I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this?
I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this? I don't know what operating system it runs, or what year it was manufactured, it is a chrome one.
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.
Similar Messages
-
i got the iphone 5 today and plugged it into my laptop to look on itunes and buy some apps. i done this and disconnected my phone from my laptop however the screen is just coming up with a usb cable pointing to an itunes logo and wont go off? iv tried everything and it wont go back to the orginal home screen, just keeps coming up with the usb cable pointing to the itunes logo. please can some one give me advise as iv only just got it today
it has been into recovery mode. connecting to itunes will solve your problem. if it didnt work connect it itunes and restore your iphone.
-
My Ipod is stuck with a picture of a USB chord with an arrow pointing to an itunes logo....what is this and how do I fix it? I did look at the "printers and devices" section on my computer. It shows an un identified "apple" device that is in "recovery mode" but that is. I tried to trouble shoot it there but no help....
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I recently did an update and now my iPad is stuck showing the cord with an arrow pointing to the iTunes icon. It won't let me clear this screen. What do I do to fix it?
Well, that illustration is suggesting you plug your iPad into iTunes (current version: 11.0.2).
Have you tried that? -
My iPod is showing a USB cable with an arrow pointing to the iTunes logo
My iPod is showing a USB cable pointing to an iTunes logo, this happens everytime i turn it on, i can get nothing else. I have
done all the diagnostics and i have reset everything, nothing makes it work. It will not sync to the computer, but i know there is nothing wrong with my computer because i have an iPod nano which works fine. Please help.Hey,
So you plug it into the computer with itunes open and nothing happens?
Make sure your iTunes is upto date and try again.
Jason -
Can anyone PLEASE help me!!? I didn't realize that would be my title so, bear with me hear and read the title!!^^
The screen is telling you to connect the iPod to your computer and restore via iTunes. What happens when you do that?
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad -
Why will my ipad not update?
You need to restore the iPad now. When you restore the iPad, the newest iOS should download and install to the device.
Read this for more information.
http://support.apple.com/kb/ht1414 -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync. -
I have my entire music library (purchased and burnt CD's) on my iPod Touch from one computer and I wanted to sync it all to my new computer. I was hoping it would all transfer via sync when I plugged it in but it doesn't seem to work. Please help?!
Ok, I had a glitch, forced to restart, and lost my train of thought.
Reinstalling iTunes should fix the major issue that might have gone wrong, perhaps your explaination points will disappear and everything will be peachy again.
But if they don't, you can open the XML file in iTunes Folder using a Text edit program to see what the common pathname is to the iTunes Music folder or where your content is located.
If you moved the itunes folder, it needs to go back.
I can't download iTunes to my Vista virtual machine to test it out right now because iTunes is down, so I can't verify the pathname, perhaps your issue and the iTunes being down are related somehow?
You don't want to import all your music again, but it's a option, but you lose all your playlists, that's what I'm trying to recover.
If oyu don't have a whole lot of playlists, then simply select all the explaimation point music and delete, select File from the menu and import your itunes folder again. -
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
eddiekero wrote:
Hi, I bought an iPod 2 and I jailbreaked it before. I tried to download the iOS 5.0.1 from the Settings icon on my iPad 2 but then my iPad wouldn't turn on anymore and it kept on showing a screen with an arrow pointing to an iTunes symbol. I later learned that this was the recovery screen so I tried to put it out of the recovery mode by pressing the home button and power button simultaneously, but the screen kept on returning back to the recovery screen. I could not restore the iPad 2 on iTunes either, so I downloaded Tiny Umbrella 5.10.01 and tried to save the shsh. However, under the recovering devices section on the left side, my iPad did not appear and I only got a device titled ?18092..... I tried to save the shsh of this ?18902... anyways but this did not work. So, I clicked on the device and pressed the exit recovery but then my iPad2 screen went black with a white apple logo in the middle. This logo keeps on dimming and disappearing and even when I plug my iPad 2 to the computer, neither my iTunes nor the Tiny Umbrella notice it. I need urgent help!
At this point only a restore will fix your issue. -
My daughter's ipod touch is password locked and attached to a computer that doesnt exist anymore. i want to authorize it to my computer itunes account but itunes wont even read it due to the password failure. what can i do?
That's by design. The password is designed to protect the user's information and cannot be circumvented. You can restore it to "new" condition though, and sync it to your computer. The iPod Touch's content will be securely erased by doing this.
Refer to iOS: Unable to update or restore. Follow the instructions exactly as written. -
Was setting up my ipad, turned it off. Came back turned it on and after you select ur country step it came up with "connect to itunes" logo, how do i fix this? And i dont have a computer.?!
Reboot the computer then try placing the iPod in Recovery mode and then restoring via iTunes.
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I am trying to restore a phone that the screen does not work on, therefore I can't input my password. How can I bypass this and upload it to itunes?
You could follow the instructions in the support document that you linked from. There is a section regarding the passcode and the inability to use it or enter it. However, you may encounter more issues since you cannot use the screen.
-
i turned my ipod off while it was udating the software (oops) now all it shows on the screen is a picture of the cord with an arrow pointing up to itunes. please help.
What happens when your connect the iOS device to your computer and restore via iTunes.
Try DFU mode and then restore if necessary.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
Maybe you are looking for
-
CODE running in MAIN but not in a model class called by servlet
Here is my simple code to connect Weblogic server 10.3.3 using iiop protocol to use the MBeanServer. It is running perfectly when it is run as a simple java application in main() but when I try to call this code from a servlet placing it in a simple
-
How to rip RAW PCM audio from a DVD
Hi guys, I know audition can rip audio from a cd and from a video file but how can I rip the raw pcm audio from a dvd. I usually just record using 'what you hear' through my soundcard but is there a more accurate way of ripping the audio from a dvd?
-
I've made my pure-ftpd work properly (with a virtual user database and ssl/tls), but I haven't been able to find any proper ftp client for the unix platform the most important thing is AUTH TLS support! a gtk2 interface would be nice, but it's not ma
-
BAPI for post held invoice ?
Hi, Is there a BAPI for posting held invoices? I have to post held invoices in background....I hope there is other option, then CALL TRANSACTION. I'm on release R/3 4.70x200, but it seems for BUS2081/IncomingInvoice there is no relevant BAPI. Method
-
Hello Experts, My business scenario is that I have several surcharges which are count on different conditions. After all I need to create the condition that would be a sum of all mentioned surcharges. Basically I know pricing but for some reason I c