Where should I start

I have a brochure page in portrait format done in Illustrator. There is a series of photos in the form of a film strip that I want to transition across the top of the site as with Flash. I also want to add an interactive 3D window to the website. Obviously the whole page will not show at one time. What path should I take to build what I want? I have the Adobe Creative Suite 4 Production Premium suite.
Thanks,
Randy Van Nostrand
[email protected]

I think you will need to start with dreamweaver and then flash ...

Similar Messages

I want to learn editing in photoshop, from where should I start?

I want to learn editing in photoshop, from where should I start?

Jon has sent you to the right place, but I prefer a slight change to the location
http://tv.adobe.com/show/learn-photoshop-cc/
Perhaps start with Jon's page because it focuses on novice users, but the list in my link will let you chose things specific to your requirements. I always think it is good to learn the things you will use over and over, because Photoshop is definitely a Use it or Lose it kind of application.
Good luck and have fun.

Illustrator Cs5 will not open. Recently upgraded hard Drive and upgraded to Maverick OS 10.9.3. Where should I start troubleshooting?

Illustrator Cs5 will not open. Recently upgraded hard drive and upgraded to Maverick OS 10.9.3. Where should I start troubleshooting?

gj,
Unless it has worked since the upgrading, I believe you should uninstall, run the Cleaner Tool, and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Where should I start to import my table of data to FLA?

Good Morning,
I am cartographer/graphics specialist by trade but am working to apply these skills to flash. I've had great luck so far moving my projects out of Illy and making them interactive through AS3.
I am at the point where I'd like to incorporate tables of attribute data specific to my movie clips. For example, tables of demographic info specific to US counties. I'd like to make these data queriable by clicking on a specific county (mc). I've been reading some tutorials and it sounds like I should convert my data to xml (from a CSV or XLS) and then import the XML to my stage and start learning the ins/outs of calling on its values.
Am I starting down the right path? First off, I've not found a very straightforward way to get my data into XML. It originates in a DBF and i could easily convert it to tab-del text, csv or anything else. Any suggestions?
Also, should i rethink where I am starting with this and not use XML altogether, maybe using something else?
thanks in advance....
-josh

for relatively simple data using an xml file is the way to proceed. for more complex (or extensive) data, using a sql database is the way to proceed.

Where should I start learning

Hello!
I am very new to appdev. I am keen to develop in this field.
Where should I
begin!!! Please advice some beginners guide or pointer.
Reg
Dhananjey

Start with a solid foundation in HTML and CSS.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dhananjey Singh" <[email protected]> wrote in
message
news:f21re3$jhb$[email protected]..
> Hello!
>
> I am very new to appdev. I am keen to develop in this
field. Where should
> I begin!!! Please advice some beginners guide or
pointer.
> Reg
> Dhananjey
>

I'd like to build an SOE - where should I start ?

Hello all,
I've not had to do this before, usually my supplier does the SOE's, but I would like to build my own with 10.4, all my apps and settings that I would like to have.
Where do I start ? I'm thinking I'll have to have a hard drive to install onto and the install the apps etc and after all done then make disk image from that ? What I would like is to then use that disk image for a netboot install...
Anyone done this and can offer advice?
Mitch

Not guite solved but probably too many variables !!!
Kappy... we say Merry Christmas down here (Melbourne, Australia)...
But may I wish you and your family a Happy and Safe Holiday time !
Kappy - Thank YOU for providing so much help on these Discussions, I don't get much time anymore - it's called 4Year Olds and 6 Year Olds.
KAPPY HOLIDAYS ! - Yes you can use that !
Mitch from Melbourne

If I wanted to learn about Web Services where should I start?

I want to start taking classes, but I'm not sure where to start. I know how to write java programs, but probably more on the level of a school project and simple programs. Is that enough for Web Services or should I take a class before a Web Services class?

Check out JAX-WS at http://jax-ws.dev.java.net. Specifically, check out the Articles under the Documentation section of the page. Bobby has written a very good white paper to get you started.

I want to learn Oracle VM: where should I start from ?

Hi all,
I am an Oracle dba ( OCP ) interested in learning how to setup and manage Oracle VM.
I'm looking for advices about where to start from : I didn't find any book about Oracle VM in the Oracle Press catalogue and I'm not going to start my learning path with a LVC .
I'd prefer to start with a reliable book and some tutorials to have a first glance at it, so any suggestion would be appreciated
Thanks,
Andrea

There a couple of youtube videos work a look ....
http://www.youtube.com/watch?v=BzhVhGhIuxY ... and ohers.
And dont forget the obious ... the oracle on-line documentation itself ...
From http://docs.oracle.com driling down to http://download.oracle.com/docs/cd/E15458_01/index.htm ( for for 2.2 )
http://www.oracle.com/us/technologies/virtualization/index.html
http://www.oracle.com/us/technologies/virtualization/oraclevm/index.html
You may also need to get yourself some kit for a lab to practice on .... some processors and motherboards will do better than others ... more ram and disk is good!

I won't to become a developer where should a start

i wont to start being a developer

Apple Developer Program
https://developer.apple.com/programs/ios/
https://developer.apple.com/programs/mac/
https://developer.apple.com/programs/safari/
Best.

Where should I start from to use HP4145B with LabView?

I am not familiar with LabView, but I have to set up LabView to make it work with HP4145B.
I downloaded the driver from NI, placed it at the correct directory, and can see VI's in function palette.
Also, when I run MAX, it shows "Instrument 0" under GPIB0.
When I click on "Scan for Instrument", it says something about IDN query, but now I know HP4145B is too old to understand IDN query.
I saw a lot of posts that say they can write to the instrument but cannot read.
However, I don't even know how to test whether my labview can write to 4145B or not.
My questions are....
1. 4145B manual says it has "ID" code.
I tried testing it by using "Interactive Control"
And I got this by NI Spy
1. ibsic(GPIB0)
Process ID: 0x00000C1C         Thread ID: 0x00000EB4
Start Time: 15:23:22.485       Duration 00:00:00.000
ibsta: 0x160       iberr: 0             ibcntl: 0(0x0)
2. ibsre(GPIB0, 1)
Process ID: 0x00000C1C         Thread ID: 0x00000EB4
Start Time: 15:23:26.070       Duration 00:00:00.000
ibsta: 0x160       iberr: 1             ibcntl: 0(0x0)
3. ibcmd(GPIB0, "@?1", 3 (0x3))
Process ID: 0x00000C1C         Thread ID: 0x00000EB4
Start Time: 15:24:18.606       Duration 00:00:00.000
ibsta: 0x178       iberr: 0             ibcntl: 3(0x3)
4. ibwrt(GPIB0, "ID", 2 (0x2))
Process ID: 0x00000C1C         Thread ID: 0x00000EB4
Start Time: 15:24:30.242       Duration 00:00:00.010
ibsta: 0x168       iberr: 0             ibcntl: 2(0x2)
5. ibcmd(GPIB0, "? Q", 3 (0x3))
Process ID: 0x00000C1C         Thread ID: 0x00000EB4
Start Time: 15:25:12.333       Duration 00:00:00.010
ibsta: 0x174       iberr: 0             ibcntl: 3(0x3)
> 6. ibrd(GPIB0, "", 20 (0x14))
> Process ID: 0x00000C1C         Thread ID: 0x00000EB4
> Start Time: 15:25:23.289       Duration 00:00:16.784
> ibsta: 0xc164       iberr: 6             ibcntl: 0(0x0)
There are four LED's on the front panel of HP4145B.
It shows status of HP4145B whether it is talker or listener.
LED changes properly to my command. (So I don't think there is any problem with harware connection)
But, I still get nothing but EABO error when I want to read something.
What am I doing wrong?
How can I test "ID" code?
(I do not have ultra-fast typing speed so I think I gave 4145 enough time to respond before I typed new command)
2. I tried to use driver I downloaded from NI.
Other posts say that people used "HP 4145 Example.vi" for testing.
However when I put "HP 4145 Example.vi" on the block diagram, I cannot run it.
How do I test with "HP 4145 Examble.vi"?
3. I tried testing other vi's such as "HP 4145 source setup.vi".
I put that vi on the block diagram window, added constant of 17 to GPIB address,
and other constants to other inputs and run it.
A new window popped up, so I ran it again.
However it does not seem to work since I see no change when I go into source set up menu directly from HP4145 front panel.
Again, LED indicator changes to LTN(which means HP4145B is in listener mode) when I run vi.
What would be the problem?
I'm experiencing a lot of trouble with this HP4145B, and I know too little to solve this by myself.
Somebody please help me with this.
Thanks in advance.

My 4145b uses address 17.
I checked switch setting on the backpanel of 4145b and CRT on the front panel says "HPIB(17, COMMA, EOI)". Also, when I change address to 16 and execute vi file, it gives me an error message of "HP 4145 Define Channel; HP 4145 Send Message"
When I change back to 17 and execute, error message disappears(and no more error message comes in when I send command to 4145b), but nothing happens on 4145b.
As I said eariler, LEDs on 4145b seems to be saying that 4145b understands basic command such as "change to listener" or "change to talker".
In addition, when I try to read from 4145b from "HP4145 example.vi", for example by clicking on "Display Graphics and Plot" and execute, I get error message "HP 4145 Take Measurement; Wait for Interrrupt (GPIB)". However, reading is not the problem to think right now because I don't even know how to read.
I have Newport 1830-C with me, and I checked this instrument with same GPIB-USB-HS and same PC I am using with HP4145b.
It works with 1830C. Therefore, it doesn't look like there is something wrong with my PC and GPIB-USB-HS.
Anyway, thank you for your attention.
메시지가 06-25-2008 01:28 AM에 Min Yoon에 의해 편집되었음
메시지가 06-25-2008 01:36 AM에 Min Yoon에 의해 편집되었음

Where should I change the adapter? It doesn't work from the start.

where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

Of clans but due to shortage of space i want to delete it for some days.If i delete the app and then reinstall it after a month should i start from the beginning or cont. from where i left

i use ipad mini with retina display 16gb i love playing clash of clans but due to shortage of space i want to delete it for some days.If i delete the app and then reinstall it after a month should i start from the beginning or cont. from where i left

However, I originally had the kindle app on there and when he is reinstalling it comes up with my kindle account. How do we change this?
OPen teh Kindle app.
Tap the i at bottom right then Settings > Deregister this device.
-> http://www.amazon.com/gp/help/customer/display.html?nodeId=200375710&#managedevi ces
He does not have an actual kindle so I am not sure if he would be able to create one anyways.
The Kindle app is so you do not have to use a Kindle. Yes, he can have a Kindle account and not own an actual Kindle hardware device.

Where should I to start ??

Dear all,
Where should I to start learn about SOA ? I found many terms here such as ESB, BPEL, and much more. Those technologies offer different approaches and I found no basic knowledge about this or I miss something ?
May someone give me more basic about these ?
Thanks in advance,
Hery

Hi Rakes,
You can see my blog for all the fusion related links. You can go under the heading New to SOA.
Blog URL:-
http://abhishek-soablog.blogspot.com
Cheers,
Abhi...

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

I started to download a movie for rent and lost internet connection. Now it tells me to go to my downloads but I can't find them where should I look.

Me too!!! It says check your Downloads, but unable to find Downloads...

I have just started with Logic X, having been a Logic 8 user for many years. I have some expensive plug-ins which are not being recognised by the news Logic. Where should I install them ? YoursdisillusionedbyLogic

I have some expensive plug-ins which are not being recognised by the new Logic. Where should I install them ?
I am using Mavericks OS, and I am considering transfering my choiceof DAW to Protools.
YoursdisillusionedbyLogic

Hi
LPX only supports 64bit Audio Unit plugins. You probably need to get the latest updates for all of your plugs.
Some plugs are not currently available as 64bit versions: you may want to try
http://www.soundradix.com/products/32-lives
CCT

Where should I start

Similar Messages

Maybe you are looking for