, stereo (A/V) 1-pass CBR
    Duration                                 : 9mn 39s
    Bit rate mode                            : Constant
    Bit rate                                 : 320 Kbps
    Channel(s)                               : 2 channels
    Sampling rate                            : 44.1 KHz
    Bit depth                                : 16 bits
    Stream size                              : 22.1 MiB (5%)
    Language                                 : English

  • XDCAM HD workflow with Adobe Premiere Pro CC and Macbook Pro

    Hi folks,
    I have an assignment for a TV production to secure and convert the data (mxf files XDCAM HD 422 1080i 50 / 50 Mbit/sec with 8 audio channels) from Sony XDCAM camcorders (PDW-700) for postproduction.
    The producer wants me to convert the mxf files during production to Apple ProRes 422 (HQ) for faster and smooth editing during postproduction.
    I'm not sure about the final output yet, but I guess it will be either 720p50 or 1080i 25, since the production will be broadcast and as far as I know this is the standard for HD on German television. It is also not clear which NLE will be used for editing (usually one of the producers edits their projects with FCP, but this time they've got their hands full and are still looking for someone to outsource postproduction.
    Unfortunately, my Macbook is getting fixed as we speak, so I can't try things out.
    Since this is the first time I'm doing this workflow, could someone please check if I got everything right?
    1. Can someone please confirm that I can actually convert the mxf files using AME CC to Apple ProRes 422?
    Or do I need to install any other tools/converters for this task? Does MPEG streamclip do the job? Any other freeware?
    2. When converting to Apple ProRes422, the producer suggested to deinterlace the footage (1080i 50) to 25p, if 720p or 1080p I have to find out tomorrow since our conversation got interrupted this afternoon.
    In my opinion this doesn't make sense, though. First, if output to 1080i 25 it has to stay interlaced anyway. Second, in case the output will be 720p 50 I would edit the footage either natively or in Apple ProRes 422, but leave deinterlacing until the very end when outputting to the final format. This way I could use an advanced deinterlacer, e.g. the one from Magic Bullet Suite, rather than just checking some deinterlace box in the export settings for Apple ProRes 422.
    The reason the producer suggested to deinterlace right away when using  an intermediate like ProRes was that she and the client got irritated by the jagged lines from the interlaced footage when editing the last project with the same requirements on a progressive display.
    3. What would be the best solution to tackle this issue (jagged lines) during editing?
    As I said my Mac is getting fixed, so I have no way of trying things out,and I usually edit DSLR footage which is progressive anyway.
    But if I remember correctly I can switch my monitor between 1080p and 1080i. This should do the trick, shouldn't it?
    4. Can I keep all of the 8 audio tracks when converting to ProRes using AME CC ?
    5. Is ProRes422 (HQ) really necessary, or is the regular quality sufficient for this kind of job?
    6. Let's assume the whole project would be edited within Adobe Premiere Pro CC and  system specs as stated below:
    Since Adobe Premiere Pro CC has native support for  XDCAM HD is there any advantage of using an intermediate like ProRes at all?
    How smooth is native editing with XDCAM HD in Premiere Pro CC? I don't think there will be more than 3-4 video tracks in use...
    Thanks for your help!
    working with
    Adobe Premiere Pro CC and Adobe Media Encoder CC
    Apple MacBook Pro
    Intel Core  i7 Quad Core Prozessor
    2.3 GHz and 6MB L3 Cache
    16 GB RAM 1600MHz DDR3,
    256 GB SSD
    Intel HD Graphics 4000 512MB + nVidia GeForce GT 650M with 1 GB GDDR5 RAM

    Thanks Jim! I knew there must be a reason xdcam is widely uses for eng aquistion :) I think they used FCP 6 or 7 on their last project... So what about monitoring interlaced footage on a progressive screen? Any advice on that? Is there a converter built in to APP CC that deinterlaces in realtime when monitoring interlaced sources on a progressive screen? And would you agree that deinterlacing source material is best left right before outputting?

  • How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

    Hi there,
    I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
    How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
    So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
    Any established hardware/convertor to recommend ?
    Thanks

    Ryan,
    For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
    One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
    Good luck,
    Hunt

  • Export multichannel mp4/h.264 with Adobe Premiere Pro CC

    Dear community,
    we currently test the Adobe Premiere Pro CC trial (German) on a Windows 7 Professional PC.
    However, we are not succentful in exporting a multichannel mp4/H.264 clip.
    We haven't found an answer on our issue so far, so I hope that this question was not answered several times before in this forum.
    If we chosse the H.264 exporter, we cannot select a multichannel audio export (only mono, stereo, 5.1).
    In contrary, if we select the Quicktime exporter, we are able to export our sequence with a 4 channel audio master with 4 mono tracks, but we can only export it with a DVCPro Codec in a mov container.
    If we try to select a HD H.264 preset we get an error alert stating that the preset contains a not compatible video codec.
    What are we doing wrong?
    Thanks for every suggestion.
    Thanks in advance
    André

    Thanks for your thoughts, Richard.
    Your are right, we currentky use the Adobe Premiere Creative Cloud version.
    We managed it to solve at least the error message. It was caused because Quicktime was not installed together with the Adobe Premiere Pro / AME setup on our computer.
    After we installed Quicktime 7 manually, we can select a Quicktime/H.264 preset without any problems within the exporter settings.
    However, the Quicktime/H.264 export dialog seems to only allow a mono or stereo audio export. No multichannel-audio export.
    This possibility is only displayed in Richards case, if we select the Quicktime exporter and an Uncompressed Video or DV preset.
    Our question to the Adobe developer guys is the reason behind this limition? Other video authoring prograns can export a mp4 with H.264 Codec with multichannel AAC without any problems.
    How can we do this with Adobe Premiere Pro (not necessarily via Quicktime)?
    André

  • White noise in video problem - Adobe premiere pro 4

    Sometimes i face this issue when making projects with Adobe Premiere Pro 4.
    Original movie file played with VLC player looks good - like "converted" (just converted using external program, codec H.264/Mpeg4) in Premiere.
    But original movie from camera in Premiere sometimes (that's very random) looks like with white splashes or so. (00:01 ; 00:11 ; 00:17)
    What's the problem? It consumes alot of time to convert alot of videos, maybe there's a bypass in this issue?

    >original movie from camera in Premiere
    What IS your original movie?
    Codec & Format information, with 2 links inside to read
    -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Avid Unity with Adobe Premiere Pro CC and After Effects

    Has anyone used Avid Unity for media with Adobe Premiere Pro CC? I'd like to hear some feedback as we are working on doing that right now, and I'd like to know what the hurdles or pitfalls might be.

    Open System Preferences > Mouse and/or Trackpad.
    Adjust the speed.
    If that fails, try running the combo updater.
    OS X Mavericks 10.9.3 (Update (Combo)
    http://support.apple.com/kb/DL1746

  • Importing Videos To Adobe Premiere Elements 11 Only Shows Black Screen

    Why is it Importing WMV Videos To Adobe Premiere Elements 11 Only Shows Black Screen.
    Thank You In Advance

    mrtomr4455
    Forget about all the rest until you check out the Announcement at the top of this forum regarding the current 1/2 wmv display related to a recent Windows Update kb file. I missed the wmv part of your initial question by focusing too much on the thread title.
    Here is a copy for your convenience
    Announcement: Windows Update Causes Half of Display to Be Blacked Out
    Hide Details
    MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
    "MS bulliten MS13-057.  Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
    For us, it occurs when decoding WMV9 files.  Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
    You can uninstall these windows updates to resolve your problem."
    There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
    Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
      by Bill Hunt (Aug 2, 2013)
    I think that is your answer. Please let us know if that worked for you.
    Thanks.
    ATR

  • How do you export 4 discrete mono audio tracks with video from Adobe Premiere Pro 4/Adobe Encoder?

    I've posted this question in different terms a few times and have not had an answer.  I can't find the answer on the Premiere Pro support site either (which makes me think that a simple solution doesn't exist)
    We use adobe premiere pro 4.  We capture DVCAM tapes with 4 discrete audio channels.  When we export the video using adobe encoder, the result is stereo tracks with the discrete audio channels mixed together which is completly useless to us.  When I select Mono for the output settings, two channels of audio are mixed into one audio channel.  Also useless. 
    When capturing the clip, we always use the mono timeline and modify the clips to mono. We can edit the discrete audio channels but when we export the video, the audio is mixed down. 
    this is the problem.  Each of our  4 audio channels contain a different language of dialogue.  When exported, these 4 get mixed down to 2 mixed channels blending of course the language. 
    Can Premiere Pro 4 export discrete mono audio channels?  How do you do it?
    Does version 6 have the ability to export 4 discrete mono channels?

    Hi Steve,
    Important info is missing from your post - what format are you wanting to export to, and for what purpose? We need to know how the exported file is intended to be used. Who's going to view it, using what gear? Is it for another editor to work with? End user viewing?
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

    Hello
    We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
    Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
    We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
    The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
    It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
    Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
    Dennis
    (Workstation:  Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
    Mediainfo of the P2-Cards:
    General
    Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 3.92 GiB
    Duration                                 : 2mn 28s
    Overall bit rate                         : 227 Mbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Video
    ID                                       : 2
    Format                                   : AVC
    Format/Info                              : Advanced Video Codec
    Format profile                           : High 4:2:[email protected]
    Format settings, CABAC                   : No
    Format settings, GOP                     : N=1
    Format settings, wrapping mode           : Clip
    Codec ID                                 : 0D01030102106002-0401020201323104
    Duration                                 : 2mn 28s
    Bit rate                                 : 227 Mbps
    Width                                    : 1 920 pixels
    Height                                   : 1 080 pixels
    Display aspect ratio                     : 16:9
    Frame rate                               : 50.000 fps
    Standard                                 : Component
    Color space                              : YUV
    Chroma subsampling                       : 4:2:2
    Bit depth                                : 10 bits
    Scan type                                : Progressive
    Bits/(Pixel*Frame)                       : 2.193
    Stream size                              : 3.92 GiB (100%)
    Color primaries                          : BT.709
    Transfer characteristics                 : BT.709
    Matrix coefficients                      : BT.709
    Mediainfo Audio-Datei P2-Card:
    General
    Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
    Format                                   : MXF
    Format profile                           : OP-Atom
    Format settings                          : Closed / Complete
    File size                                : 13.6 MiB
    Duration                                 : 2mn 28s
    Overall bit rate mode                    : Constant
    Overall bit rate                         : 770 Kbps
    Encoded date                             : 2014-10-15 13:33:41.000
    Writing application                      : Panasonic P2 2.0
    Writing library                          : Panasonic P2 2.0
    Audio
    ID                                       : 3
    Format                                   : PCM
    Format settings, Endianness              : Little
    Format settings, wrapping mode           : Clip (AES)
    Codec ID                                 : 0D01030102060400
    Duration                                 : 2mn 28s
    Bit rate mode                            : Constant
    Bit rate                                 : 768 Kbps
    Channel(s)                               : 1 channel
    Sampling rate                            : 48.0 KHz
    Bit depth                                : 16 bits
    Stream size                              : 13.6 MiB (100%)

    Hi,
    we have the same problem!
    It is not possible to play audio with the AVC-Intra100 Codec fluently.
    Can anybody help?
    Thanks,
    Anja

  • Media Pending with Adobe Premiere Pro CS4

    First of all guys, I know this is not a brand new issue but please help me out as am providing details. Thank you.
    I have JVC Everio jvc everio gz-hd5 60GB camcorder. As you probably know that it records file into .TOD format, I converted them into .MPG format. This is how I am importing to Adobe Premiere Pro CS4 before it's showing me golden little screen displaying PENDING MEDIA forever.
    1. Import -> new project
    2. Capture format -> HDV
    3. Available Preset -> HDV108030p
    Operating system detail
    Microsoft XP Pro Version 2002 Service pack 3
    2.19 GHZ, 1.99GB RAM, Intel core 2 duo CPU
    p.s - I read some forums but the way they explained is too confusing.

    I dont think I have enough info about your computers and hard drives and so on to tell if you can really edit HD stuff , but at this point you should really convert the TOD file first anyway. I don't think just renaming the extension will make it work OK, but I found some info on the internet that might help you convert to a more editor friendly format...
    Standard definition video is stored in MPEG program stream container files with MOD  extension; in most other systems these files have extension MPG or MPEG.  High definition video is stored in MPEG transport stream container files with TOD  extension; in most other systems these files have M2T extension.[2] Transport stream files can be converted into more common program stream  files without recompressing the video itself. For example, FFmpeg,  a free software program, performs the conversion on Windows  and Linux systems with the following command: ffmpeg -i myclip.TOD  -acodec copy -vcodec copy myclip.mpg. Software, included with TOD  camcorders, performs this conversion as part of capture process. A  similar command is used for MOD files: ffmpeg -i myClip.MOD -vcodec  copy -acodec ac3 -ab 384k myClip.mpg -acodec mp2 -ab 192k -newaudio.
    You Gspot screenshot is good, and it shows that it doesn't recognize anything about the codec and codec name..the right side of the GSpot is usually full of information about the video file...like the frame size, FPS , aspect ratio, and so on.  As you can see from the above paragraph you would probably benefit from converting the TOD file using FFmpeg or some other program like streamclip ( also free program )
    That's your first step I think...
    You will have to know what your video file is...from the camera manual you can find out the frame size and fps used, whether it is progressive or interlaced, etc...  The reason you will need to know about your video file is because when you open the TOD file in a program like streamclip to convert it, you will want to convert it to basically the same specs, but with as a different "codec" and file type....but keep the same video characteristics as the original.

  • Horizontal lines across video in Adobe Premiere Pro 2.0

    I had used a software called Virtualdub to deinterlace and remove lots of garbage from the edges of a video. I had also used a software called Neat Video inside of Virtualdub to remove a lot of grains from my vhs video.   I prefer to use Adobe Premiere because it's superior to Virtualdub when it comes to color correction.   That is my own opinion, however,  I imported the video from Virtualdub into Adobe Premiere.  I did some color corrections on my vhs video.  The video looks a whole better than the original.  I saved the video with the color correction and exported it as an avi file.  I exported the same video into Pinnacle to burn on a dvd.  I noticed that the video had a lot of  fine horizontal lines going across it.  I would like to know what am I doing wrong with all of  these procedures.  I'm a beginner trying to learn how to use Adobe Premiere Pro 2.0. for video editing.  I would like to use this software totally to edit my video instead of using Pinnacle software. I hope that my problem isn't too complicated.  Thanks.
    Gerald Sr.

    You can do everything in Premiere: you do not need VD or Pinnacle.
    First of all I would not deinterlace nor get rid of the edge gargage of the original footage in VD.
    Depending on how the deinterlacing is being done, it still will bring down the quality off the footage.
    If its for dvd on a standalone player just leave it interlaced.
    Edge garbage is easily removed in Pro2 by scaling up the footage a tiny bit.
    I would only use Neat Video in VD and export the footage to avi with the Lagarith codec which will give you a lossless file.
    http://lags.leetcode.net/codec.html
    Or skip VD and get Neat Video as a plugin for Premiere
    In Premiere you can create dvd's and besides it has a much better mpeg2 encoder then Studio has.
    This is a good site for learning Premiere Pro2:
    http://www.lynda.com/Premiere-Pro-2-tutorials/essential-training/219-2.html

  • Photoshop didn't install with adobe premiere pro

    I recently installed adobe premiere pro CS6.  I don't see Photoshop or After Effects as an application.  Note:  I previously had Adobe Elements 12.  Do I need to uninstall that in order for Photoshop CS6 to install?  I am definitely a newbie so please be gentle...

    with your two licenses you can install and activate both.  if you need installation files:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for