I got a error message 1602 while updating to 6.1.3., now my 4s is dead! only the battery load symbol!! what to do?
Total disaster again, 6.1.2. destroyed my battery life, this update my total phone! It locked up while updating, by giving me error code 1602. All the USB crap tha apple indicates is non applicable for me! new cable on a a powerbook, lates itunes version etc. Waht to do now, obviously there is no software anymore on the phone, and Itunes does not recognize the phone anymore!!!!
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Similar Messages
-
i got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?
arghineedhelp wrote:
i got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?
On your computer. -
ahh! .I restored my iphone recently and put all my music back onto my phone that day and it was fine but last night i was putting someother music on got an error music on. I got an error message about not being able to sync and now ALL my music has GONE. deos anyone know why this would have happened?
Click: Restoring your iTunes Library backup (from an external drive) here > iTunes: Back up your iTunes library by copying to an external hard drive
BTW, if you are a resident of the U.S, have iTunes 10.3 or later, and iOS 4.3.3, you can re download your iTunes purchases for free.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?
iLife '09 is not available as a download - it is only available as a purchase
iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
Exactly what did you do? And exactly what does the error message say?
On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
LN -
Corel says that it is not their problem.
Try disabling the Adobe PDF Plug-In For Firefox and Netscape "9.4.1" and make sure FoxIt is set to handle PDF files. <br />
http://support.mozilla.com/en-US/kb/Managing+file+types -
Just updated my ipad2 and can't download games from App Store. What do I need to do.
Hello twil103
Check out the troubleshooting article below for issues with access to the iTunes Store. Also there was a small amount of outage accessing the iTunes Store this past Wednesday.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Apple Services, Stores, and iCloud
http://www.apple.com/support/systemstatus/
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
One of the SAP client got an error message
Dear all,
I got an error message 'connect to license server failed 60070-15'
Others are fine. I have the service manager up and running on the server.
Any idea? Thanks.
Regards,
YukaYou may check threads first:
Re: Please Resolve my problem in connecting to server
connection fails
Thanks,
Gordon -
HT4623 my phone got an error message while trying to update
my phone got an error message while trying to update
I received an error message when attempting to install the latest update as well. Went through all steps, downloaded through Itunes and when asked to update my apple id by entering an e -mail, the following error message appears:
Could not sign in
There was a problem connecting to the server.
However, I was able to access google/gmail account servers prior to installing iOS 6. Now my phone is stuck at this error message and I can't use it! -
while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?
- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes. -
I have an iPhone 4 (IOS 4.3.1) and it was synced and backed up today.
I wanted to upgrade to the latest ios on iTunes (today's date is 3rd Jan 2013), it seemed to download ok (it took about 30 minutes or so), but when it tried to update onto the iPhone (I think this was what it was doing!) I got an error message that had code 3014 in it. Nowhere on Apple's website can I find a way to resolve this error code.
I then thought I would just try again from the beginning, but I then got an error message saying that if I continued I would lose all the contents on my iPhone so I cancelled it as I don't want to lose everything on my phone.
Can anyone help me as I am not very good at technical things and I really want to upgrade the ios on my iPhone without losing all the data I have on there already. An idiots guide would be great.
Thanks.Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
I got an error message while burning a CD in iTunes - "the attempt to burn a disc failed. The burn failed because of a medium write error." What does this mean and how do I fix it?
The disk you are using probably has a defect, not uncommon on consumer grade disks. Try another disk or better yet another disk from a different manufacturer or at least a different batch.
-
while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305
I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST -
Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help
I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file
For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).
-
Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing" don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?
#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first
Maybe you are looking for
-
I'm able to use the new one even tho the old one is there? But can't delete the old one because it's frayed out n can't tap on it to change it to the new one
-
Can you somehow use Lightroom to rename RAW files?
Okay let's say in one folder on my hard drive I have three RAW files: _DSC0001.NEF and _DSC0002.NEF and _DSC0003.NEF. Now let's say I have reformatted my memory card so my camera will once again start labeling new images with _DSC0001.NEF. So let's s
-
IP Pool doesn't apply the DNS configuration to Linux based vm
Hi, Under scvmm 2012r2, I created a IP Pool in my virtual switch as follow : IP subnet : 192.168.1.0/24 (192.168.1.100 to 192.168.1.200) Gateway : 192.168.1.1 DNS : 192.168.1.2, 192.168.1.3 Then I created some templates using the IP Pool. From these
-
Can I use LAME MP3 encoder in Audition CS5.5 instead of the inbuilt one ?
If I edit a sound file in Audition and want to encode it to MP3, instead of using the inbuilt encoder is there a plugin or a way to make audition use LAME for ancoding the mp3 ?
-
External Email Sending Configuration
How to configure NW4s server for external email communication. Help will be appreciated