I have a : HP Photosmart Plus e-All-in-One Printer - B210a, Problem with latest software update

I have just installed HP update PSB210_231.exe . The result is that the HP B210a support software on my Windows 7 Dell PC has suddenly lost a number of facilities including the ability to review the ink levels or to run diagnostics and tests on the printer.
How can I uninstall or can you provide a fix?

Hi all,
Make sure to remove the current software by going to Start > All Programs > HP > HP Photosmart B210 > Uninstall..
Then go to Programs and Features and remove any remain item of the printer, any item should beging with HP, as well you may see the Read Iris software..
After uninstalling the software reboot your PC, download and install the updated software version below:
http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-2/PSB210_1315.exe
I believe the problem should be resolved,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Not Able to Find Drivers for HP Photosmart Plus e-All-in-One Printer B210e

I have an HP Photosmart Plus e-All-in-One Printer B210e. I went to try and get drivers for it and I either get a page that says
404 Page Not Found
Try going back to Support Home
The other page I get when I look for drivers is for HP Photosmart Plus e-All-in-One Printer series - B210 and I click on Software and Driver I get window on the screen to select my model. The models listed are B210a/B210b/B210c. B210e IS NOT LISTED. Where are the B210e drivers.
dv6500t (Windows Vista SP2 x86)/dv7-1275dx Windows 7 Home Premium SP1 (x64)/HP Photosmart Plus e-All-in-One Printer B210e/MacBook Pro (Mac OS X 10.7.5/Windows 7 Professional (x64) SP1)

Hi
Try http://ftp.hp.com/pub/softlib/software12/COL34268/mp-109398-3/PSB210_1315-1.exe
The installation is also possible with HP Printer Install Wizard for Windows:
http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe

Control Panel on HP Photosmart Plus e-All-in-One Printer - B210

The touch screen control panel on my HP Photosmart Plus e-All-in-One Printer - B210 has stopped working. I am able to use the Home button and others around the touch screen, but when I touch something on the screen it will not work.
Any suggestions?!

Hi Alloest,
I see that you're having problems with your printer control panel. I would take a look at the document below.
Photosmart B210
Let me know how it goes.

Hi I have a HP Photosmart Premium C309 all in one printer that wont pick up paper

My all in one printer stooped load paper from the main tray. I can't see any paper jammed anywhere. I'm stumped ... any advice would be appreciated.
This question was solved.
View Solution.

The troubleshooting steps in this page may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Usb for 1510 all-in-one printer causing problems with it accepting print jobs

I am having trouble downloading the driver for a 1512 all-in-one printer. It was working for about a week and it is not working now. I loaded the suggested driver 1510 all-in-one driver but when I get to plugging in the usb from my Windows 7 laptop to the printer, it does not feel it is connected. I can print items that I scan but am puzzled how it will not print. The only thing I have deduced is I need a new usb cable. I bought on ebay as I've always had good luck with hp products.
Sparky325

I decided that in spite of the fact that it had previously printed, I got another USB cord and used that and then the printer worked. The one I received with the printer must have been too loose to make a connection. This one feels snug when i need to print from my laptop. Thanks for your help. Sparky 325

HP Photosmart Plus e-All-in-One Printer B210e Does Not Print Through Wireless

I am using Mac OS X 10.7.3 on a wireless connection. I went to print, HP Utility gave me the following error message:
The printer may not exist or is unavailable at this time
It was not being used by anything else at the time. Then 2-3 minutes after I got that first error message HP Utility gave me another error message:
The printer is not responding
Then on the printer touch screen display I touched the wireless icon, chose Run Wireless Network Test, and got an error message:
Load paper into Main Tray.
The tray had plain white paper (10-15 sheets) in a nice neat stack as far back as it would go. I took the stack just to be sure it was still in a neat stack and put it in as far as it would go and pressed OK on the touch screen display and I still got the same message. Then I decide to turn the printer off using the power button, waited about a minute, and then pressed the power button to turn it on. When I did I got another error message:
Improper Shutdown
To avoid damage, use On button to shut down. Do not unplug the power cord or turn off the power outlet to shut down the device.
How is that an improper shutdown when I did use the power button to turn it off. Why is it telling me that I need to use the power button to turn it off then back on when I did use the power button to do that. What is the issue and how do I fix it. I did not have this issue with Mac OS X 10.7.2, but I do now agter the 10.7.3 update. As of right now the only way I can print from Mac OS X is using a USB connection. I can print through a wireless connection using my Windows 7 partition on the same MacBook. I am starting to think that this printer is not Mac OS X 10.7 Lion compatible.
I have a Time Capsule (3rd Generation) with the current firmware for it and the current the current AirPort Utility for Mac OS X installed.

SthrnDixieCowgirl wrote:
I don't know how to remove and add printers unless I had to format my hard drive for a completely different reason and reinstalled the printer that way.
To remove the printer, open System Preferences > Print & Scan. You will see the HP in the Printers list. Click on it once to select it and then press the minus button under the Printers list to remove it.
With this done, click the plus button under the Printers list to add the printer. With the Add Printer window open and the Default view selected, the HP should appear in this view. Select it and the Print Using menu should change to the supporting printer driver. When this happens, click the Add button to complete the creation of the printer queue.
SthrnDixieCowgirl wrote:
I have heard other people have issues with 10.7.3 for other reasons and I should have waited until 10.7.4 came out before updating and I didn't and now there is nothing I can do to go back to 10.7.2
You cannot believe everything you read. For every person that had a problem after installing the .3 update, a hundred more had no problem.
But if you wanted to go back to 10.7.2, then you can use Time Machine to do this. If you are not using Time Machine then you need to start doing so. At least the update only stopped you from network printing. What if it had stopped you from using the Mac?

HT1338 Having problems with latest software update - update just sitting in "moving items into place". Been like this all night - any suggestions ? Running mount ion lion on a MacBook Pro.

System not moving out of software update.

OSX Mavericks is so riddled with bugs, it's extremely frustrating.
I made the mistake of upgrading to a new rMBP a few weeks ago (which came with Mavericks) and so far I've experienced
random issues with the machine not waking up from sleep
display output garbled
videos freezing when played in fullscreen on quicktime
applications failing to load, with an error code of -600, as well
I've resorted to rebooting my laptop every time I want to use it, or rebooting every couple of hours, because it seems that Mavericks can't handle more than a couple of hours of runtime without crashing.
Apple, get your *** into gear, fix this crap, and find a new quality control team.

How do I scan from my hp photosmart plus e-All-In-one B210 series printer

I have a hp photosmart plus e-All-in-one printer and have tried to scan to my Mac 10.6.8 desktop computer.

You might need to install software from HP for your printer.

HP Photosmart Plus e-All-in-One B210a Printhead

I have the HP Photosmart Plus e-All-in-One B210a. I have not had any issues with it until now. It has barely been used. I just now took all of the plastic off of it. I turned it on and I get a "Printhead Problem" message on the touch screen. I have done everything on the HP support site to try to fix it, and it still didn't work. Please help! This printer is practically brand new. It should be working, not having issues!!

If it's out of warranty then one option might be to purchase a new printhead at the HP Part Store. The part no. is CN643A. More details in the link below....
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02137878
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer avail

I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1). For some unknown reason neither one can now print. I keep getting a message that the printer is no longer available. My MacBook continues to print ok. Any ideas?

Reboot everything. Router, printer and pad. If it used to work, it will again. It just lost itself somewhere.

OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

Hello: I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software. I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.
I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it. Any help is appreciated.
Thanks,
John

Hi,
It's an option during the installtion process. Please try the following Utility:
http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problems printing to HP officejet 6500A plus e-All-in-one printer e710n

Hi,
I am struggling to print to my " HP officejet 6500A plus e-All-in-one printer e710n". According to the setup network test (Wireless network test report), everything is successful (status "PASS" for all fields). I also checked that the IP configured is the same as the IP displayed on the printer when i push the wireless button (updated via "Update IP address").
I have a laptops as well as netbooks connected to the wireless network. All these devices could previously print, however now none of them can. When i run the diagnostics (both the standard trouble shooter, as well as the one from microsoft when clicking on the fixit option), no problems are detected. When checking the device manager, i can see no conflicts.
When i open the printer control panel and click on "Customize your printer" and then go to "Ports" and click on the "configure port" option, i get an error "An error occurred during port configuration. Operation could not be completed (error 0x0000007b).".
Please assist with any suggestions.

I was able to resolve the problem.
I reinstalled the printer on one of my other laptops (this might have cleared up an error on the printer). I think the true problem is related to the fact that we left the printer on, we've started switching it off when not in use. Even though it goes into sleep mode, it seems to cause problems over time if not switched off on the printer itself.
The basics i did was check the network connection, printed a status of the network connectivity (you can do that from your control panel on the printer). If the network looks good, then try leaving your printer off for an hour or so, if that doesn't work, try reinstalling the printer on your device and start switching it off after use. I know it sounds crazy, but that's what i've been doing and haven't had a problem since.
It was a strange problem, in some cases i wasn't able to see the printer from devices that previously could, when the devices that could see the printer tried to print, it would print okay for a few pages and then start printing garbage, followed by failing completely and cancelling the print. When this happened there would be an error on the device saying it cannot connect to the printer, even though it could at the start of print.

HP update HP Officejet 6500A Plus e-All-in-One Printer-E710n multi fails @ 96%Z

HP Officejet 6500A Plus e-All-in-One Printer - E710n
Windows Vista
HP is trying to update my HP Officejet 6500A Plus e-All-in-One Printer - E710n w/ "HPZSetup.exe & multi fails @ 96%
Errors:
HP-PhotoSmart All-In-One Series "Error" "wStub" "2229580"
Same message appeared multiple times with new numbers: 459624; 525134; 328216
I am on WIFI but system always shows me on USB. I thought maybe that was the problem so I connected by USB. No Help.
I assume this is an update?? HP is insistant and keeps sending me this update which alwaysends in FATAL ERROR at 96%
Next steps?? Thanks JLM_JR
This question was solved.
View Solution.

No Problem. Is everything working now or this tool only removed the HP software? If so, then try downloading the full feature software to see if this fails or not here. Please choose your correct operating system; Either 32 bit or 64 bit. I will be looking forward to hearing from you.
I worked on behalf of HP.

HP Officejet 6500A Plus e-All-in-One Printer - E710n wireless print and web app problem

We have an HP Officejet 6500A Plus e-all-in-one Printer - E710n and run Windows 7 on our laptop.
I have run the wirelss setup wizard and have successfully connected the printer to the router, and both the laptop and printer are on the same network and have identical SSID.
However, we can not send any prints the printer wirelessly. We have to hook it up to the USB to do so. We are also unable to access our web apps; pressing the app button on the printer control panel brings up the following:
"Connection error. The printer was unable to connect to the server. Check your internet connection and try again."
I have run through the suggested solutions under "A Network Connected Printer Cannot Access Print Apps, Web Services, or ePrint" in the customer care help centre which didn't work, although when I tried to enter the IP address under IPv4 into the browser address bar it timed out. I tried the HP Print and Scan Doctor, but it returns a result that suggests everything is fine.
I turned off the firewall and tried again with no luck.
I really am at a loss now. Diagnostics say it should work, but it doesn't. Help!

Disable Bitdefender altogeher and try again.
Also, see this: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02251103
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Officejet pro 8600 plus e-all-in-one color managment problem.

please help, I'm a photographer and I own officejet pro 8600 plus e-all-in-one printer. I want to print my photos using this printer, but it never print them right, so I bought Colormunki photo to calibrate my monitor and my printer and match them together. The problem is I can't control the printer color management !!! I want to disable it, so I can use the printer profile in Photoshop or other applications to get the right prints. my prints are darker when I set the color management to be handled by the application, or I make the printer handle it but I will end up with wrong colors. I really really need to change the profile of the printer. how ?????? otherwise I really have no use of it in my work.

Jassim,
Kudos to you for figuring out how to better control the outcome for what you require.
I have learned something new today. Smiling!
Did you create the new profile manually or add it in from a previously saved setting? Filename / filetype?
It has been a while since I used Photoshop. I am thinking I may take another look at my old favorite.
Edits << 27-Dec-2014 >> Added the following links:
Profile Support Center
How to use ICC color printer profiles for inkjet printers
Click the Kudos Thumbs-Up!
It is a nice way to say “Thank You" for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

I have a : HP Photosmart Plus e-All-in-One Printer - B210a, Problem with latest software update

Similar Messages

Maybe you are looking for