I'dd like to use LabView to attach to a CNC FTP server and download and unplad information to it. I'm using 6.i

I am trying to attach to a FTP server on a CNC machine. I have been looking for code in 6.i that I can use with out buying the internet tool kit.

Nick,
I'll bet you're having trouble because you're trying to retrieve unformatted text (i.e. not a .wav or .tdt or some other common format). In this case, I think you want to use the [text] argument on the end of the URL, as outlined in one of the KB docs.
I've attached an example that I can run here without error; it retrieves one binary (zipfile) and one textfile from the ni.com FTP site. Try it and examine what I did.
Best of luck,
John Lum
National Instruments
Attachments:
ftp.vi ‏34 KB

Similar Messages

  • I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008.

    I am trying to integrate simulink model (.mdl) file with SIT of Labview for RCP and HIL purpose. I am using Labview 8.6, Simulink 6.6 with RTW 6.6 and RTW embedded coder 4.6 ,Visual C Express 2008 and Visual C++ Express 2008. I have selected system target file as nidll.tlc,make command as make_rtw and template nidll_vs.tmf. When I try to generate .dll file I get the following error.
    Attachments:
    SITProblem.JPG ‏101 KB

    Hi,
    No . I could not solve the issue. Presently we are using microautobox (from Dspace)for doing the RCP.
    Himadri 

  • Why must I uninstall skype and download it again every time I want to use it?

    Why must I uninstall skype and download it again every time I want to use it?

    Hi Eva,
    did you use https://helpx.adobe.com/au/contact.html 'till you could see this?
    to get this phone number
    naturally with your name not mine and did you use "What are my options? >>> https://helpx.adobe.com/au/contact/what-contact-options.html"?
    Be that as it may, I'll send a message to one of the motivated and technically experienced member of the staff, who will contact you shortly, I'm sure.
    Good luck!
    Hans-Günter

  • Operating system : I'm using windows vista.  is there any way i can download and use illustrator without changing my os?

    I'm using windows vista.  is there any way i can download and use illustrator without changing my os?

    Bluegrassbarry you can download and install Illustrator CS6 from Download CS6 products.   Do you currently have a Creative Cloud Membership?  If not then I would recommend upgrading your operating system prior to subscribing.  You can find the system requirements for Creative Cloud at System requirements | Creative Cloud.

  • Can I sign into someone else's computer and download iTunes videos to transfer to my home using a memory card?

    Here's my issue. I live in an area where the fastest available internet connection is 1.5 mb/sec with a limit of 150 gb/month. I purchase tv series passes from iTunes and I have fallen behind in my downloads. My father lives about 15 minutes away from me where he has access to a much faster cable internet connection w/out the monthly limits. Would it be possible for me to sign into my iTunes account on his computer & download the programs I have waiting to be downloaded? I haven't downloaded them onto any other computer/iPhone, I am just reminded everytime I sign into iTunes that I have numerous downloads pending. They wouldn't be watched on his computer, just downloaded and moved to a usb thumb drive I would take home with me. Then I would move the files to my computer at home which is the base for my iTunes account. I already have 5 pcs linked to my iTunes account, although 3 of them no longer work & 1 is my iPhone, so I wouldn't be able to add his pc as another computer. I'm hoping that someday I will have a faster connection available with higher data limits at my home, but until that happens, I would like to be able to get the programs I have paid for so I could actually watch them. Any suggestions are appreciated. Thank you

    Use the instructions in this article to locate the purchased songs on your hard disk, and then burn the song files to a data CD; next, import the songs on your computer. The instructions in this article may also be useful. If you burn the files to an audio or MP3 CD, some quality may be lost.
    (16559)

  • Hello.  I just started using my iMac today, and I've already had a pushy intrusion from something called mackeeper.  They wouldn't stop texting me and downloading and wanted to charge me.  One of the reasons I bought Apple was because we wouldn't get this

    I called Apple support and they were very helpful.  Just concerned that my experience on my very first day was mackeeper telling me my computer was at critical levels and I needed protection.....for $90. 
    Nearly everyone I talked to asking about Apple products said they'd never experienced any spam/spy/ or intrusion....not sure what you'd call this. 
    Should I be concerned?

    MacKeeper and similar utilities are just scams that happen to use very aggressive marketing techniques. You may find that visiting certain, generally unscrupulous websites will leave persistent cookies on your system that cause these intrusive advertisements to appear more often than otherwise. Your best defense is to ignore them, don't visit unscrupulous websites, and set Safari's Preferences to block cookies and other website data "from third parties and advertisers". Find that setting in the Security pane.
    While you're there click the button "Remove All Website Data...". That will remove all cookies already present and should stop the popups. You will need to sign in again to any website for which signing in is required. If you don't want to remove all cookies then click Details... and remove only zeobit.com. For all I know MacKeeper may use others that are more obscurely named.
    Also, consider blocking pop-up windows in the Privacy pane. They are commonly used for advertisements you probably don't want. If you ever encounter a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.

  • I would like to be able to take a video from my camera and download it to several iPads for playback without using iTunes?  Possible?

    I am taking a video for high school and would like to be able to download on multiple iPads without using iTunes.  Is there an app that would aid me in doing this?

    If you have the Apple Camera Connection Kit (CCK) and the video that your camera generates is in one of the formats tha the iPad supports then you can directly move it to the iPad with a USB connection.
    See: Apple iPad Camera Connection Kit

  • Using LabView to run VB program with parameters

    Hi,
    It's my first message here so I hope I am doing things correctly. I tried to do some research before asking and I found a lot of good informations but right now, I seem to be stuck.
    I am quite new to LabView, I did few VIs here and there but nothing really "serious". I am currently working on a LabView interface that deals with VB, Excel macros and Data extraction from Text file.
    The VB program is in charge of a motor position, then, some Excel macros are used to do some measurement and the results are written in a text file that I use to plot some graphs.
    The VB program I made give the window I put in the picture in the attached files. Basically, you have to enter some values in those TextBox then click on Move and the motor will move. When you click on the button Home, the motor moves back to the position "0", no need of the two TextBox. In my labview interface, I created two ComboBox that contain all the possible values for both of the TextBox of my VB program. What I would like to do, when I click on my "Measure" button on LabView that initiates the VB program, is that it can fill the two TextBox from VB with the data entered in my LabView ComboBox and then run the program, simulating a "click" on the Move button.
    Right now, I found a VI (included in the attached files) that runs my VB program from LabView (I use it as a Sub-VI) but I still have to manually put the values in my VB program. My goal would be that when I click on my LabView button to start my measure, the motor moves but the VB program doesn't show up for the user to manually enter the values he wants.
    I hope I was clear but if you need any clarification.
    I did the the VB program myself.
    I can also link the LabView interface I already created if need be.
    Thanks for your help,
    Baptiste
    Attachments:
    Moteur.png ‏5 KB
    lancerEXE.vi ‏9 KB

    First, thank you for your answers.
    I know that I don't need to use VB or LabView. I just want for myself to be able to use LabView to manage a program in VB, one in VBA and use data from a text file. I know I could write everything in VBA and that would get the job done. The thing is I want to get away from VBA and Excel as much as I can. In the future, the plan would be to re-write my VBA program with LabView but as of now, I just want to use LabView to manage everything. I know I don't really need it but I want to learn how to do it and have something that works.
    So I would like to know if there is way to do what I wish to do, running my VB program with parameters coming from LabView.
    Thanks

  • How to skip dialogue box which ask you to confirm the operation when your used labview to send an e-mail from Outlook?

    I'm using Labview to send an e-mail from outlook and everytime I got a dialogue box which inform that a software is trying to send an e-mail. To send this e-mail I have to confirm operation. How can I avoid this dialogue box ?

    I don't know what code you're using but the attached VI works with my version of Outlook and doesn't have any pop-up messages. I downloaded it from somewhere a while ago but don't remember where it was from.
    Attachments:
    Email_sender.vi ‏54 KB

  • Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

    Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
    The data is being received at 1Mbps.
    Thanks

    Two questions:
    One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
    Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

  • Calling and using LabVIEW VI's in a C# application : user manual ?

    Hi everyone,
    I am working on a project (actually a proof of concept) where I need to call and use LabVIEW VI's in a C# application.
    I downloaded the example available on this page : Calling LabVIEW VIs from Other Programming Languages.
    This example (joined) is working fine, but I would like to know if there is an associated documentation concerning the .NET classes that I can use in C# when I use the namespace "LabVIEW" (using LabVIEW; in C#).
    I need to know a little more about the properties and methods that are available (what it does and how to use it).
    I looked for it on NI's website and the LabVIEW help but could not manage to find anything interesting.
    Is there an official documentation released ? How can I get those informations ?
    Thanks for your answer(s).
    Regards,
    Da Helmut
    Attachments:
    CallingLabVIEWFromCSharpUsingActiveX.zip ‏114 KB

    Hi,
    The class browser is usefull (ctrl + shift + b), but I am not developing the C# application on the same computer than the LabVIEW application.
    The *.chm file has all the informations in it but I am not finding it well organized. I am drowning in all the informations. I supposed there was a specific help file / manual for the ActiveX methods and properties (a kind of hierarchical view like in the class browser).
    Also I supposed that there were different methods and properties that the one available in LabVIEW.
    For example when I browse the class in C# I get those weird methods :
    Regards,
    Da Helmut

  • Controlling pxi 7350 using labview software

    Hi,
    So i am a complete newbie when it comes to labview having only used it to control virtual instruments before and now i am the point where i want it to interact with real world items. Ok so here goes..... i have the latest labview development software and have also purchased a pxi1033 with a pxi4065 digital multimeter and a pxi 7350 motion controller integrated within.
    my problem however is that i want to be able to control my motors via the umi7772 interface but cannot seem to find the correct symbols on the labview software to utilise them, i would like to use labview to create a program that will turn the stepper and evaluate what is on the dmm and then turn accordingly this is way above my level on labview currently but if anyone has any ideas then any information is greatly appreciated.
    cheers
    james

    Hello Jamest6, 
    I have found some useful documentation that will help you get started with you 7350 and LabVIEW. 
    First of all here is a community example that you can take a look at. It is possible to download the example itself from the bottom of the page.
    Read Analog Input (AI) values from NI-Motion device 73xx : https://decibel.ni.com/content/docs/DOC-5617
    Then you can access these knowledge base articles for some more guidance : 
    How Do I Use the Digital Input/Output Lines on my 7330, 7340, or 7350 Motion Controller Card? : http://digital.ni.com/public.nsf/allkb/2D238C3BF101620C862573A60081BFFE?OpenDocument
    How do I control the analog ouputs from an NI PCI motion controller in Measurement & Automation Explorer?: http://digital.ni.com/public.nsf/allkb/04B940903BDD987C862579320083C6FF?OpenDocument
    Also using these manuals for both prducts will be of help to you : 
    NI 7330/7340/7350 Motion Controllers and
    P7000 Series Stepper Drives: 
    http://www.ni.com/pdf/manuals/372324d.pdf
    NI UMI-7774/7772 : http://www.ni.com/pdf/manuals/373359c.pdf
    Another great source for looking at or using example VIs is the  LabVIEW's Example Finder.  Go to Help » Find Examples... When that window pops ups, double-click Toolkits & Modules in the folder list, then double-click NI Motion Assistant.  I'm guessing the "Straight Line Move.vi" or "Blended Move.vi" would be most helpful to you, but you could read the descriptions of each example listed for a little bit more information about what the examples are doing.
    Hope these are useful! 

  • Beginner- need help to automate a device using labview

    Hi,
    I am a graduate student pursuing my masters in mechanical engineering. I have been asked to work on a project that involves automating a gas plasma surface cleaner using labview. Since i have no knowledge about electrical equipments and this is the first time i am using labview, i would need some help so that i can get started with the project. so, basically the equipment is a small box inside which surgical tools can be placed and sterilized. Once the surgical tool is placed, the door is shut manually and the glass chamber is depressurized and then injected with a hydrogen peroxide gas. Then the plasma discharge is started by switching on the equipment. It runs for about 3 minutes, and then we manually re-pressurize the chamber and open the door to take out the tool. I will have to automate this process. Please let me know how to get started in terms of integration of the equipment with labview etc and things i need to know. Also, let me know if you need more details.I could also attach a picture of the equipment if needed.
    Thanks,
    Arvind

    Arvind,
    Since you are working on your Masters degree, it is likely that you already have a Bachelors dergree or equivalent.  So I will assume that you know the basics of engineering.  I will also assume that your previous classes did not actually teach you much about design or how to manage a project (because so many engineering schools do not teach that).
    You have a statement in qualitative terms describing your project. The next thing to do is to specify in quantitative terms the parameters which are important to success of the project. Size of the box, pressures, temperatures, times, plasma densities, ...  You will also need a sequence-of-events document which includes not only the basic process but also as many possible faults and failure modes as possible.
    For example. Close the door manually. (How will the automated system know the door is shut? What will it do if the door does not shut within x seconds?) Depressurize the chamber. (To what pressure or vacuum level? How much time is allowed for this step? What if the pressure is still too high after the time limit? -- This suggests a leak.) Inject hydrogen peroxide. (How much? How will it be measured? What it the pressure/time/quantity is too high? Or too low?) ...
    What kinds of sensors or measuring equipment are needed to answer all these questions? What kinds of output signals are generated by these sensors and instruments?
    What kind of actuators or controllers are needed to perform the actions of the system? What kinds of signals do you need to generate to control these devices?
    Does this device (as medical equipment) need to meet specific regulatory requirements?  Steam sterilizers need to have certifiable measurements of the time and temperature inside the chamber.  It may be necessary to have measurements independent from those used for the automation process.
    Once you have a comprehensive specification document, then you begin to identify components, instruments, and systems which can satisfy the individual requirements. Then you figure out how to get everything to talk to everything else. That is where the programming language (which may be LabVIEW) comes in. The task of the program is to implement the communications between devices and users and to do much of the decision-making for the apparatus.
    If you are not taking a course which teaches the basics of LabVIEW, you should start with the on-line tutorials.  You can work on these while preparing the specification document.
    Lynn

  • Frequency measurement using Labview 8 and Fieldpoint FP-CTR-502 - wind speed measure

    All the information regarding this kind of application seems to be outdated, I did not find no solution or example to construct frequency measurement VIs using Labview 8
    The examples at "NI Discussion Forums :
    Most Active Hardware Boards :
    FieldPoint Family :
    Low-Frequency measurements using counter/timer" is very strange and so far the steps given seems to be usefull only do old Fieldpoint Explorer.
    I was trying to find a way to learn how to make an anemometer send its signal to a FP-CTR-502 but I have no sucess.
    I am realy very new on this Labview stuff, any help would be welcome.

    (similar thread here)
    Message Edité par Mathieu R. le 12-23-2005 02:28 PM
    .mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
    Mathieu R.  
      CTD - Certified TestStand Developer / Développeur TestStand Certifié  
      CLAD - Certified LabVIEW Associate Developer  

  • Microsoft speech SDK 5.1 voice recognition using labview

    Hello 
    My Name is Abdo
    I read your tutorial in NI
    Voice Recognition Data Acquisition
    Created on: Apr 19, 2009 6:40 PM by
    Leonardo Cordaro
    Last Modified: 
    Apr 19, 2009 8:08 PM
    by Leonardo Cordaro
    and I downloaded your Example and the Microsoft
    .NET Framework, 3.0 and SpeechSDK51.exe
    but I using Labview 8.0
    so it can not open your example
    and I want to make a simple Program in Labview 8.0 using My Voice Commands
    Let Me Explain
    I want To Control a LED Indicator in Labview 8.0 Using My Voice Command
    Such as
    when I say (LED on)        // The LED Turn On and The computer Say "LED Turned On
    when I say (LED off)       // The LED Turn Off and The computer Say "LED Turned off
    I want to know some information about this
    thanks very much
    Abdo

    Hi Abdo,
    I would recommend posting a comment on that document. The author should see your comment and respond. I am not sure about what the LabVIEW requirements are for that project.
    Jeff | LabVIEW Software Engineer

Maybe you are looking for