I have 10.4.7 mac os x need to upgrade to 10.5 imac

I have 10.4.7 mac os x need to upgrade to 10.5 imac

Leopard requirements/10.5.x...
    *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

Similar Messages

  • I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion?

    I have a pre-2008 Mac PRO how do I upgrade to Mountain Lion? On the Apple's site on upgrading (http://www.apple.com/osx/how-to-upgrade/), I see that "Mac Pro (Early 2008 or newer)" is required for the upgrade. What's up with that?
    Will upgrading of the GPU do the trick?
    I'm curretly on Snow Leopard, will I be limited to Lion?
    Kamal
    my system info:
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          2
      Total Number Of Cores:          4
      L2 Cache (per processor):          4 MB
      Memory:          13 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP11.005C.B08
      SMC Version (system):          1.7f10
      Serial Number (system): xxxxxxxxxxxxxxxxxxxxxx
      Hardware UUID:          00000000-0000-1000-8000-00xxxxxxxx
    ATI Radeon X1900 XT:
      Chipset Model:          ATY,RadeonX1900
      Type:          GPU
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          ATI (0x1002)
      Device ID:          0x7249
      Revision ID:          0x0000
      ROM Revision:          113-A52027-140
      EFI Driver Version:          01.00.140

    I have the following Mac Pro which I have upgraded the GPU to an ATI Radeon HD 5770:
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          3 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          8 GB
      Bus Speed:          1.33 GHz
      Boot ROM Version:          MP11.005C.B08
      SMC Version (system):          1.7f10
      Serial Number (system):          G86334VTUPZ
      Hardware UUID:          00000000-0000-1000-8000-0017F20153D2
    Mountain Lion won't install.
    Will this change or do I need to further upgrade the GPU.
    Thanks In Advance!
    --Dave K.

  • HT4972 I no longer have a PC or Mac.  How can I upgrade to iOS 5?

    I no longer have a PC or Mac.  How can I upgrade to iOS 5?

    Your iPhone can be updated to the latest firmware in an Apple Store  but you would lose all the information off your phone.
    If your happy to do this, may I recommend backing up to iCloud once you are on iOS 5.1.1 and then you will be able to perform future upgrades over wifi and restore your phone from your iCloud account should you ever need to in the future.
    The other option might be to back your iPhone upto a friends computer without syncing and this might be the only way you could restore everything back onto your updated phone.
    Also download apps to back up your contacts online so that you can restore them also after the update.
    May I suggest Contacts Backup app which enables you to back up your contacts by email, Dropbox or via USB.
    Hope this helps.

  • I have a dual core mac pro tower , can  I upgrade to lion from snow leopard?

    I have a dual core mac pro tower , can  I upgrade to lion from snow leopard?

    The 2006 and 2007 Mac Pros can be upgraded as far as Lion. Mountain Lion can be installed on Mac Pros from 2008 onward. See below:
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion — System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • I have os x 10.5.8 and need to upgrade to os x 10.6.8.  What do I need to do to get started?

    i have os x 10.5.8 and need to upgrade to os x 10.6.8.  What product do I need to upgrade to?  I cant seem to find os x 10.6.8, I can only see OS X Leopard, Snow Leopard, Lion, or Mountain Lion, and I am not sure what is what, and if my machine (MacBook from 2008 running os x 10.5.8) is compatible or not.  Please help!  Thanks, Rob

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • HT1338 I have a Mac Desk Top Computer OS X10.5.8. I have a new hp 7525 printer and need to upgrade. Can you help me do this online?

    I have a new HP 7525 printer. I have a MAC desk top coputer. It has OS X 10.5.8. I need to upgrade so I can complete the install of my printer. Can I do this online(download a new system) I am also not sure if I need Snow Lepoard, or Mountin Lion. HELP!

    You need to have Snow Leopard to get to Mountain Lion. ML is available for download from the Mac App Store.
    The Snow Leopard (10.6.x) upgrade is available only on DVD from here;
    For US; http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    For UK: http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    Update to 10.6.8 using the combo installer; http://support.apple.com/kb/DL1399
    Snow Leopard 10.6 system requirements:
    Mac computer with an Intel processor
    1GB RAM (2GB or more preferred)
    5GB available disc space
    DVD drive for installation.
    Lion is still only available from Phone Sales as far as I'm aware;
    in the US, call 1-800-MY-APPLE and ask for a sales assistant; they'll give you a download code to use in the Mac App Store.
    UK sales; 0800 048 0408
    If your Mac meets the requirements you can go straight to Mountain Lion from 10.6.8 using the App Store.
    Lion 10.7 system requirements:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7 or Xeon processer
    2GB RAM (4GB minimum recommended)
    OS 10.6.6 or later (10.6.8 recommended)
    7GB of available HD space
    Mountain Lion system requirements;
    Your Mac must be one of the following models:
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminium, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    And meet the same RAM and disc space requirements as Lion.
    Many third party applications (and some Apple ones) may need updates for SL (Adobe particularly) and definitely will for Lion/Mountain Lion, so check with the vendors for compatability before you upgrade.
    Also, while most legacy PPC apps that run in Leopard will also run in SL under Rosetta, they won't run at all in Lion/ML as Rosetta support has been dropped. That may include drivers for some older peripherals as well as apps like Appleworks or Office 2004 or earlier and many Adobe apps.
    For what it's worth, I'd go to 10.6.8 and try the printer. If it works OK, stay there until you have a chance to try the newer OS on someone elses computer. It's not for everyone, as may be attested by the number of requests for info on rolling back to SL.

  • HT201364 my mac won't let me upgrade its a 2011 imac

    my mac won't let me upgrade its a 2011 imac

    v10.5.8 is as far as Mac OS X Leopard can be upgraded to.
    To run the latest version of iTunes you will need to upgrade to either v10.7 Lion or v10.8 Mountain Lion.
    System requirements for OS X Lion
    System requirements for OS X Mountain Lion

  • HT3382 I have an early 2006 Mac Mini and need to connect it to a VGA display.  What connector should I use?

    I have an early 2006 intel core solo Mac Mini (locted in India) and need to connect it to a VGA display.  I have looked at the support articles but can't figure out what adapter to use.

    There was a DVI to VGA adapter included with the early 2006 mini.  The one that I have looks like this
    You should be able to buy one, although it's not currently listed in the US Apple online store.

  • I have problems with my Mac Book Pro after I upgraded it

    I upgraded my Mac Book Pro from MAC OS X 10.9 to Yosemite version a week ago, and now it doesn´t start

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I have a mid 2010 Mac Pro that needs additional RAM.

    My Mid-2010 MacPro (10.8.5) is running extremely slow . . . especially when I play on-line games.  1)  Is there any easy way to determine what I might delete to free up some memory?  2) I have ordered additional memory from an outside source, but it won't be here until for several days.  The only installation instructions I could find in the support pages were for a late 2010 MacPro.  Does anyone know if the process is dfferent for a Mid-2010?  Thank you for any help you might be able to provide. 

    MacBook Pro Notebook?   _OR _
    Mac Pro 65lb tower?

  • I have iWork on my Mac but now I've upgraded to Lion I can't open it. What should I do next?

    I have iWork 08. I thought I might need a new version but I can't download that either (I get a message saying you have this already from the App store). I'm stuck. Can anyone help please?

    Just reinstall and upgrade iWork '08:
    http://support.apple.com/kb/DL808
    Peter

  • How do i install Facetime on Mac, do i need to upgrade to Snow leopard?

    Hey all
    my boy's got an itouch with FaceTime on it so i want to connect my Mac Mini to it. I cannot get facetime without owning the AppStore application. I cannot install the AppStore App on the mac Mini unless i install Snow Leopard is this right?
    currently i am on Mac OS X ver 10.5.8.
    processor 1.83 GHZ intel core 2duo
    memory 1GB 667 MHz DDR2 SDRAM
    my question is that do i have to pay £26 for the upgrade in order to get the App Store application?
    cheers

    That is correct; FaceTime for Mac requires Mac OS X 10.6.6. So you will need to purchase the Snow Leopard upgrade if you want FaceTime.
    Regards.

  • Mac OS10.68 needs to upgrade to 10.75 for turbo tax 2014. How?

    How do I upgrade my Mac OS 10.68 to 10.75 so I can use turbotax 2014. This is their requirement.

    Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
    Then, determine if your Mac meets ALL minimum system install requirements.
    OS X 10.7 Lion system requirements
    Purchased emailed download code here.
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    To use OS X 10.7 Lion, make sure your computer has the following:
    An Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    Mac OS X v10.6.6 or later to install via the Mac App Store (v10.6.8 recommended)
    7 GB of available disk space
    2 GB of RAM

  • Pages: It says it's already download in the app store but my Mac says I need to upgrade it. Any ideas?

    Really need some help here. Could it have something to do with the Cloud?

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Peter

  • I have os x 10.5.8 and need to upgrade to 10.6 Any suggestions?

    Hello my husband needs snow leopard not mountain lion but I can not find a way to download this software for my mac that has os x 10.5.8 any suggestions? Thank you in advance.

    Once you install OS X 10.6 and use Software Update, you'll be at OS X 10.6.8 and can download Mountain Lion from the App store. Make sure your system can run Mountain Lion by checking here.  While 2GB memory is the minimum, 4GB is recommended.
    You probably know when you install Mountain Lion (or Lion 10.7) that PowerPC programs will no longer run, as Apple dropped that support. People running Office 2004 got surprised when it wouldn't work after the upgrade. Office 2008 and later are fine.

Maybe you are looking for