I dropped my ipod nano 7th gen..and it wont power on witout connecting to the power supply

Pls help..or shud I go to service..nd my 1year warranty got over

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

Similar Messages

  • IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help?

    IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help please?

    IPod nano (7th gen) and iTunes have said it is 'synced' however no songs show when disconnected. Once reconnected, storage says data if fully free even though sync took place, experience of same, help please?

  • I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

    I just bought a iPod nano 7th gen and having issues with clear radio channels. Please help.

    You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

  • Hello i just bought an iPod Nano 7th gen and it got crushed the same day.  Can i get a replacement?

    I went to walmart and bought a 16 gb silver nano 7th gen.  Upon paying for it i regretfully said no when they offered me insurance or w/e it is.  So i go home, charge it and upload my music to it and head out to the gym.
    Now i know most of you are gonna think i crushed it with some weights but nope.  When i finished my workout i left and got on my car.  When i closed the door it bounced back and i heard a crush.  I look down and it appears the ipod fell out of my pocket and it got destroyed.  It still turns on but the mteal is bent, the screen is all tiny shards of glass and the image behind the glass is all messed up now.
    A little vent here but i honestly have the worst luck ever.
    Now is it possible to get a replacement somehow?

    You can send it in to them: https://expresslane.apple.com/GetproductgroupList.action?PRKEYS=PF3

  • I have a ipod nano 4th gen. and it wont connect to my computer at all and I tryed to reset it but its been 10 minutes and iit wont go back to normal. It is charging fine when I use the wall plug. I need help!

    I have a ipod 4th gen and it wont connect to my windows computer at all. I've tryed to reset it but its been 10 min and it wont go back to normal. I use the wall plug in to charge it. also it wont charge on my computer but other wise it works fine. I need help!

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Ipod nano 7th GEN no audio out from head phones jack

    I am trying to use my Ipod nano 7th Gen with a monster wireless remote that connects to the charging and sync connection. The remote works fine and I can control the Ipod just fine with it, but when I connect the headphones to the headphone jack there is no audio. If I remove the wireless remote receiver from the charging sync connection the headphones jack works just fine. I am using a lighting speed to a 30 pin adaptor because the monster remote receiver is of the 30 pin format if that matters.
    Please let me know if this is normal or if there is a work around. My intention is to use the Ipod connected to a motorcycle sound system using the headphones connection to connect it to the motorcycle system amp and control the Ipod wirelessly.
    Thank you!

    Can you provide a link to the monster product, or the model name/number?  If it's a Bluetooth product, it seems superfluous to connect the receiver to the dock connector, because the 7th gen nano has built in Bluetooth.
    So, IF the remote control device is Bluetooth, you may be able to pair to it from the nano without connecting the receiver device to the dock connector.
    If it's not Bluetooth, you may be able to find an equivalent remote control device that IS Bluetooth, and not need to connect anything to the dock connector, which seems to be the source of the problem.

  • IPod nano 7th gen (brand new) doesn't recognize Headphones

    I have a brand new iPod nano (7th gen), and it doesn't detect when headphones are plugged in. I have read that the problem can ocurr because the headphones are not correctly inserted or that the headphone jack has dust inside. As i always do on a regular basis with mp3 devices, i cleaned out the jack to be sure
    This is what happens:
    When music is not playing i hear a crackle pop sound every 2 seconds or so. My headphones are perfectly fine and work with my Samsung galaxy s4 and my old iPod touch, and my brothers iPhone. Just don't work with iPod nano. I have 3 pairs of headphones all which do not work but I do not have the original headphones. they are so uncomfortable and seems unfair to me that apple would have a one size fits al headphone that only works with the device. I do not intend on switching.
    When I play a song, and then press the sleep/wake button to turn off the display, the music stops. Or if I let the music play, it stops when the screen times out and turns off. These two things occur because the iPod "thinks" that there are no headphones inserted.
    When I try to activate the FM radio, the radio won't start because it says that there is no radio signal (which occurs when no headphones are connected).
    Needless to say, the microphone and volume controls of the iPhone headset, don´t work at all (they even work on the iPod shuffle!).. and because of this, no voice recording for me!
    I have also restored the device in iTunes, and updated with no luck.....
    Thanks in advance for any useful answer!
    iPod nano

    First, make sure the headphones plug is completely inserted into the nano's headphones jack.  It should "click" into place.  The fit may be tighter than expected, especially when new.  There is a sensor in there, and if the plug is not completely inserted, you may get some sound, but the nano will not "sense" the headphones.
    If that is not the problem, you should have the nano looked at under warranty.  It should work with any standard headphones. If there is an Apple Store nearby, you can make a reservation at the store's Genius Bar and take it there.

  • How to stream movies from an ipod nano 7th gen

    I just bought an iPod nano 7th gen and I own an Apple TV and a lightning connector  to hdmi cable. Is there a way to put movies from my iPod on my tv

    The 6th gen nano could not play videos, so it certainly could not stream them to a TV.  It may have been able to show photo slideshows on a TV screen.
    The 5th gen nano (plus 3rd and 4th gen) may have had the ability, but I don't think its output was HDMI.  You could use this
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable
    to output a composite (non-digital) signal to a TV.  But the new nano has a Lightning connector, so I probably won't work (even if you use an adapter).

  • Ipod nano 7th gen problems synching

    hello,
    for the past 2 days, I have been battling an ipod nano synching issue. This ipod has been working flawlessly for the past year. And then all of the sudden, without warning, I tried to add additional music and I could not. I cannot remember the exact syntax of the error but it had something to do with the ipod not being recognized and required a restore to factory.
    I have corrected the first issue where the ipod was not recognized and had to be factory restored. Each time I restored, it would not be recognized by itunes.
    I installed itunes on another pc and the same ipod synched and reconnected just fine, pointing back to the itunes install on my primary machine.
    I resolved the first issue on my primary machine by following ht1923.
    However, now the problem I see is that even though the ipod connects successfully , to my primary machine , when I synch and add music, no music shows up on the ipod even though itunes says synch successful. The ipod says "no music".
    ipod serial number: C8NJRFX4F0GV
    my primary pc is an HP Elitebook, running windows 7 professional 64 bit version
    All itunes software completed removed and reinstalled clean.
    Thank you

    I would like to chime in that I've confirmed this as a reproducible bug on my iPod Nano 7th generation. I have an iTunes library with an offending compilation, and to avoid any possible tagging incompatability, I've converted the files to AAC with clean tags containing the album, artist, title, and track number. The album artist is "Various Artists" and I've checked off the "Part of a compilation" box for each track in my library.
    These tracks all show their correct artists when I sync this library to my iPhone. However, when I sync the exact same tracks to my iPod Nano 7th Gen, it choose a random artist from amongst all the artists within the compilation and shows that artist name on *every* track.
    iPod Nano 7th Gen has a bug in the firmware for displaying artists correctly when they are part of a compilation. The OP is likely doing nothing wrong. Apple needs to issue new firmware. Alternatively, I cannot think of any decent workaround short of splitting off each track of the compilation into a separate album, which, would be a huge pain and likely impractical for most people.

  • Ipod Nano 7th Gen Lighting Oddity

    I just recently bought a new Ipod Nano 7th Gen. and I've noticed that there is a large oval-shaped area in the middle that is darker than the surrounding area.  It covers over half of the screen.  It just seems like uneven lighting; the middle is simply darker and there is a distinct ovular edge where you can see the change.  It is quite noticeable on certain screens.  Has anyone ever heard of this problem?  Also, if I were to take the Ipod back to the retail location I bought it at and showed them the defect, could I get an exchange?
    Thanks

    I also have an iPod nano 7th gen and I noticed the exact same thing! At first I thought it was because of a thumb swipe or something. It's bothering me.

  • Ipod nano 7th gen sync issue

    I have just bought a new ipod nano 7th gen and am having issues with syncing it to my PC.  On my devices the ipod is there and recognised as such, but in iTunes the ipod doesn't exist at all.  I have the latest version of iTunes but can't find a way to access the iPod at all - any ideas?
    The iPod is recognised on the family laptop (macbook), but not the PC.  The issue is that there is some music on the PC that's not on the laptop and so would be helpful to access it via the PC and not just the macbook.

    If the video is HD, the resolution is too high for the iPod's screen, so iTunes will not sync the video.
    If this is a purchase from the iTunes Store, and you paid for the HD version, you may be entitled to also download the SD version (at no cost), which should sync to the iPod.
    FYI - There is a command in iTunes to create a new version of the video, which should sync to iPods
    menu bar -> File -> Create New Version -> Create iPod or iPhone Version
    However, videos purchased from the iTunes Store (such as movies and TV shows) have copy protection, so that command is disabled.

  • Music keeps cutting out on my ipod nano 7th gen when using bluetooth

    I just recently got an Ipod Nano 7th Gen and the music keeps cutting out when I use bluetooth headphones. It seems like it needs to have a line of sight or else the music will cut out. If I hold the ipod in my hands while running or keep it in my pocket, I am listening to more pauses than actual music. I practically have to hold the Ipod up to my head while running to not have it cut out on me (and that is obviously not comfortable). Is this how it should be or do I have a faulty Ipod? Is there some way that I can fix it or do I need to take it to the Apple store?

    thankfully I was just able to find the answer in another member's post. You can double click the side button to advance the songs. I credit member little goomba for sharing the answer on another post. Now I am back to loving my new Nano!

  • I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    I accidentally dropped by old ipod in the garage and drove over it.  So I bought an ipod nano 7th gen. to replace it.  Can I transfer the itunes from my old ipod to my new one?  I only have about 30.

    AAll of your iTunes purchases can be re-downloaded again. Log into iTunes Store, select the Purchases tab for Apps, Music, etc.
    if you've been syncing your old iPod with iTunes, you can restore everything to your new iPod from the old backup.

  • Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    Does the ipod nano 7th gen work with Belkin Blue tooth In car hands free? Customer support said it did when I bought it, but the box doesn't say it does and I dont want to open it in case I have to return it.

    If the Belkin supports the A2DP (Stereo Bluetooth) profile then it will work.

  • My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

    My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

    I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
    - Restore from backup via iTunes. This will install a fresh copy of the iOS. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.          
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

Maybe you are looking for

  • Ran a Software Update Yesterday, Now Safari Won't Open

    Hope someone can help me -- when I started up my laptop (MacBook Pro, running Snow Leopard 10.6.8), I got a Software Update notice that there were updates available.  I didn't look at what they were ( rarely do), and just clicked OK.  The install ran

  • WSUS and SQL login failures

    We're having problems with the WSUS configuration. In the wcm.log: System.Data.SqlClient.SqlException (0x80131904): Login failed for user 'domain\localmachine$'.~~   at Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndTh

  • [CS4/JS] get guide position using script label

    Hello Scripters, I am trying to get the position of some specific guides of my masterspread, the following code snippet doesnt work:      var myMasterSpread = myDocument.masterSpreads.itemByName("A-Master");      var myX1 = myMasterSpread.guides.item

  • JDevloper and Getting Started with BPM 11g

    I have the latest version of Jdevloper 11.1.1.5, and I am not finding the BPM Application, as outlined in the Book Getting Started with Oracle BPM Suite 11gR1? The settings for the 'role" are just not there? Must I run Jdevloper 11.1.2.1? which then

  • Set margins, add footer to printed pages in Numbers 3?

    How do I set top, bottom & side margins & add a header and/or footer with such things as filename & date to printed pages in Numbers 3?  This capability was available in previous versions, & is available with the "Setup" icon in Pages.  (This icon is