I have a passport 0740 it shows up on my device manger

I need help.I have a passport 0740 its shows up in the device msger and states that its workin property but when i goto volumes and click populate. all the data comes back blank. could it be broken? it doesnt show up in my computer, nor does it have a letter.but there is a light on it and its flashing fine.would there be any way to retrive the data from it? any help would be appreciatedif you need anymore info let me know thank you in advance.jordan

Hello and welcome to the WD community.
Try to use a different USB cable or port on the computer, you can also try a different computer to see if you can get the drive to show up.

Similar Messages

Is it possible to not have contacts from an iphone show up on all devices in icloud account

is it possible to not have contacts from an iphone show up on all devices

Yes. If they have different iCloud accounts or if Contacts is not turned on in Settings>iCloud.

Windows 8.1 laptop not recognising Ipod, showing error 21 in device manger

I have tried uninstalling the current driver (original dated 2006) and updating but nothing seems to be available. Error 21 says trying to uninstall device.

Check out the troubleshooting steps at this link from support: http://support.apple.com/kb/TS1538
For me it was step 5 (Apple Mobile Device USB Driver) that solved the problem of none of my iOS devices being recognized by iTunes in the 11.3.1.2 version and Windows 8.1

HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

My iphone 4S shows up on my computer but does not show up in itunes devices. I have all security

I just got an iPhone 4S and am unable to get it to show up as a device in iTunes.
I previously backed up my old iPhone on my Windows 7 PC. When I connect my 4S to the PC it is recognized by the PC but does not show up as a device in iTunes.
I have turned off all virus protection software & have tried uninstalling iTunes and all associated Apple software. I reinstalled all Apple software with no results in my 4S showing up as a device in iTunes.
Any help is greatly appreciated.

Try restarting the AMDS > iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

Click here: https://supportprofile.apple.com/MySupportProfile.do
SIgn in with your Apple ID, the same one you used to access this support forum.
Hopefully, you will see a list of all the devices you registered with your Apple ID, including their serial numbers. Let me know how this works out.
Edit to add: If you enabled "find my imac" on your Pro, you ought to be able to remotely lock it, or even wipe its memory. Click http://www.icloud.com/ sign in with your Apple ID and click the big green "find my iPhone" icon (nevermind the name, it will find all your devices provided they're running Lion or iOS 5).
Then file a police report and nail the b*****d.

HT3819 Home Share issue: I have a Mac and Apple TV. Both are log into the same Wifi network and the same iTunes account (I can view purchased movies on AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers. Itunes sidebar-no

Has anyone else found solution to Apple devices not 'seeing' each other on Home Share? I have a Macbook Air (new Nov'12) and Apple TV (new Dec'12). Software updated on both. Both are logged into the same Wifi network and the same iTunes account (I can view movies purchased from iTunes on my AppleTV). Home Sharing shows 'ON' for both devices. BUT...AppleTV shows no computers... and ... Itunes sidebar does not have a 'Shared' area at all. Help please as without this functionality, my Apple TV only provides portal to purchased (i.e. Netflix,...) content which I can get from Wii or Xbox.
I have already tried the following without success:
1. Homeshare DID work the first day after I setup Apple TV... but the next day it has not worked since then.
2. Powered off 30 sec then re-started (Apple TV & Macbook & iTunes login)
3. Checked Firewall settings per Home Sharing troubleshooting guide (correct settings)
4. Turning on Photostream in iPhoto and selecting iPhoto within iTunes and then checking to see if Photostream shows anything on AppleTV (it shows 'on' for my iTunes account but 'Zero' pictures found ... despite the >3,000 pictures showing avail in iTunes).
I also have 'Remote" app on my iPhone 4, with Home Sharing turned on (same Wifi network)... it has a very similar message as the Apple TV and same result that despite all devices having HomeShare 'on' they cannot see each other: "Remote will automatically find the iTunes libraries and Apple TVs that have Home Sharing turned on using the account xxxx (it lists my correct itunes account name)."

I solved this by reset of the Wifi (unplug cable and power to both modem and wifi ... wait 60 sec ... plug in modem cable and power ... plug in wifi power and LAN to modem ... restart AppleTV and Mac ... Turn Home Share 'OFF' in iTunes then back "ON" ... it took ~60 sec for the AppleTV to pick up my Mac in computers.

I have a ipod touch, an i pad and a iphone can i use my same apple id without texts and apps showing up on every device

i have an ipod touch, an ipad and an i phone, can i use the same apple id without texts and apps showing up on every device.

Yes. Go to your iCloud settings on each device and configure what you do and do not want showing up on each device.
Go to Settings>iCloud as well as Settings>iTunes & App Stores

Often, when I connect my iPod Touch to the PC, instead of it showing up as a device in iTunes, a window pops up that says I have connected a camera, and asks what to do. It is really annoying when this happens, because sometimes I cannot update my iPod

Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?

Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

I have my itunes media stored on my external hard drive. On this external drive I have a folder called "TV shows". How do I incorporate this folder back into the itunes library?

I have my itunes media stored on my external hard drive. On this external drive I have a folder called "TV shows". I previously cut and pasted itunes TV shows to this folder to free up some space. How do I incorporate this folder (TV shows) back into the itunes library?

assuming the copy files ... when adding option is checkmarked in preferences > advanced, drag the folder into an open iTunes window while holding option (⌥).

How to have my employer's phone # show on caller id when using my personal cell/iphone 5s to call customers?

I use my personal cell phone throughout the day to call customers before arriving for scheduled apptmnts. Is there a way to have my employer's phone # show up on their caller id instead of my personal cell #? I do not want my personal cell # to be given out with these calls.

No. However, you might want to look in to google voice. Using the google voice app, you can have your GV # appear instead of your personal number. I've been using it for years now (it's free in the US), and it's worked very well. You can also have caller ID for incoming calls display your GV # instead of the callers # so you know it's a work call, and you can set schedules for when calls to GV are allowed through to your forwarding numbers.

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show pr

How do I move Elements 8 projects (slide shows) from a Windows XP computer to new Windows 7 computer that also has Elements 8 on it so that the slides shows will work (Elements 8 works well on the Windows 7 computer & I have done several new slide show projects on it)? I tried backup & restore without success. I have also found the .psess files and copied them to the catalog in the new computer but when the sides shows are opened none of the images or music is there. Only the text that I entered shows. I have even tried to replicate the file paths from the XP computer to the new computer to see if that will help.

UPDATE: By a stroke of luck I happened to find a catalog link (a PSE8D file) in the 'My Catalog' file where the imported data was stored. When I clicked on it to investigate what is was 'magically' all of my transferred projects appeared in Organizer. Upon further investigation I found that the projects transferred from my XP computer were stored in a hidden catalog that had to be accessed through the Custom Location option in Catalog Manager (accessed by clicking File then Catalog then Custom Location). No Windows or Elements search revealed this fact. I am appreciative that I just got lucky. The Adode/Photoshop company was absolutely of no help. If fact to me their structure is designed to avoid contact with their customers unless you're buying a new product. Their products have many good features (even though user unfriendly) and it's a shame they don't value their customers more once the sale is completed.
Bottom line: All of the projects (sideshows) have been recovered and work in my new Windows 7 computer. I hope my experience helps others.

Can I have my work Outlook calendar show up in my personal iCal without my personal entries showing up in iCal?

I have Outlook at work and would like my calendar to show up on my phone. I don't want my personal calendar entries to show up on my work's calendar. Is this possible?
Thanks!

*edit* Can I have my work Outlook calendar show up in my personal iCal without my personal entries showing up in OUTLOOK?

Hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work

hi, firstly my ipod touch is working fine in itunes. i reformated my computer so i lost all my old drivers ect ect, so now my ipod shows up as an image device. i have reinstalled itunes several times and installed apple mobile device but still doesnt work, i have also searched for the usbappl or whatever it is and i cant find it, i have usbappl .dll but no .sys or .inf please help

All it is supposed to show up as in Windows is an image device.
If it's working fine in iTunes, what is the issue?

My ipad is no longer showing all my videos, even though i have the option set to show all, even those that are in my cloud. I can't do anything to get all my videos to re-appear. any help?

My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??

Close the videos app and launch it again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
if they still don't show up after you launch the app again, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I have a passport 0740 it shows up on my device manger

Similar Messages

Maybe you are looking for