I'd like to build an SOE - where should I start ?

Hello all,
I've not had to do this before, usually my supplier does the SOE's, but I would like to build my own with 10.4, all my apps and settings that I would like to have.
Where do I start ? I'm thinking I'll have to have a hard drive to install onto and the install the apps etc and after all done then make disk image from that ? What I would like is to then use that disk image for a netboot install...
Anyone done this and can offer advice?
Mitch

Not guite solved but probably too many variables !!!
Kappy... we say Merry Christmas down here (Melbourne, Australia)...
But may I wish you and your family a Happy and Safe Holiday time !
Kappy - Thank YOU for providing so much help on these Discussions, I don't get much time anymore - it's called 4Year Olds and 6 Year Olds.
KAPPY HOLIDAYS ! - Yes you can use that !
Mitch from Melbourne

Similar Messages

  • I want to learn editing in photoshop, from where should I start?

    I want to learn editing in photoshop, from where should I start?

    Jon has sent you to the right place, but I prefer a slight change to the location
    http://tv.adobe.com/show/learn-photoshop-cc/
    Perhaps start with Jon's page because it focuses on novice users, but the list in my link will let you chose things specific to your requirements.  I always think it is good to learn the things you will use over and over, because Photoshop is definitely a Use it or Lose it kind of application.
    Good luck and have fun. 

  • Illustrator Cs5 will not open.  Recently upgraded hard Drive and upgraded to Maverick OS 10.9.3.  Where should I start troubleshooting?

    Illustrator Cs5 will not open.  Recently upgraded hard drive and upgraded to Maverick OS 10.9.3.  Where should I start troubleshooting?

    gj,
    Unless it has worked since the upgrading, I believe you should uninstall, run the Cleaner Tool, and reinstall.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Where should I start to import my table of data to FLA?

    Good Morning,
    I am  cartographer/graphics specialist by trade but am working to apply  these  skills to flash.  I've had great luck so far moving my projects  out of  Illy and making them interactive through AS3. 
    I am at the point where I'd  like to incorporate tables of attribute  data specific to my movie  clips.  For example, tables of demographic  info specific to US  counties.  I'd like to make these data queriable by  clicking on a  specific county (mc).  I've been reading some tutorials  and it sounds  like I should convert my data to xml (from a CSV or XLS)  and then import  the XML to my stage and start learning the ins/outs of  calling on its  values. 
    Am  I starting down the right path?  First off, I've not found a very   straightforward way to get my data into XML.  It originates in a DBF and   i could easily convert it to tab-del text, csv or anything else.  Any   suggestions? 
    Also,  should i rethink where I am starting with this and not use XML   altogether, maybe using something else? 
    thanks in advance.... 
    -josh

    for relatively simple data using an xml file is the way to proceed.  for more complex (or extensive) data, using a sql database is the way to proceed.

  • Where should I start learning

    Hello!
    I am very new to appdev. I am keen to develop in this field.
    Where should I
    begin!!! Please advice some beginners guide or pointer.
    Reg
    Dhananjey

    Start with a solid foundation in HTML and CSS.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Dhananjey Singh" <[email protected]> wrote in
    message
    news:f21re3$jhb$[email protected]..
    > Hello!
    >
    > I am very new to appdev. I am keen to develop in this
    field. Where should
    > I begin!!! Please advice some beginners guide or
    pointer.
    > Reg
    > Dhananjey
    >

  • If I wanted to learn about Web Services where should I start?

    I want to start taking classes, but I'm not sure where to start. I know how to write java programs, but probably more on the level of a school project and simple programs. Is that enough for Web Services or should I take a class before a Web Services class?

    Check out JAX-WS at http://jax-ws.dev.java.net. Specifically, check out the Articles under the Documentation section of the page. Bobby has written a very good white paper to get you started.

  • Where should I start

    I have a brochure page in portrait format done in Illustrator.  There is a series of photos in the form of a film strip that I want to transition across the top of the site as with Flash.  I also want to add an interactive 3D window to the website.  Obviously the whole page will not show at one time.  What path should I take to build what I want?  I have the Adobe Creative Suite 4 Production Premium suite.
    Thanks,
    Randy Van Nostrand
    [email protected]

    I think you will need to start with dreamweaver and then flash ...

  • Where should I start from to use HP4145B with LabView?

    I am not familiar with LabView, but I have to set up LabView to make it work with HP4145B.
    I downloaded the driver from NI, placed it at the correct directory, and can see VI's in function palette.
    Also, when I run MAX, it shows "Instrument 0" under GPIB0.
    When I click on "Scan for Instrument", it says something about IDN query, but now I know HP4145B is too old to understand IDN query.
    I saw a lot of posts that say they can write to the instrument but cannot read.
    However, I don't even know how to test whether my labview can write to 4145B or not.
    My questions are....
    1. 4145B manual says it has "ID"  code.
    I tried testing it by using "Interactive Control"
    And I got this by NI Spy
    1.  ibsic(GPIB0)
    Process ID: 0x00000C1C         Thread ID: 0x00000EB4
    Start Time: 15:23:22.485       Duration 00:00:00.000
    ibsta: 0x160       iberr: 0             ibcntl: 0(0x0)
    2.  ibsre(GPIB0, 1)
    Process ID: 0x00000C1C         Thread ID: 0x00000EB4
    Start Time: 15:23:26.070       Duration 00:00:00.000
    ibsta: 0x160       iberr: 1             ibcntl: 0(0x0)
    3.  ibcmd(GPIB0, "@?1", 3 (0x3))
    Process ID: 0x00000C1C         Thread ID: 0x00000EB4
    Start Time: 15:24:18.606       Duration 00:00:00.000
    ibsta: 0x178       iberr: 0             ibcntl: 3(0x3)
    4.  ibwrt(GPIB0, "ID", 2 (0x2))
    Process ID: 0x00000C1C         Thread ID: 0x00000EB4
    Start Time: 15:24:30.242       Duration 00:00:00.010
    ibsta: 0x168       iberr: 0             ibcntl: 2(0x2)
    5.  ibcmd(GPIB0, "? Q", 3 (0x3))
    Process ID: 0x00000C1C         Thread ID: 0x00000EB4
    Start Time: 15:25:12.333       Duration 00:00:00.010
    ibsta: 0x174       iberr: 0             ibcntl: 3(0x3)
    > 6.  ibrd(GPIB0, "", 20 (0x14))
    > Process ID: 0x00000C1C         Thread ID: 0x00000EB4
    > Start Time: 15:25:23.289       Duration 00:00:16.784
    > ibsta: 0xc164       iberr: 6             ibcntl: 0(0x0)
    There are four LED's on the front panel of HP4145B.
    It shows status of HP4145B whether it is talker or listener.
    LED changes properly to my command. (So I don't think there is any problem with harware connection)
    But, I still get nothing but EABO error when I want to read something.
    What am I doing wrong?
    How can I test "ID" code?
    (I do not have ultra-fast typing speed so I think I gave 4145 enough time to respond before I typed new command)
    2. I tried to use driver I downloaded from NI.
    Other posts say that people used "HP 4145 Example.vi" for testing.
    However when I put "HP 4145 Example.vi" on the block diagram, I cannot run it.
    How do I test with "HP 4145 Examble.vi"?
    3. I tried testing other vi's such as "HP 4145 source setup.vi".
    I put that vi on the block diagram window, added constant of 17 to GPIB address,
    and other constants to other inputs and run it.
    A new window popped up, so I ran it again.
    However it does not seem to work since I see no change when I go into source set up menu directly from HP4145 front panel.
    Again, LED indicator changes to LTN(which means HP4145B is in listener mode) when I run vi.
    What would be the problem?
    I'm experiencing a lot of trouble with this HP4145B, and I know too little to solve this by myself.
    Somebody please help me with this.
    Thanks in advance.

    My 4145b uses address 17.
    I checked switch setting on the backpanel of 4145b and CRT on the front panel says "HPIB(17, COMMA, EOI)". Also, when I change address to 16 and execute vi file, it gives me an error message of "HP 4145 Define Channel; HP 4145 Send Message"
    When I change back to 17 and execute, error message disappears(and no more error message comes in when I send command to 4145b), but nothing happens on 4145b.
    As I said eariler, LEDs on 4145b seems to be saying that 4145b understands basic command such as "change to listener" or "change to talker".
    In addition, when I try to read from 4145b from "HP4145 example.vi", for example by clicking on "Display Graphics and Plot" and execute, I get error message "HP 4145 Take Measurement; Wait for Interrrupt (GPIB)". However, reading is not the problem to think right now because I don't even know how to read.
    I have Newport 1830-C with me, and I checked this instrument with same GPIB-USB-HS and same PC I am using with HP4145b.
    It works with 1830C. Therefore, it doesn't look like there is something wrong with  my PC and GPIB-USB-HS.
    Anyway, thank you for your attention.
    메시지가 06-25-2008 01:28 AM에 Min Yoon에 의해 편집되었음
    메시지가 06-25-2008 01:36 AM에 Min Yoon에 의해 편집되었음

  • I want to learn Oracle VM: where should I start from ?

    Hi all,
    I am an Oracle dba ( OCP ) interested in learning how to setup and manage Oracle VM.
    I'm looking for advices about where to start from : I didn't find any book about Oracle VM in the Oracle Press catalogue and I'm not going to start my learning path with a LVC .
    I'd prefer to start with a reliable book and some tutorials to have a first glance at it, so any suggestion would be appreciated
    Thanks,
    Andrea

    There a couple of youtube videos work a look ....
    http://www.youtube.com/watch?v=BzhVhGhIuxY ... and ohers.
    And dont forget the obious ... the oracle on-line documentation itself ...
    From http://docs.oracle.com driling down to http://download.oracle.com/docs/cd/E15458_01/index.htm ( for for 2.2 )
    http://www.oracle.com/us/technologies/virtualization/index.html
    http://www.oracle.com/us/technologies/virtualization/oraclevm/index.html
    You may also need to get yourself some kit for a lab to practice on .... some processors and motherboards will do better than others ... more ram and disk is good!

  • I won't to become a developer where should a start

    i wont to start being a developer

    Apple Developer Program
    https://developer.apple.com/programs/ios/
    https://developer.apple.com/programs/mac/
    https://developer.apple.com/programs/safari/
    Best.

  • Where should I place my preloaders?

    Hi all,
    Would like to seek advice on where should I place the
    preloaders.
    I have a banner swf, menu swf, main content swf, and intro
    swf. where should i load the preloader? on the main MC that will be
    calling these swf? or each swf have their own preloader? that would
    look rather weird.
    Of should I just merged banner, menu, main content and intro
    altogether? How do i do that? I am lost as to should I separate
    them out or put all eggs in 1 nest. My main content will have
    transitions between each sections.
    since my menu is separate from the main content, how do I
    point them to get the main content to change section whenever user
    click on 1 sections?
    I am so lost. Please advise. Thanks

    Hey X, sorry I haven't responded of late, working elsewhere.
    Let me address some of the questions you've had above.
    1) I'm very sorry, I see that I missed that assignment when I
    typed this out, within the loadFile function the correct call
    should be: mcl.loadClip(src, clip);
    2)the code is AS2, and yes it is legal coding. first, we're
    setting up parameters for our function here, and then we pass them
    this information when we call the method that we've set up, so that
    we can 'feed' information to the function that then uses it to
    perform it's job. the variable declarations in this case here are
    called 'strict typing' (ie. src:String, file:String, ...) and it's
    just a way to define variables of a particular 'type', it isn't
    necessary to follow the variable names with the type declaration,
    but I thought that I would include it here so that it made sense to
    you and so that you could see what type of variables need to be
    passed to the function. the varaibles MUST be passed to the
    function in the order that they are listed.
    3) yes you've got this all right :) The onLoadInit handler
    fires when the loaded clip becomes instantiated on the timeline
    (eg. available), previous to this point you could NOT say something
    like 'clip.gotoAndPlay(10);' because the loading clip was not yet
    available for the call, and it would fail. So you can use this
    handler to tell the loaded clip to 'do something' if you need this
    type of functionality, like say for instance that you need the
    loaded swf to go to a certain 'page' depending on what button the
    user pressed, this handler would be a way for you to pass that
    informtion along, and tell the loaded clip to goto the correct
    position, handy ;)
    As to the last question in 3, I touched on that above, my bad
    4) I was just talking about the name of the swf file being
    called 'dummy'.
    5) No, put everything in frame one, but on a different
    layers. Place your preloader on the top layer, and the 'blank' MCs
    (to load into) on layers below.
    OK, on to your last post.
    Yes, the way it's set up here the preload bar would run to
    100% for each load and then start again for the next one, it also
    has a text instance that tells the use what is being loaded each
    time. This could all be changed, and you can certainly use you own
    preloader instance, however you will need to reconstruct the method
    that is handling the progress. See if you wanted ALL of the
    instance your loading to equal 100% of your loader bars progress
    (for the first load anyway) you can't calculate the total bytes of
    all files previous to initiating the load, so you have a problem
    here. One method might be to 'break up' the load and apportion the
    progress indicator evenly for each item needed in the intital site
    loading. what I mean by that is, if you have 4 items that are
    needed to load, then each item would 'move' the progress bar by
    25%, so that when 100% of the first item is loaded, the progress
    bar is revealed by 25%, then the second load reveals 50%, and so
    on. It will just take a little math to change the code to handle
    the progressions. Now I would suggest that you NOT animate the
    masking rectangle by frames, I would do this with code adjusting
    the _x position of the mask by an amount that has been calculated
    with the loading code. also this method will have to accomidate,
    both multi-loads and singlular loads so you'll need to use another
    parameter to define how the preload indicator progress is 'broken'
    and into how many parts. This would end up in the math that defines
    the system that controls the indicator.
    OK this should be enough for you to think about for now
    :)

  • How to build an app where I have virtual 3x5 cards the user can fill in and move around on screen

    Hi ColdFusion Guru's,
    Can you point me in a good direction for this project?
    I want to build an app where the user will have a deck of 3 by 5 cards on the screen.
    The user will type in some data on each 3x5 card and then drag it to a location on the screen.
    The user needs to be able to flip through the deck of cards and lay them out on the screen.
    There will be a SQL database bihind it to store the data and position of the cards.
    I'm thinking there must be some sort of existing app I can build on.
    Is this ColdFusion or Ajax or what.
    Thx
    Mike

    I imagine the final version of this will be a combination of ColdFusion and alot of JavaScript.
    I imagine you'll use CF to handle simple stuff like communicating with your database (getting/saving/etc.), and then utilize a bunch of JavaScript to manage the client-side interactions of drag-n-drop, sorting, positing, etc.
    And to minimize annoying page refreshes, I suggest you'll want to use a lot of AJAX to help with continually tracking and saving card positions, content, etc.
    I don't really know of anything out there that could provide a base for this specific of a project, but at the very least you'll definitely want to get yourself a good JavaScript library (jQuery, ExtJS, mooTools, etc.) that can help with the drag-n-drop and other client interaction stuff.
    Also, you'll definitely want to carefully plot out how all the peices of this need to work together.  Otherwise, you'll end up with a pile of CF/JS/HTML/CSS spaghetti that will be impossible to manage, much less expand upon in the future.

  • A Game like TrackMania: build to race for the Mac or PC

    Hey I've been searching the internet like crazy for a game where you build your own race tracks and than you get to play it. I don't care if it is only for the PC or the Mac as long as it is for one of the two. However a game compatible with the mac will be better
    Thanks in Advance

    First, it's unlikely any suitable paint program will scan. For scanning you will need to use Image Capture or the scanning software that came with the scanner.
    PaintBrush is supposedly the closest you will find to MS Paint, but you can look for others by searching at VersionTracker or MacUpdate.

  • There are sites like Amazon, Facebook and pages where I need to put info on that don't totally show all the points. How can I get them to show up? I usually have to guess

    There are sites like Amazon, Facebook and pages where I need to put info like name, address, etc, that don't show where 'next' or 'skip' or 'continue' are. There is just alot of space. When I move my cursor around I have to guess if it's the right one and click

    For some ways around this see [http://kb.mozillazine.org/User_name_and_password_not_remembered User name and password not remembered - MozillaZine Knowledge Base]
    Another option is the [https://addons.mozilla.org/en-US/firefox/addon/60265/ Saved Password Editor] add-oin which allows you to add passwords for sites that disable password saving.

  • Hiya, i would like to make an  image where the subject looks ghostly- half transparent etc. How can i do this on PSE 12?

    Hiya, i would like to make an  image where the subject looks ghostly- half transparent etc. How can i do this on PSE 12?...........also, perhaps to create a " then and now" type of picture, a modern view with a view of the past superimposed in.
    Thanks.

    Hi libbydibby,
    Please refer to the given link:- https://forums.adobe.com/message/4745994
    Let me know if further assistance requires.
    Sarika

Maybe you are looking for