I had to replace my cable modem and now my Time Capsule only talks to just the one Mac Air. My other wifi devices (another Mac Air, iPad, and iPhone) can't get on the wifi. Any suggestions?
I recently replaced my cable modem and now my Time Capsule only works with the one Mac Air and not my other devices (another Mac Air, iPad, and iPhone). Any suggestions?
It sounds like you have gone from a cable router with the TC bridged to a cable modem with no router.. so the first device to connect pick up the IP address. Did the cable company give you the same model?? Check if it is a pure modem or a modem router.. and what the last one was.
Anyway.. you should redo the setup.. do you have any computer with ethernet?? Did you buy a USB to ethernet adapter for one of your airs.. very hard to do setup without ethernet.
Also download the new utility.. with the old style.
http://support.apple.com/kb/DL1482
If you happen to be on Lion.
Redo the setup and make sure you setup correctly to router mode if the cable modem has no router or bridge mode if it is a router.
Similar Messages
-
Folders become read-only and I can't get them changed back, any suggestions?
Solved!
Go to Solution.The read-only setting on folders has nothing to do with the read-only status of the contents. It's used by Windows for its own peculiar purposes. Basically, it's none of our business.
Unable to remove Read-Only attribute from folder
-Jerry -
HT2452 I accidently pushed a photo card into the CD slot and can't get it out. Any suggestions
I accidently pushed a photo/video card into my CD slot and can't get it out. Any suggestions?
If you can Mark, take your iMac to an Apple Store or Apple certified repair provider.
IMHO, better to let Apple take care of this then inserting anything else in the slot that may damge the optical drive. -
I am in my e-mail and a keyboard came up but only the left hand-side of the keyboard and I can't get rid of it, any idea how to make it go away?
Have you turned the phone off? If so, and it hasn't fixed the issue, try a reset:
Press and hold the Sleep/On/Off button and the Home button at the same time for approximately 10-15 seconds. Ignore the slide to turn off indicator, and wait for the Apple logo to reappear. Release buttons. No content will he changed with this process.
Stedman -
I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem... -
I plugged in iPhone 5 charger to my MacBook Pro and it immediately shut down and I can't get it restarted. Any ideas how to do this without removing the battery?
If you have your MBP charger, try a SMC reset:
http://support.apple.com/en-us/HT201295
If no success, make an appointment at an Apple store genius bar.
Ciao. -
Which cable modems work best with Time Capsule?
Which cable modems work best with Time Capsule? I have Time Warner in SoCal. I am replacing my old Motorola cable modem (constantly cuts out and needs to be reset) and I also bought a new Time Capsule. I will be using the Time Capsule for my wireless network and for back ups. Thanks.
These are the cable modems supported:
Vendor
Model
Motorola
SBG6580
Motorola
SB6141
Motorola
SB6121
Motorola
SB5101
Motorola
SB5101U
Motorola
SBG901
Netgear
CG3000D
Netgear
CMD31T
Zoom
5352
Zoom
5350
Zoom
5341J
ZyXEL
CDA-30360
If anyone has used one of these with Time Capsule, feedback is appreciated. Thanks. -
How can I get Home Sharing turned on my Apple TV if I have lost my remote control and my remote apps on my ipad and iphone can not get access to my apple tv, only my itunes.
You can't, you will need to get a new remote.
-
can't get my itunes to recognize my 6th generation nano. I have installed/uninstalled. Restarted and I can't get it to work. Any suggestions?
1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts. -
I had my email acount hacked so i had to set up new email and i can't get my photos off i cloud now?
i had my email account hacked the other day and they changed the password so i could'nt get into it, so i set up a new email and password and changed password and i now can't get my photos on my ipad because it was backed up on i clould with my old email. how can i get them back?
You could try contacting iTunes store support. If you can proove your identity to their satisfaction, such as by answering your security questions correctly, they may be able to do something for you so you can regain control of the account. Although this is an iCloud issue, I'm suggesting iTunes store support because they deal with Apple ID issues all the time. You can reach them here: http://www.apple.com/emea/support/itunes/contact.html.
-
I have a 4gen iPod and I've had it for about a year and I can not get to update software
I have a 4gen iPod touch I can't get it to update since I bought it last year it's still has the 5.1.1 (9B206) it has 6.5g free storage every time I try to update it says update fail download error I am downloading via wifi good signal and everything
Connect the iPod to your computer and update via iTunes. Your problerm has happened to others too.
-
Facetime won't connect on my iPhone or iPad anymore since loading 7.1.1. Any suggestions?
as of april 16 both parties in a facetime must be running 7.1, so if your recipient hasn't updated their device, even if yours is updated it won't work.
-
I just upgraded from a Pc to a Mac mini, how can I get elements 12 onto the Mac?
Try this link and after installing validate with your 24 digit serial number - click here for PSE downloads
-
Time capsule only seems to work with my macbook pro, not vista. (wifi)
So I received my TC today and set it up. Everything is working perfectly except the new wifi network I created only works with my macbook pro, not my other laptop that has windows vista installed on it. It only works with vista when I take off the password from the network. When it's on, it says something about the settings being invalid for that particular computer. I think it has something to do with the WPA2 encryption.
Any suggestions?Nobody?
-
Ipod 4th generation can't get it to recover, any suggestions
I cannot get my ipod touch to recover. It only displays the itunes logo with a image of the usb connector and arrow. It's 4th generation.
What happens when you connect the iPod to your computer and try to restore via iTunes?
Maybe you are looking for
-
Search function in iCal doesn't work
Can't search in iCal. Notice other posts, but where's the fix?
-
Memory error when executing package through SQL Server Agent.
Hi!! I have a problem with a package (SSIS) when run on SQL Server Agent. The job is configured with the proxy and the account has the required privileges. Runs perfectly if the job runs manually, but if I let it run on schedule I get a memory error.
-
HP Pavilion g4, reinstall Win7 64bit fm a DVD disc, not work
I try to fix a problem for my friend's laptop. It is HP Pavilion G4 running Win 7 64bit OS. The laptop can not start up the windows. I press ESC to pause the start up, and run system recovery, it shows BIOS setup, system recovery and others, I then p
-
Hello, My institution uses a very strict (apparently) WPA2 enterprise encryption. For wifi to work on my mac, I need to enter the 802.1x details manually from the network pref panel. I need to enter TTLS authentification only (and leave PEAP, TLS, et
-
Why is my computer doesn't recognize my Ipod Touch?
My computer doesn't recognize my Ipod Touch. Any suggestion?