I have a modem from my cable company that provides WiFi. When I try to connect time capsule to the modem via an ethernet cable I am unable to and I also lose my wifi connection

I have a modem from my cable company that provides WiFi as well as ethernet ports for internet TV and Sonos. But when I connect Time Capsule via an ethernet cable to the back of the modem I am unable to get it to work and I lose my wifi connection completely. I added Time Capsule to back up data and also to extend the reach of my wifi with an airport extreme hooked up by another computer.

Put the TC in bridge before you plug it in.. ie do the setup in isolation to the rest of the network..
I would also start a new wireless name on the TC so it is different to the cable router..
If you want to be exacting also set wireless channels so the cable router is set to say channel 1 and the TC set to 11 for 2.4ghz. Then plug it in.. you will have no trouble as the TC will get an ip address as part of the existing networking.. then extend the wireless using the extreme.

Similar Messages

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

I have CS6 master collection. After update from Windows7 it didn't work. When I try to install again, it says the serial number is invalid. What to do?

I have CS6 master collection. After update from Windows7 it didn't work. When I try to install again, it says the serial number is invalid. What to do?

Please refer to the steps in Re: cs6 serial suddenly invalid.
It should help you.
Regards
Rajshree

Time Capsule as an External Hard Drive + Ethernet Cable question

In reading up on the Time Capsule, it can be used as a router and for storage purposes.
Some questions:
1) can the Time Capsule be used just as an external hard drive, not for back up purposes at all? Is there a setting that needs to be checked to make sure that it doesnt back up anything at all.
2) can I move files from a macbook or pc to the time capsule via an ethernet cable for faster speeds? Do I need a special ethernet cable?
3) can I also move files from a macbook or pc to the time capsule via wifi if I want, just wondering if it is possible?

slumpey326 wrote:
1) can the Time Capsule be used just as an external hard drive, not for back up purposes at all?
yes.
however, files stored on the TC's disk cannot be backed up using time machine. also, if the drive fails, it will be very difficult to retrieve the data from it.
in other words, you need to find alternatives ways to backing up your data.
Is there a setting that needs to be checked to make sure that it doesnt back up anything at all.
turn time machine off in system preferences > time machine.
2) can I move files from a macbook or pc to the time capsule via an ethernet cable for faster speeds?
i'm not 100 % sure about a PC but definitely from a Mac.
Do I need a special ethernet cable?
[Cat6_|http://en.wikipedia.org/wiki/Category_6cable] will be fine.
3) can I also move files from a macbook or pc to the time capsule via wifi if I want, just wondering if it is possible?
again, not sure about the PC but yes for the Mac.
edited by the Jolly Green Giant (where Green stands for environmentally friendly)

HT1695 My wife is working in London for 5 weeks and for some reason her ipad will not connect to btfon or btopenzones at her digs, but she has a ethernet socket, so can a wifi only ipad2 be connected to the internet via an ethernet cable

My wife is working in London for 5 weeks & staying in digs, so we thought it would be a good idea to buy an ipad2 so we could skype each other, she could watch movies from the icloud, access skygo etc,and it wouldn't be as bulky as a laptop. All fine if you can get wifi, but for some reason her ipad cannot locate any btfon or btopenzone hotspots (or provider), IN LONDON??!! We can access them at home in a little village in Northern Ireland. Her digs have an ethernet socket, is it possible to connect her ipad to this socket via an adapter?

No. She will need to come up with an alternative way to connect. A mobile hotspot perhaps.
Finding some way to connect to these hotspots would be the ideal situation. I know that you realize that. We know nothing about what is happening, but if you can explain in some detail, maybe somebody here can help.

I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

Connecting time capsule to wireless modem router via ethernet cable

Hi
I use my TC to store all my data and itunes music/media. I've noticed that when purchasing music, the download speeds are quite slow, even though when I test the broadband speed, it's at a reletively ok 5 mbps. If I hard wire the tc to the modem router, will the downloads be faster? If so, how do I connect them up with ethernet cable. I've done so, and nothing seems to appearing on my desktop.
cheers
Mark.

Reset the TC to factory settings. This will allow you to reconfigure the TC to use Ethernet.

Time capsule not found by airport but ethernet cable was working

So I turned time machine off some time ago,( got fed up with it constantly saving whilst recording music and slowing down stuff), now although i was happy (ish) as it was before, i can no longer find in preferences a drive to use as backup.
the alert box tells me that airport cannot locate, when i previously, and still do, have ethernet cabling connected .
The time capsule green light shows, but not backing up.
Can i find back up drives without airport utility being used?

Thanks for th response, i have upgraded to lion some time back and as i recall i've had this prob before and had to do a verification of some kind using the clean up disc utility.
I have already done...
the verification again without success, I did a repair disc permission on the Mac HDD,i did a restart of TC by unplugging and replugging without success.
I use TC for backup only, using ethernet and my router is wireless.
i'm reluctant to reset although I would if I could be sure.
What is the 5.6 utility?
My version 11.5.2, should i install the 5.6? if this is indeed an upgrade?
thanks for your time and patients
steve

Bridge an AirPort Express from an Extreme connected to a Motorola DOCSIS 3 cable/modem/gateway via an ethernet cable? Can I connect ethernet to the Express to setup/handshake/coordinate, and then unplug the ethernet cable from the Express?

In other words, does the AirPort Extreme NEED to be the device connected to the coaxial cable, or can I connect that cable to the Motorola SBG6580 DOCSIS 3.0 cable modem/wireless gateway? (My Internet provider requires DOCSIS 3.0 for speeds above 12 megabits/sec.)
Will the Airport Extreme "program" the Express via an ethernet cable, and than the cable can be removed?
The "bridge" or "repeater needs to be quite a distance away from the physically connected cable modem/wireless gateway and the ethernet- connected AirPort Extreme, and we have wall-to-wall carpeting, and the walls and ceilings are off-limits (family politics), so a looooong ethernet cable is out of the question.
Any help is GREATLY appreciated!
Thanx!
P.S. The 802.11 in my house (ground floor, about fifty feet away from the modem; in the living room about 35ft away *****! And Motorola touts this wireless gateway as having amazing coverage (360, I think they call it),but in fairness, this house is old and has a 5 hanset cordless landline and a microwave and a fan, etc., etc., etc......

See if find a solution in one of these discussions:
Best bets to extend/boost signals from Airport and AP Extreme
How to extend and Extreme network using Express

Connecting Time Capsule with WildBlue Satellite Service

HELP! Please...
I am trying to set up Time Capsule to work with my satellite service, WildBlue, and I can't get it working properly.
Before WildBlue was installed, I connected my iMac and my wife's iMac (it's on Mac OS 10.5.0), one at a time, with Time Capsule directly via Ethernet and back-up each iMac.
WildBlue satellite service was installed yesterday and the installer had no idea how to hook everything up. It was his first install. I was able to connect the WildBlue modem via Ethernet directly to my wife's Mac and made it work. When I try to add the Time Capsule, that's where I run into problems.
I ran the Ethernet cable from the WildBlue modem to the Internet WAN port on Time Capsule and I could not get it to work at all via AirPort. I tried using AirPort Utility and System Preferences - Network and could not get anything to work. I then ran an Ethernet cable from one of the four Ethernet plugs on the back of Time Capsule to the Ethernet plug on the back of my wife's iMac and was able to connect to the internet and get email on her Mac. I tried to run Time Machine, but it can't find Time Capsule! The only way it seems that I can get her iMac to do anything is to either connect it directly to the modem without Time Capsule or run the Ethernet cable thru Time Capsule to the iMac and not be able to connect to Time Machine. I still could not connect my iMac (it's on Mac OS 10.5.4) via Airport no matter what I did.
Can someone help me so that I can get Time Capsule connected and working the way it should?
My understanding is that I should be able to connect Time Capsule to the WildBlue modem via Ethernet and then connect my wife's iMac directly to Time Capsule via Ethernet and still be able to run Time Machine to back-up her iMac. Her iMac and the WildBlue modem sit in the same room together and my iMac is on the other side of the house where I want to use AirPort to connect to Time Capsule so that I can back-up my iMac and have access to the internet. If this isn't the way it is going to work can someone explain it to me on how it should and how I should set everything up to work correctly?
Thank you in advance for any help you can provide me.
Rod

You can, but devices connected to the D-Link switch will drop to a maximum of 100 Mbps speeds. The Time Capsule supports 1,000 Mbps or Gigabit speeds.
If you plan to transfer a lot of files using Ethernet, the numbers speak for themselves.

Using two connected time capsules for backup: How?

Hi,
After a big i-Mac problem, I had to reinstall OSX from disc and after, 'restoring' my backup from Time Machine, I discovered that my time machine backups were my data only, NOT software or programmes. :-(
So I had a new imac with no progrmmes at all installed. Long story..... 2 or 3 days of reinstally and restoring work later my imac is 'back to new' with all programmes installed and data all safe.
It's a 2TB imac so I have bought a new 3TB Time Capsule and used time machine to back up the ENTIRE computer this time. Seems so far so good.
My question is what to do with my older 2TB time capsule?
At the moment I have it 'daisy-chain' connected to the 3TB via an ethernet cable and with its internet switched off and in bridge mode, trying to use it just an an external 2TB hard disk.
The new 'main' 3TB one is ethernet connected to my cable modem/router (SBG900)
In addition to my time machine backups to the 3TB, I wanted to backup my entire 2TB imac using Carbon Copy cloner or ChronoSyncon to the second Time capsule, the 2TB one as a 'second' double-safe backup.
I can 'see' both discs using finder and both have 'green lights' and seem to be working well but I can't' 'see' or select the 2TB TC using Chronosync when I try to select that as the destination disc for left-to-right' backup or creation of bootable disk.
I noticed also on the CCC site that it can't backup to a time capsule and that time capsure can't be used as a bootable disk?
Basically, I want to make sure that come my next 'imac crash/failure. that I don't have to spend 2 or 3 days reinstalling everything. I'd love to be able to just 'restore' relatively "easily" from a safe, external disk somewhere and have the computer back to exactly how it was 'pre-crash'.
Am I expecting too much? And what would be the best way to use my older 2TB time capsule?
any help appreciated
Philip

philipfromsa wrote:
I noticed also on the CCC site that it can't backup to a time capsule
It can. Click View all under the Example Backup Scenarios in the help.
and that time capsure can't be used as a bootable disk?
That's correct. But you can back up to it and restore from it.
Basically, I want to make sure that come my next 'imac crash/failure. that I don't have to spend 2 or 3 days reinstalling everything. I'd love to be able to just 'restore' relatively "easily" from a safe, external disk somewhere and have the computer back to exactly how it was 'pre-crash'.
You can do that with Time Machine backups no matter where they are. But you don't boot from them; you start from your Recovery HD and use its installer to restore them to your Mac.
You can also do it with CCC's backups. You just can't boot from them if they're on a network drive.
See Time Machine - Frequently Asked Question #14 for the gory details. In step (f) you can choose a Time Capsule (3rd sample) or a CC or SuperDuper clone (not shown in the sample).

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Plz advise.

Hello, I'm trying to connect my new TiVo XL4 box to my home network via an ethernet cable connection to my Airport Express but the TiVo box is not seeing the network. I have a green light emanating from the Airport Express so it is connected. Please advise.

If you have not already done so, I suggest that you temporarily disconnect the Ethernet cable from the AirPort Express that goes to the Tivo box.
Instead, turn off the wireless on a laptop and connect the laptop to the Ethernet port on the Express. See if you can get an Internet connection on the laptop.
If you still cannot get an Internet connection on the laptop, try another Ethernet cable that you know is working correctly.
Post back on your results.

I want to use the ethernet connection from my new iMac to my Time Capsule. It seems only the Wifi is seen by either device. Ive connected the Time Capsule to the iMac. How can I get the iMac to use the wired connection

I want to connect my iMac to my Time Capsule using Ethernet. I have them connected via an Ethernet cable, but only WiFi seems to be working. How can I specify the Ethernet connection instead of WiFi? Thanks
Welked

Go to preferences, network and see if ethernet is indicated. Be sure it shows a green dot. Also be sure it is at the top of the list (above WiFi). If not click on the the wheel at the bottom and set service order.

I have a cable modem for my Time Capsule. Do I need a separate cable modem for my airport express?

I have a cable modem for my Time Capsule. Do I need a separate cable modem for my Airport Express? (I'm using it to "extend" my network and also for Air Play.)

No, you connect to your Time Capsule wirelessly to "Extend" the network..
See this Apple doc:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US

I have a modem from my cable company that provides WiFi. When I try to connect time capsule to the modem via an ethernet cable I am unable to and I also lose my wifi connection

Similar Messages

Maybe you are looking for