I dropped a folder called Logs on my desktop and don't know where it belongs!
Hello,
I accidentaly dropped a folder called Logs onto my iMac desktop. I want to put it back in its proper place but I don't know where it belongs. Inside the "Logs" folder is 1. a folder called CrashReporter 2. a document called CSConfigDotMacCert.log 3. a folder called DeviceLink etc. Please help!!
Thanks,
alscxc
it's just a copy of the folder and its contents. For example, you could drag your pictures folder to your desktop and it will keep a copy there, but also in your homefolder. You can delete the alias or copy from the desktop and the origional folder will still be in your home folder.
Similar Messages
-
My call log is not maintaining and some are missing in middle dates both dailed and received also.
Recent calls is set 100 calls that's includes dialed and missed call
-
I have an iPhone 4. I've been archiving email I want to keep but I don't know where it's going. I don't see a folder called "Archive"
The procedure is Settings>Messages>Send & Receive at>You can be reached by iMessages at>Add another email address. The email address has to be a valid working email address, obviously. Apple should verify the email address and you have to go to the inbox of that email account, read the verification email from Apple and follow the inductions in the email in order to complete the verification. Then you go back to the settings, uncheck your email address and check the new email address to be used as the contact email address.
-
How do I use Automator to duplicate a folder with graphics on my desktop and erase their Resource forks?
I do not use command line and tried to use ZapResourceForksAMAub_1.2 which I downloadedand instaled the Zap Resource Forks.action. Next I tried to use their sample copy-zap-rsrc.workflow in Snow Leopardon my Mac Pro. The 3 different steps are displayed in Automator but there is no place to put in which folder (on my deskto) to copy, and remove the resource forks from the graphic files.
Can sombody please step me through this please please.
W.W.Unfortunately, Back to My Mac only works across computers using the same iCloud account.
-
hi. I don't know where my videos go on MAC. I can see all my photos in iPhoto folder, but can't see any video. Is there any other place they go or should i do smth different to find copy them separately? Pls help
Try user folder/Movies.
-
Is there any way to recover lost files and folder? I shared my desktop and suddenly I lost every single file in it. I have a MacBook Air.
Processor 1.8 GHz Intel Core i5.
Memory 4 GB 1600 MHz DDR3From your backup
-
I have a photo album called "My Photos" and i dont know where it came from and i dont know how to delete it.
Did you synch it from your computer?
-
My iPhone was stolen so last night I went on cloud & found the general area it was in & put it on lock & called police. Now what? I know were it was last night, but don't know where it is now.
Not sure what you mean.
Now nothing.
You have called the police. Change your passwords and cancel the service to the phone. Not sure what you are asking. -
Call log, text messages, emails, and facebook messages erasing
Last night when I realized that my entire call log and well as all of my text messages, a large portion of my emails, and some of my facebook messages had vanished. I thought I must have inadvertently done something to make that happen. The this morning when I woke up, the new text messages and calls I had made last night were gone too. Any ideas on what is happening and how I can stop it?
Greetings, and welcome to the BlackBerry.com Support Forums.
First thing? Check the File Free at Options > Status, what is the number at File Free?
Now, remove the battery of your device, hold a minute, replace and reboot. What is the File Free now?
Read this: http://www.blackberryforums.com/general-blackberry-discussion/116396-managing-your-bb-memory-lost-ca...
And this: http://www.blackberryforums.com/general-blackberry-discussion/112029-losing-call-logs-sms-emails-opt...
Additional links to read:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB15345&sliceId=SAL_Pub...
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14320&sliceId=SAL_Pub...
http://www.blackberry.com/btsc/dynamickc.do?externalId=KB14213&sliceId=SAL_Public&command=show&forwa...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
After call ends the call log entry is red and I ha...
This problem started after a version upgrade. What a pain. How come when I finish a call log entry is marked read and I have a notification about it as though it's a missed call. Skype hasn't been the same since Microsoft bought it
See "Unexpected installation error -203"
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox -
Accessing Call logs in IOS 5 and up
i am a developer and i need to create an app that will access call logs within the app. Is there any way to do this using IOS 5 and UP?
If you are a developer, then I suggest that you post this in your private developer forum. You would get more help there. I'm not sure you can get access to the phone API for that, but someone over there should be able to tell you. This is the public user to user forum.
-
How to call a ALSB Proxy Service and don't wait for his response. Publish M
Hi,
I have a Proxy Service called PS1 that will invoke and another Proxy service Called PS_ProcessingNode that invokes 10 differents webservices during the orchestration and takes about 2 minuts.
I would like that if invoke PS1 that will invokes PS_ProcessingNode (asyncronously) and immediatly PS1 will return "OK" (don't wait for the response of PS_ProcessingNode) .
For simulate this scenario I am testing with:
- PS_Processing is a WSDL without response that has a JavaCallout with a Sleeper of 10 seconds.
- PS invokes with "Publish action" to PS_ProcessingNode but is waiting for PS_Processsing finish. I don't want this beahivour.
How I can do it for PS doesn't wait for the response of the PS_ProcessingNode?
Thanks.- PS invokes with "Publish action" to PS_ProcessingNode but is waiting for PS_Processsing finish. I don't want this behavior.
I'm glad you have a solution using JMS. But still Publish action should not wait for response. If you are seeing that behavior, you can contact Support with an SR to get it fixed.
Manoj -
ipod 4th generation
If you mean help finding the serial number, see:
http://support.apple.com/kb/HT4061
If you mean help finding the iPod itself, then if you set up the Find My iPod service prior to the iPod going missing, then there is a chance that can be tracked, though it depends on a number of factors: the iPod is turned on, connected to a WiFi network - probably not likely when you lost it on a bus, but it's not impossible - and has not had the Find My iPod service disabled. Log into icloud.com and go to the Find My iPhone section. Note, though, that you'll only get the location of the WiFi router to which the iPod is connected; there's no way to pinpoint the exact location of the iPod itself.
If you did not set up Find My iPod, then there is no way to track it. Notify the police and change any passwords for any online accounts you may have used from your iPod (the iTunes Store, for instance).
Regards.
P.S. The forum in which you originally posted (this thread may have been moved by the Hosts by the time you read this), the Using Apple Support Communities forum, is for questions about the forums themselves. You will usually get the quickest and most helpful responses if you ask in the forum for the product or service about which you need help. -
I am updating and don't know how to drag my firefox icon into folder. Where are they?
I don't know how to find the apps folder and it never asked me to drag the icon into it as it said it would in the directions. I have a mac osx
Make sure that Firefox gets installed properly.<br />
Open the DMG file and drag the Firefox program to the application folder on your hard drive.<br />
You shouldn't double-click the Firefox application to run it from the disk image, but drag it out of the DMG folder instead.
* https://support.mozilla.com/kb/Installing+Firefox+on+Mac
* http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox -
"Add Presence to Music"
Hi Flemming....
Ok.. First things first..
If I understand what you are trying to correctly....
You have choose a channel strip Patch called "Add Presence to Music" for that track..... so thats where the name is coming from...
Patches are combinations of both plugins and settings.... Like a Multi preset for a synth instead of a single sound preset....
So... don't load in patches if you want to use your own mastering Plugin...
Create a new Audio track... with the Open Library button unchecked in the Create New Track Dialog window..
Now select the Mastering Plugin you wish to use by clicking on the Insert button in the channel strip for that audio track you just created.... and a drop down menu will appear with a list of the various FX plugins you have installed.. Choose the Plugin there... and it will open it's interface...
Next, Select the preset from within the Mastering Plugin's interface itself to choose a preset (not a Patch from the Library...)
Add other FX Plugins etc.. as you wish... by repeating the process... and you can drag them around to change the order of the FX plugins in the signal flow..
Secondly,
Output 2 is set as a mono output.. so thats why it's only playing back 1 'side' of the output.... What happened to the original Output 1 stereo output track?
See how far this gets you.. and we can carry on if needed, later...
Cheers..
nigel
Maybe you are looking for
-
Error Message on the list page
What is the following error message? "The HTTP request parameter 'AccountList.LAYOUT' contains invalid data." When clicking the arrow which changes to the next page, an error message is displayed and following records are not displayed. It seems that
-
Problem in pricing determination in VA03
Hi All, I am facing in pricing determination. There is inconsistency problem for pricing determination. For one of condition type ZCN1, we have maintained the price in condition record(VK11) but even after than the condition record does not get copie
-
Camcorders for Final Cut Studio what to look for?
Hi i am getting into motion graphics, green screening, and lots of effects. I have been trying to use my isight but it is so hard to key. I have a few question about camcorders as well. This is the only place i could think of to ask. Hears what i am
-
Hi Fi Gurus, I created one Down payment request for 100 SGD and it is showing as a (open) line item balance through FBL1N as noted item. But when I reverse the same then it cleared from open item to cleared item but showing the same balance i.e. 10
-
Pass parameter between uix page
Hi, I am new to JDeveloper UIX technologies. I have created two uix page: page1 is built on a view. Page2 is on a table. How do I pass a parameter (customer_id) from page1 to page2? Any help is appreciated. Thanks ahead!