I create an enterprise project template in Project Professional but when I go to create a project in PWA the formattting does not carry through to the project
Hi
Project Server 2010
I created an enterprise template in Project Professional and formatted it and set the font to Gill Sans MT, I then pointed the Project type to this project template.
When I created the new project type in PWA the formatting and font did not carry through to the new project.
Has anyone seen this behaviour before?
Kind regards
M
Do you find that if you create a project in project professional using a template and then save it the formatting is shown OK? So you only see this problem when you are creating the project from PWA and the plan template is picked up via the Enterprise Project
Type?
Similar Messages
-
I just purchased a new PC with windows 8.1 and downloaded new itunes, but when I try to "restore" my music library from the DVDS i made from my old pc it doesn't automatically restore my library as it used to. How do I restore my music library from DVDS?
Thanks but I already did read all of the help notes, which aren't very helpful for this. I did find out the problem- Apple.....they evidently changed one of the major upsides to their old software- being able to back up your entire library onto dvd's- so you can longer do that or restore from the dvds created from older versions of itunes. I suspect greed is at play in that Apple now wants you to pay $24.95 per year to use a "cloud" service where they back it up for you. I can buy a lifetime supply of back up dvds for one year's worth of cloud. So I am now looking into other music software as I am Appled-out. There is no reason for them to take away the back up portion of the software other than to sell you thrir cloud service. As we have already given them a ton of money for 5 Ipods and a bunch of music, I think we have contributed enough. Time to look to solutions outside of the Apple money tree. But thank you for reading and replying.
-
In Dreamweaver 6, I created a new fluid layout. I set up (4) DIVs. In the 3rd div, I changed the font color. The new color shows up on the website when viewed in my computer desktop, but, when viewed in a tablet and a cell phone, the color of the font does not change. It's the same in Dreamweaver's Live view. It shows the new color on Desktop view and not in the cell phone or tablet view. Also, I changed the font itself in one of the DIVs and it shows up in the new font on the desktop view and website viewed thru the computer, but, not on the tablet or cell phone. Can someone please explain. I want to be able to change the fonts and colors for viewing in the tablet and cell phone, also. The fonts were all standard fonts. Sans-erif and Verdana and Arial were tried. Thanks.
I will lock this discussion because of duplicate post.
-
We're trying to import a dacpac to azure via the new SqlManagementClient DacOperations ImportAsync api I get an exception with the error: "Cannot create a BACPAC from a file that does not contain exported data."
This same dacpac imports fine using an alternate but less friendly API from sql server's tooling. We'd like to use the new management SDK instead for various reasons.Hi Kyle A Wilt,
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
I have an existing ipod that I use with my mac. I am trying to connect an additional ipod to it but when I try and register, it just brings up the existing info. I don't want to lose the original info or library - just create new for this device. Pls help...
We are starting from the beginning like its a new ipod starts out asking language, country,location services,choose a network,and when we get to "setup ipod touch " there are 3 options 1..setup as new ipod, 2.restore from ipod backup 3 restore from itunes backup and when we hit setup as new ipod and click next it comes up with sign in with apple id or create a free apple id we clicked create a free apple id....then comes up with bday,1st name last name, use your current email address, get a free icloud email address or change email address and THIS is where we have problems....if we hit change email address it means that sis's stuff goes under his name and moves all her stuff to this older ipod which the brother does not want. sorry this is so long but its the only way I knew to do it.
-
Hi, I'm having trouble saving the documents when merging in Preview. I don't have any problems merging the pdf documents by dragging them in preview, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I've tried save and export, but none merge the documents after saving... how can I create the file (with all the pdf files) after merging?
That's a comment in the file. It has no effect at all.
-
Error creating sdo_pc point cloud: "ORA-02289: sequence does not exist"
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0
I've come across a problem when creating point clouds - every so often I'll get an error about a sequence not existing.
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: DROP SEQUENCE "MDPCS_a_17745$$$"
ORA-29400: data cartridge error
ORA-02289: sequence does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 171
ORA-06512: at "MDSYS.SDO_PC_PKG", line 179
ORA-06512: at line 17
I've got a test case which creates a table where we'll put a sdo_pc, a block table and then a loading XYZ table. We then loop a bunch of times and create a PC for each.
Test case setup:
create table pc_test (
id integer primary key,
pc sdo_pc);
create sequence pc_test_id;
create table pc_test_blocks as select * from mdsys.sdo_pc_blk_table;
create table xyz (
rid number,
val_d1 number,
val_d2 number,
val_d3 number);
insert /*+ append */ into xyz (
select
rownum,
round(dbms_random.value(1,10000),2),
round(dbms_random.value(1,10000),2),
round(dbms_random.value(20,50),2)
from dual
connect by level <= 1000);
commit;
Run test case:
declare
l_pc sdo_pc;
l_id pls_integer;
begin
for i in 1..50 loop
l_pc := sdo_pc_pkg.init(
'PC_TEST', 'PC', 'PC_TEST_BLOCKS', 'blk_capacity=500',
sdo_geometry(2003, 2157, NULL, sdo_elem_info_array(1,1003,3), sdo_ordinate_array(400000, 500000, 800000, 1000000)),
0.005, 3, null);
l_id := pc_test_id.nextval;
dbms_output.put_line('PC_TEST id=' || l_id);
insert into pc_test (id, pc) values (l_id, l_pc);
sdo_pc_pkg.create_pc(l_pc, 'XYZ');
end loop;
end;
Some of the PCs will create, but eventually it'll blow up with
ORA-02289: sequence does not exist
In so far as I can tell, once I call sdo_pc_pkg.create_pc(), Oracle is creating a sequence with a name such as MDPCS_a_1751F$$$. When it is done creating the blocks, it then tries to drop the sequence. However the statement to drop the sequence is wrapped in double quotes - so if the sequence name contained any lowercase letters then it will error out when trying to drop it. The values used between the underscores seem to be hexadecimal - sometimes they're numbers only, sometimes numbers and uppercase letters, sometimes numbers and lowercase letters.
Has anybody else come across this issue?
The issue isn't critical as the PC blocks do seem to be created correctly, so the issues are: (a) my pl/sql block errors out and (b) I'm left with sequences lying around.
For the former I'll catch the exception and ignore it, for the latter I'll just drop the sequences myself afterwards.I tried the test on 11.2.0.4. On that release I get an error during a rename:
ERROR at line 1:
ORA-13199: Invalid Parameters for Partition_Table
ORA-13199: Invalid Parameters for Partition_Table
ORA-13249: Stmt-Execute Failure: RENAME "MDPCI_a_26062$$$" TO "M3_A_26062$$"
ORA-29400: data cartridge error
ORA-04043: object MDPCI_a_26062$$$ does not exist
ORA-06512: at "MDSYS.PRVT_PC", line 3
ORA-06512: at "MDSYS.PRVT_PC", line 157
ORA-06512: at "MDSYS.SDO_PC_PKG", line 74
ORA-06512: at line 17 -
Error while creating folder: Path is invalid because folder does not exist
Hi,
I am having an issue while creating Folders in ID, when I create folder Structure like EDI -> VENDOR -> DELL I am getting the error as below:
Path /EDI/VENDOR/DELL/ is invalid because folder VENDOR does not exist
So first 2 levels of folder structure is fine and when I create third level (DELL) I get the above error. Any idea how to resolve this or is this the limitation?
We have
Service Pack:06
Release:NW711_06_REL
Thanks,
LaxmanHi Laxman,
Kindly try to refresh the SLD cache by going to Environment -> Clear SLD Data Cache. Make sure that the Cache Status are all in green.
Hope this would help.
Regards,
Jenny -
I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.
I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option? -
Error After creating 2 new wagetypes.0015 40 00E7 does not exist in T512Z
Hi Experts,
I have created 2 new wagetypes.They are properly transported to Quality server.
And the amount is calculting correctly in Qual server for infotype 0015.Basis guys has transported that request to production server.
Now i am unable to find the wagetypes which i have created.When i go to pa30 and select 0015 Infotype and subtype 00E7 ,it is saying that specified subtype is invalid.When i try to create it is giving message that 0015 40 00E7 does not exist in T512Z-Check your entry.Really there is no particular wagetypes in that table.But in Quality they were there.
What could be the problem.What can i do to appear those wagetypes in Production Sysytem.
Please advice me to resolve the issue.
Thanking You.
Sai.
RegDear Vicky,
If you have this entry in Q system it should be request transfer issue. I have such a cases sometimes.
I recommend go to D system, delete the record from V_T512Z and save the table. System will ask you to create a new request. Create it and put your changes into. Go out of table and come back and create the same record into it save your changes.
Release your request and transfer it again to Q and P. Hope to see the record in P system.
Otherwise do the method Okan recommended thru SM30. It works also but sometimes recreating the records are the only solution as I know
Regards,
Omid -
How do I create an executable for a computer that does not have IVI drivers
I'm creating an executable driver (based on the NI drivers) for a TDS 3054 intended for a computer that does not have the IVI engine. I would prefer to install as little software on this computer as possible. Is it possible for me to build the driver with the appropriate support DLL's without installing IVI on the user's computer? How do I do this?
Thank you,
Zach ObermanZach,
Since the tkds30xx driver you are using is IVI based, you will not be able to use it without the IVI Engine.
If you must build an executable that does not require the IVI Engine, then you will need to use a traditional LabVIEW driver or convert a VXIpnp driver into LabVIEW. Neither of those drivers would require the IVI Engine.
At this time the only TDS 3054 driver on NI's IDNet website is the IVI-based tkds30xx driver.
You may be able to obtain a traditional LabVIEW driver from
Tektronix
Developer Exchange
Requesting a
driver
Other Resources
Thanks,
--Bankim -
Attempt to create a transformation results in error "transf. does not exist
Hello,
We're using BI 7.0 in my dept. I have a Data Store Object that I want to connect with a transformation to my DataSource. All objects are BI 7.0 objects, not 3.x. I right click my DataSource and select "create transformation" - as described in the BI documentation. I enter my DSO object as destination in the pop-up. As soon as I click on "execute" to confirm all entries in the pop-up, I get the error message "transformation does not exist, see long text". In the long text I find "The transformation specified by transformation ID , source and target , does not exist.". Well - of course my transformation doesn't exist yet, I wanted to create it! Does anyone share my unfortunate experience and found a way out?
Thanks for any tips you can give me! Annettehi annette,
this is 1 of the possibility. i replicated the issue in my system and this is what i found out...
when you or whoever replicated the system (r/3 system connected with bw) he/she must have replicated the datasource as a 3x version and NOT as a 7x version. if that's the case, then you must have infosource inbetween (as 3x object you can't connect directly with datasource) and update rules (no transformation works). if that's what happened... then system will not allow you to create a transformation and will give you that error message. so please check if the datasource from r/3 got replicated properly (you have 2 options... replicate as 3x object OR replicate as datasource object 7x)
hope this helps...
regards,
sameer -
PLSQL - Creating a cursor for a table that does not exist
I am writing my first PLSQL program, and I have run into a problem creating a cursor.
I have a cursor that accesses a table on another database via a database link. The database link does not yet exist, so the first thing that my PLSQL does is create the database link. The problem is that I have to define my cursor before I have executed the code for the database link, and the compiler gives me an error for referring to a table that does not yet exist. How can I get around this?
Here is the basic structure of my program
DECLARE
--cursor defined here
BEGIN
--code creates database link if it does not yet exist
--code executes cursor
ENDI'm still not sure I understand why the database link can't be created in advance... Once you run your code once, the database link is going to exist permanently. Why not just create it at compile time like every other object in your application?
It's sort of like trying to create a table at runtime-- if you do that, you can't refer to that table in static SQL later on. You can do everything with dynamic SQL, but that's going to substantially increase the complexity of your code.
Additionally, you have to have the CREATE DATABASE LINK privilege granted directly to the user running your code, not through a role, which seems like a huge security hole.
Justin -
Trying to create Managed Server service in Win 2003 does not work
Hello ... I've created an AdminServer service with no problems:
SETLOCAL
set DOMAIN_NAME=ClassicDomain
set USERDOMAIN_HOME=D:\Apps\Middleware\user_projects\domains\ClassicDomain
set SERVER_NAME=AdminServer
set PRODUCTION_MODE=true
set MEM_ARGS=-Xms256m -Xmx512m
call "D:\Apps\Middleware\user_projects\domains\ClassicDomain\bin\setDomainEnv.cmd"
call "D:\Apps\Middleware\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
I can get the AdminServer to start and get into the Admin Console.
I'm trying to create a service for the WLS_Forms Managed Server and can create the service, which does start ... but it does not start my WLS_Forms Managed Server:
SETLOCAL
set DOMAIN_NAME=ClassicDomain
set USERDOMAIN_HOME=D:\Apps\Middleware\user_projects\domains\ClassicDomain
set SERVER_NAME=WLS_Forms
set PRODUCTION_MODE=true
set
JAVA_OPTIONS=-Dweblogic.Stdout="D:\Apps\Middleware\user_projects\domains\ClassicDomain\stdout.txt" -Dweblogic.Stderr="D:\Apps\Middleware\user_projects\domains\ClassicDomain\stderr.txt"
set ADMIN_URL=http://localhost:7001
set MEM_ARGS=-Xms1024m -Xmx1024m
call "D:\Apps\Middleware\wlserver_10.3\server\bin\installSvc.cmd"
ENDLOCAL
Both services/servers reside on the same box.
Can someone lend a hand and indicate what is failing?
ThanksThat is not typically the case since you could normally also use a start script like:
<DOMAIN_HOME>/bin/startManagedServer(.sh/.cmd) managedServerName
One thing to note is that Node Manager is the mechanism by which the Admin Console is able to start the managed servers. The Admin Server has not mechanism to do this directly, it is indirectly done via Node Manager.
You should ask in the Forms / Reports forum for how that product is typically started with WebLogic in 11g.
Forms -
When I create a video, the music in the background does not come through
When I am creating a video of my kids dancing to music on my phone and I upload it to Facebook or email it, the music is barely there, so low you cannot even tell what it is, and the rest is the right sound level. What is going on?? Never had this problem before???
I am playing a concert on the TV and they are watching and dancing to it. When I play it on my phone, I can hear the music clear as day and loud. But when I upload it to Facebook it is barely there. I also tried emailing it to myself and watching it. Again, barely even there. However, there are other sounds in the background that are very loud, like a child banging blocks to the beat like a drummer. I cannot figure out what is going on.
So, to simply answer your question, it is in the background, not added seperately. =)
Maybe you are looking for
-
Gaps in financial year variant periods IW
Hi All, how to fill the Gaps in financial year variant periods IW. i am not able to finish these!!! we have 52 weeks, when i am posted i am facing the above error. thanks and regards Prathap
-
Exporting an events file to a CD looses sequence
I have an event file of several hundred photos of a new puppy and his first five months. I selected, sized and exported all photos (sequenced by date in the event folder) onto a CD. Before burning, I spot checked the exported photos. They were comple
-
How to view my contact on the other end
I can't seem to see the video of my contact but he can see me on his end. Need help, please.
-
Can't update photos using iPhoto 6 - read/write permissions
Help! Before you think this is the standard "iPhoto 6 permissions problem", please read on. Upon installing iPhoto 6 and attempting to update my iPhoto Library, I get the dreaded "There is a problem accessing...files in your iPhoto Library folder...M
-
2 Java ME Web Service Errors of "Not Compliant with JSR-172"
This happened when I use Microsoft's ASMX-based WSDL file on a Java ME WS client. Say I had a test.asmx WSDL. Then I use NetBeans, and I go to New > Java ME Web Service Client I tried to import from running web service, URL "http://www.testhost.com/w