I have a MacBook Air (10.8.2) connected to Canon MP530 printer. I'm unable to scan documents as MP Navigator is not supported. Any ideas on how to scan using this printer.
I have a MacBook Air (10.8.2) connected to a Canon MP530 printer. I am unable to scan documents as it appears my Mac does not support MP Navigator. Any ideas? I have made an inquiry to Canon but have not received any answers yet.
Why do you say your MBA won't support it? MP Navigator for OS X 8 and the MP530 is available here.
Similar Messages
-
I have a new Macbook Air, 6 months old, and for the last few days the fan had run continuously, this is the first time it has ever run, and now it won't stop, the fan starts up as soon as I turn it on and the computer seems to running more slowy.The computer is not hot but I am worried it may burn out,.Any ideas on how I can fix this please ?
Hello dwb,
Here is the screen shot, just the top half, there are another 10 pages, but I guess this should enough for you to have an idea of waht is going on, bit small I am afraid. No, I don't have any apps setup to run when I open my computer, the kernel, varies between 290 and 305 per cent ish.
Would that PRAM thing help ? I think it may be the computer itself, well something inside, as this the first time that the fan has ever started running since I have this computer, even when I have 3 or 4 apps running.
Thank you again for your advice,
Regard,
Beauty of Bath -
I am trying to record a meditation from my Macbook Air and an annoying loud sound, like a burp, will suddenly erupt from the MacBook, necessitating I start again. Any ideas on how I may stop this, or what it is??
Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.
Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things). -
When I attempt to connect my new MacBook Air to my home network I receive a dialogue that says " Could not join <name of network>. A connection timeout has occurred. Any ideas on how to deal with this?
Please review the following Apple Support article for assistance with troubleshooting wireless connections.
You may also find this OSXDaily article helpful as well. -
i can't completely control my cursor on my macbook pro, and it keeps jumping to the right of the screen and switching my screen to the dashboard or utilities. Any ideas on what might be causing this, and what I can do about it?
If you have another pointing device installed, remember that the Mac uses "all sources live". You can literally use two or more mice or two or more keyboards at once.
Your trackpad, if that is what you are using, must be very clean. Any debris may be seen as another "finger". -
I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?
The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]] -
I have Iphone 3G, it is disabled bec kids can't remeber the password. trying to enable thru Itunes but phone won't connect to wifi. it says no service. have also tried to erase/restore the phone thru icloud, but with no internet, it can't be found.
any ideas on how i can restore this phone and reset it??You cannot go back
Basic Troubleshooting
Reset
Restore with back up
Restore as new
After updating did you reset the iPhone ,if not it is like not rebooting after an update to a PC -
I accepted/installed an update for iMovie and it turns out that this version is not compatible with my graphics card. So now I can no longer open or use iMovie. Any ideas on how to get around this - how to revert to the previous version??
Look in your Applications folder. If your system behaved as expected, you should have an iMovie 9.0 folder in your Applications folder. Apple moved the old version there as even they suspected the new versions was a train wreck.
-
i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x mas and that is tomorrow
AdaS_VZW,
I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
Shawn -
Trying to convert Pages to Word doc, but keep getting this error message: TypeError: Object doesn't support property or method 'invalidate' JavaScript console contains more details. Any ideas on how to get past this?
Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.
-
i keep getting a message saying 'the iphone software update server could not be contacted' when trying to restore my iphone. Any ideas on how I can rectify this? Thank you
Thank you. No my phone hasnt been jailbroke, therefore I'll keep trying.
-
Purchased an IPAD mini 2 today. I am trying to transfer apps such as Angry Birds and not lose my progress. New IOS will not allow sharing of apps. Any ideas on how I can do this?
You can transfer the games but you will lose your game progress. now if you've played through game center you might keep something, but I'm not sure, I turn that off. But when I transferred my angry birds from my touch to my ipad i had to replay the levels over
-
I have a macbook air and i have been unable to access the app store since i have gotten the laptop which was 11 weeks ago. It says i am not connected to the internet but i am also because i am unable to connect to the app store i cant receive any updates.
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.
5. A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273 -
Windows Cannot Connect to Canon MP530 Printer via AEBSn
OK, here's my setup, and my problem:
1. Mac mini, Windows Vista PC, Windows XP PC all connected to an AEBSn via Ethernet.
2. Bonjour for Windows installed on both PCs.
3. Ministack w/built-in powered USB2.0 Hub & Internal HDD connected to AEBSn's USB port.
3. External HDD in USB 2.0 enclosure attached to Ministack via USB port.
4. Canon MP530 Printer connected to Ministack via USB port.
I can read and write to the Minstack's internal HDD and the other External HDD from any computer on the network, no problem. I can print to the printer from the Macintosh. But I CANNOT print from the Windows PC.
I can, allegedly, see the printer from the Windows machines and add it via Bonjour. I have also tried to add it via the method listed at iFelix's website (i.e. adding a printer by creating a new TCP/IP printer port). But nothing works.
Here is what happens: everything "appears" to work and the printer shows up on the Windows machines and in fact quite often once it is set up I can print a test page. However, once I try to use the machine later on, after the initial set-up it never works, this has happened now over about 15-20 cycles of installing, uninstalling, and re-installing the printer.
What I notice happens by looking at the Windows printer queue when i send a document to the printer in Windows is the following:
1. Sometimes the print dialog will simply say something like "Checking printer status" and just freeze there and nothing prints.
2. Sometimes it will add the document to the queue and then immediately delete it and nothing prints.
3. Quite often it will simply say something like "Printer is not responding" or "Printer is offline" and the print job just sits in the queue and nothing prints.
4. Sometimes, and I am not joking, the document will print out minutes later, inexplicably, once ten minutes later after the computer was turned off!
This is maddening and I would love a solution, even if that solution is ditch the Canon and buy "insert printer name" or "known working printer", because at this point I just need to print from the network with some consistency. I can print from any computer if the Canon is directly connected, but that is a horrible process of plugging and unplugging USB cables, and this is SUPPOSED to work.
Also, I would note that I am not adverse to using a switch with the printer, and would prefer an auto switch if anyone knows one that is know to work with PCs and Mac. I would prefer one that did not take an Ethernet port (like the new Belkin one) as I need all three of them for wired connections.
Any help greatly appreciated as I have been battling this problem for many days now with no help, and the Apple Geniuses at my local store could not provide a solution or even recommend a printer that was known to work with Windows via the AEBSn.Thanks, Arimaris!
Appreciate the response!
Your first link should be: http://www.ifelix.co.uk/tech/8013.html
That is the link for the compatibility list for the NEWER AEBSn, the one you provided is for the older base station. I've seen this list before and the problem is that most of the printers are older there, and hard to find, and there is no certainty that if you do buy that older printer it will workk as the disclaimer on the article reads: "Please also note that due to changes in firmware and software upgrades some printers which are in this list may no longer in fact be compatible."
I would love to see an OFFICIAL lost from Apple about which printers are KNOWN to work with the AEBSn via USB, but I am thinking they might not do that so as not to anger their partners who cannot seem to make their printers function properly via Windows.
I've also tried the method mentioned in your second link, many times, and it does not work for me, either consistently or reliably. I've gotten the printer to work that way (creating a new printer port via TCP/IP w/ AEBS IP addy) maybe once or twice, usually right after I set it up, and then immediately after the test print, or after a restart, it stops working. I've also had it not work after set-up. I've also experienced the "It doesn't work, walk away, and then it prints 15 mins later" syndrome, with this approach. Also, it is a pain to later delete this new TCP/IP port and try again.
Something has got to give, someone has got to know the answer to this problem. I valiantly tried to get answers from the "experts" and "geniuses" at MacWorld this month, to no avail. Sorry you are experiencing the same, I feel your pain.
Maybe you are looking for
-
Syncing says the disk cannot be read or written to
Hi everybody, I am trying to sync my Ipod touch and it starts to update purchases and apps and appears to do this alright and then when it gets to the songs it says "the ipod cannot be synced. The disk could not be read from or written to" I cancel o
-
Does OS 9.2 have a scheduled auto start-up and auto shut-down option like 10.4 does? I have a G3 Wallstreet which had 8.6 on it. I just installed 10.2 because I wanted to use the screen saver feature to turn the machine into a Photo Display. But, 10.
-
I downloaded/installed Aperture to demo - decided it was much more than I needed (iphoto is enough for my needs). So I put the shortcut on the desktop into trash, went to Finder and put Aperture in trash, then deleted trash. But ----- I still have a
-
So I went to use disk utility recently and realized that it was no longer there. I started looking through the web for ways to get it back and found all the threads about the disk utility problems for people with mac osx 10.3.9, which i do, when upgr
-
2011 MBP - HD in Optibay - Sudden Motion Sensor?
2011 15" MacBook Pro with BTO Apple SSD. Optibay with WD 750GB Scorpio Black. What is the correct setting regarding the Sudden Motion Sensor? There is conflicting information that this drive does or does not have a SMS - according to WD's website it