I downloade the new update to my ipad and it show up a bubble it said connect to itunes

please help me

Hi Melanie ...
Use Recovery Mode >  If you can't update or restore your iPhone, iPad, or iPod touch

Similar Messages

  • I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    I downloaded the latest update for my ipad and now it won't open.  the screen shows the itunes icon and a pic of the usb cable

    That message means that you have to restore the iOS software because something went wrong. Follow the instructions here. I hope that you have a backup.
    iTunes: Restoring iOS software - Support - Apple

  • I was downloading the latest update for my ipad and now my ipad has the itunes icon and chord on the front but won't turn on or be found in my itunes or computer?

    I was attempting to download the latest update to my ipad which was to take 2 hours so i left it alone, when I came back my ipad would not turn on, now it has the itunes icon and a plug on the front, what does this mean?  And now it can't be recognized on my computer at all?
    I did a restore but nothing has happened.  How do I get it to come back on?

    You'll have to restore your iPad.  With your iPad still connected to your computer, press and hold BOTH the power and home buttons at the SAME time and your iPad will restore. 

  • If i download the new update for my ipad will it delete all my stuff?

    IF I download the new 5.1 update for my ipad will it delete all my stuff?

    what you need to do is do a backup. then download and install the update, then allow it to restore from backup. You'll lose nothing that way. Don't do a backup then you do run the risk of losing data.

  • HT4623 I installed the new update to my ipad and now it is frozen on "itunes logo plug in". Can't shut it down. What now?

    I installed the most recent update to my iPad and now it is frozen on the "itunes logo plug in" screen. It won't shut down and restart. Fixes?

    Try a Reset...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download
    Then...
    1)  Connect to iTunes on the computer you usually Sync with and Restore
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I downloaded the new software on my iPad and I can't get the iMessage to work

    I downloaded the new software and when I try to sign in to my iMessage it says the network connection isn't working it then won't let me download anything from the stores. However it let's me sign in to the iCloud and the Internet connection is fine.

    If you have updated to iOS 5 then when you want to use messages you need  register by going into settings then go to messages and  then turn it on and use your apple I tunes ID. You can only use it between other  updated devices.

  • I just tried to install a the new update for my iPad and it started but now its stuck with the apple in the window and it won't finish the update

    My iPad is stuck with the apple and the updating line but it is not finishing the update and the iPad is stuck I can't shut it off nothing is working just the bright white apple in the window.

    Hi rm44,
    Try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Home or Lock screen will display. Once the device is back up, go to Settings>General>About, and see what version is displaying. If it has the iOS number you were updating to, then you are all set.
    If it has the old iOS version number, then the update did not take place. The best thing to do in that situation is to hook the device up to iTunes on the computer you sync with, and to update via iTunes.
    Cheers,
    GB

  • After downloading the new update ios 6 for the iPad , I can not find the YouTube app

    After downloading the new update ios 6 for the iPad , I can not find the YouTube app. Is there a way to get the YouTube app back?

    It's now not part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
     Cheers, Tom

  • HT4623 I couldn't download the new software to my ipad or iphone because not enough storage so I paid the $20 for additional storage.  The purchase went thru and both phone and ipad are showing 15 GB of storage but I am still getting the message

    I couldn't download the new software onto my iPad or iphone because I didn't have enough storage.  I paid the $20 for additional storage.  Both devices are showing 15 GB of storage but both are still saying that I don't have enough storage available for the new download (3.3 GB req'd)  What else can I do?

    Delete some apps or stuff off your devices. The 'not enough storage' doesn't refer to iCloud space but space on your device.
    If you have a bunch of downloaded music from iTunes, delete it to make room, you can always redownload it after the update. If you have movies, I'd go for them first since video takes up tons more room than audio (delete less movies is the same space as lots of music)
    If you have apps you don't use, you can delete those, as long as you don't mind losing any data associated with them.

  • HT4623 after downloading the new update today my phone will not come back on, all it shows is the itune logo and a picture of the plug in, I cant receive any calls nor go to any screens. HELP

    After downloading the new update for my iphone 4 the screen only show an itune logo, as
    well as a plug in picture, thats it. No icons are visible, phone does not come on except to show
    the two icons. When I power up it does nothing except shows those 2. When power off I dont even
    get the slide off screen it just goes black. WTH?

    Hello bigboza,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • HT6058 Hello I've been downloading the new update and it's been at a stand still since it started two days aand suggestions on how to fix this issue

    Hello I've been downloading the new update and it's been at a stand still since it started two days aand suggestions on how to fix this issue

    Cancel the update and start over again. You will most likely have to restore the iPad now anyway.
    If you were using WiFi, try rebooting the iPad and see if by some miracle the download and install completes. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Try the download again.
    If that doesn't work, try using iTunes to update. But turn off your firewall and antivirus software before you update,

  • I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?

    I just downloaded the new software to my iPad but now it won't connect to the Internet. How can I fix this?

    Have you tried to reboot your router? Unplug it, count to 30, plug it back in and let it reboot. Also you may want to go into your settings on your iPad and 'reset network settings'.
    In case the update messed something up, letting the devices reboot sometimes helps.

  • On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.

    On my old iTunes sofwear iTune store would not open. I uninstalled iTunes and downloaded the new updates and installed it. Now I get a message that said " The file iTunes Libary.itl" cannot be read becouse it was created by a newer version of iTunes.I did everything it said to do inarticle HT1923 Removing and reinstalling iTunes, Quick Time, and other sofware components for Windows Vista or Windows 7. Now what?

    Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
    tt2

  • After downloading the new update for Firefox I can no longer get Firefox to respond. I can only get it to respond in safe mode. Why?

    After downloading the new update to Firefox I cannot get Firefox to respond. The only way I can use Firefox is in Safe Mode.
    == This happened ==
    Every time Firefox opened
    == I updated to new version of Firefox

    Cannot believe NO ONE from Firefox is responding to this issue; particularly since I don't seem to be the only one with the problem!!!!

  • HT4623 Iphone 4 is stuck on the connect to itunes screen after i downloaded the new update. What do i do?

    I downloaded the new update on my iphone 4 and now its stuck on a screen where it shows a usb pointing up towards the itunes symbol, and i have tried syncing my phone to itunes to finish it but itunes wont detect my phone. What do i do? Please help

    Do exactly as the image suggests, connect to iTunes and restore.
    Device not detected in iTunes for Windows

Maybe you are looking for

  • How do you Select data from two tables with similar data amd merge the output together.

    I have two Tables containing Sales Data. I want to read the Table a sort by date and accumulate dollars by order date. Then I want to read the second table and accumulate these dollar amounts by date and then merge the records together so that I gave

  • How to modify a data base table ?

    Hi,     i am working on a list output where if user is editing a field and that field need to be updated in the data base. table is a z table . the table has 5 fields . mandt       key field matnr       key field werks      key field charg       key

  • About credit card

    Hi, I had registered my credit card a week ago on Apple.and then that day  I remove all information about credit card off my apple acount.but today i learned that  2 dollars payment has been given off my credit card.but I never  buy any paid apps.Eac

  • How to merge cells in an ADF Table??

    I have to make a ADF Table in which user should be able to select adjacent cells and when clicked on a merge button these cells should be merged.. Does any one have example on this??

  • Creating a Continuous table in Pages

    I am a designer, so exuse my ignorance of Pages, I hardly ever use it... I am setting up a template for myself... It is a table and will be sevaral pages long. Depending on the project it could be from 20-80 pages long... This is a dual language setu