I have a slide with 4 smart shapes that I am using as buttons. If I select include in quiz, the On Success branch does not execute. If I deselect include in quiz, the On Success branch executes. What am I missing?
I have a slide with 6 smart shapes that I am using as buttons. If I select include in quiz, the On Success branch does not execute. If I deselect include in quiz, the On Success branch executes. What am I missing?
What setting do you have in Quiz > Settings > Required? If it's not set to Optional, do that.
Similar Messages
-
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
my program does not work properly. I run the program but it is not capable of adding any of my ebooks and when I connect my ereader, it recognises the device but it does not add any ebook either.
I uninstalled the program and reinstalled again but nothing gone better-
What should I do?
Best regardsDo you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all. the only way I can get rid of it is to shut down and reboot. Can anyone help?
Start here.
-
how can I downgrade my operating system as my bluetooth work ok with my holde commodore on the 4.2.1 system but now it is upgraded to the latest system it does not operate properley
thankyou but it looks like we won't be buying another iphone
-
I have downloaded Maverick 10.9 and installed , now my mailboxes in mail are randomly arranged as opossed to being in alphebetical order from A at the top to Z at the bottom how do you rearrenge the mailboxes in an alphbetical order.
Sync with my provider Gmail does not rearrange them on my ImacThanks for that .
My actual problem I may not have made very clear - sorry.
i.e.
[email protected]
AA insurance
Xero
apple
building
insurance
etc.
Shows the way the mailboxes are listed in the mail program under any particular provider, in my case I have three mail provider accounts with mail moved from the inbox to the appropraite mailbox eg [email protected] , Xero - where the incomeing mail is filed.
My problem is to arrange these mailboxes/folders in an alphabetical order under the [email protected] account -
When in system preferences, under languages and text, and within it in regions, there is a place where you can format numbers - or currencies by indicating that you want a dot in decimals and comma in thousands, for instance. This is in order to format numbers in calculating sheets, either in numbers of excell.
Since I have moved to Mountain Lion, this does not work. However, with an apple advisor, we were able to determine that it is not a global problem, it seems to be a problem in my computer. We found this out when we created a new administrator user as a test, and the formatting mentioned above works like a charm.
Then we tried separating all my preferencies into a untitled folder restarted and got a set of new prefernces for my own user, and the formatting required did not work.
Now I am - as you can see - quite stumped, the advisor told me it might be in the home folder, but I lost touch with him, and I am hoping that I can find SOMEONE that can help me with this issue.
Thank youHi there! Just reading that paragraph I hurt all over
But I got it solved and I would like to share it with you. I actually called Apple and they created a user roots, and from the library in the HD replaced the preferences. After that it worked like a charm.... But that is not all, then excel did not work, even if preferences did, so I went and uninstalled microsoft office, and reinstalled so that was that...
I use safari... I love it, but thanks for all your offers. If I even do need something, I will let you know. and PLEASE let me know if what I wrote above makes sense.... but it works
Take care -
When I "share: to DVD the file is transcoded. When the sharing process gets to 66%, it changes to "finishing" "CreateDVD:waiting fro create disk to finish. The sharing process does no go beyond 66%, and when I stop the sharing process, I receive the message "the share DVD operation has failed."
Is this a problem with FCPX or Create DVD? How can this problem be resolved?The handshake between FCP and a hidden app called Create Disk wasn't completed.
Try this. Select a short range and Share>DVD. In Output Settings. set it to Hard Drive to save as a disk image. (Save to your Desktop so you can find it.) For menu Background, click the Add button, then cancel. That is often enough to wake up the disk burning part of this process. If it makes a disk image, try a physical disk.
Russ -
as above ,
The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142 -
Hello all,
I have a 14.88G iPod Nano that I currently use as my primary watch. A week or so ago I started to experience a blank white screen when I press the "sleep/wake" button instead of the watch face (I have it set to wake from sleep to display the clock). When I hard reset it, it will come back fine and the screen will respond and work as normal, as soon as I manually put it to sleep by pressing the "sleep/wake" button and then try to wake it the same thing happens and I have a blank white screen that doesn't respond to touch gestures or anything.
What I have tried so far to no avail:
Numerous hard restarts (holding the "sleep/wake" button with the volume - button).
Tried this: iPod nano (6th generation): Hardware troubleshooting
Changed the watch face to display.
Recharged the device overnight (without full discharge).
Since none of this works I'm out of ideas. Eventhough I have a 6G Nano it should no longer be under warranty since I was sent it as a replacement for a different (older) product.
Any ideas? Is this a known problem? Thanks in advance for any insight any of you could provide. Also, what time is it??
Regards,Hey,
I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
Have you found any solution?
Bah, this is annoying.
//Gubbar -
The build directory of the test run either does not exist or access permission is required.
i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
RoeyHi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
JSP error page does not displayed on its own, includes in the original JSP
Problem Description: - Exceptions in a Condition cause pages to fail to render.
The actual issue is, the JSP error page does not displayed on its own, included in the original JSP Page when exception occurs.
Problem Cause: As per the JSP specification when jsp content reached the buffer size (default 8KB) the page being flushed (Part of condent displays). The default �autoFlush� value is true.
When the page buffer value is default size (8KB), and if any exception occurs after flushing the part of the content, instead of redirecting into error page, the error page content included in the original page.
If i specify autoFlush="false" and with default buffer size, at the runtime if the buffer size is reached, i am getting stackoverflow error.
To solve the above problem we can make it autoFlush=�false� and buffer=�100KB�. But we can�t predict the actual size of the page.
I found in one of the weblogic forum as no solution for this issue. Ref.
http://support.bea.com/application?namespace=askbea&origin=ask_bea_answer.jsp&event=link.view_answer_page_clfydoc&answerpage=solution&page=wls/S-10309.htm
Please provide me any solution to resolve the problem.Error-Page tags work best with an error.html pages. If you have an error.jsp page what I would do, and I have, is wrap my classes and jsp pages in a try catch block where you forward to the error jsp page and display anything you want. YOu can also do this with if else statements. I have used the tomcat error pages before but when I've implemented them I used java.lang.Exception as the error to catch not Throwable. I don't know if this would make a difference or have anything to do with your problem.
-
ORA-00942: the table or view does not exist
Hello!!!!
I have tree simple mappings each one with only one dimention and sometimes external or normal tables. One of them is ok but I can´t deploy the others.
In Controle Center I have this messege: the table or view does not exist.
I genereted both queries and run in SQL navigator with the same message.
I realized that I can set the schema properties for external tables but I couldn´t do the same for Dimension (or I don´t know where I can do this).
I believe that I have to set this propertie for dimension to have my mapping running ok, but I realized that the only one mapping that is ok does not have this propertie set.
Where is the problem?!!?!?!?
I validated these mapping and they have warnnings about column length, no errors.
In the previous OWB version I used to set this propertie, but in 10.2 I don´t know if is realy necessary.Try to open the package body with a tool like TOAD and try to compile it. When you use TOAD the process stops where the error is. Then you know which table or view doesn't exist for the OWB. If the table or view does exist then it is almost certainly a missing privilege that prevents you from succesfully deploying your mapping. If the table or view does not exist then you've got to deploy the underlying (bound) table.
Regards,
Jörg -
Getting error 462 - The remote server machine does not exist or is unavailable
I have several modules that read and write data to and from Excel 2010 worksheets. I am noticing that the Excel process does not end aven though Excel is not running on my PC. It is like an orphan process. If I try running the Access module again I get the
message "error 462 - The remote server machine does not exist or is unavailable". Here is the code I am running. When I click the Debug button on the message box the line "rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row"
is highlighted.
Option Compare Database
Option Explicit
Function ImportImportanceScores()
Dim RecSet As DAO.Recordset
Dim objXLAppln As Excel.Application
Set objXLAppln = New Excel.Application
Dim objWBook As Excel.Workbook
Dim rowNum As Variant
Dim i As Integer
Dim j As Integer
Dim StrPathFile As String, strFile As String, strPath As String
Dim strBrowseMsg As String, strInitialDirectory As String, strFilter As String
'show dialogue box
strBrowseMsg = "Select the EXCEL file:"
'set directory to load files from
strInitialDirectory = "C:\Bridge_CIP_Part-A_B\"
'run strFilter function
strFilter = ahtAddFilterItem(strFilter, "Excel Files (*.xlsx)", "*.xlsx")
StrPathFile = ahtCommonFileOpenSave(InitialDir:=strInitialDirectory, _
Filter:=strFilter, OpenFile:=True, _
DialogTitle:=strBrowseMsg, _
Flags:=ahtOFN_HIDEREADONLY)
If StrPathFile = "" Then
MsgBox "No file was selected.", vbOK, "No Selection"
Exit Function
End If
'Set Excel application object. Critical for macro to run properly. Do not change.
'Open workbook and worksheet to load data.
With objXLAppln
Set objWBook = objXLAppln.Workbooks.Open(StrPathFile)
objXLAppln.Visible = True
End With
Set RecSet = CurrentDb.OpenRecordset("Importance_Scores")
'Copy data from Excel cells to Access fields
objXLAppln.Sheets("Importance_Scores").Select
rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row
objXLAppln.Range("A6").Select
'Add records to table from Excel
With RecSet
For i = 0 To rowNum - 6
RecSet.AddNew
RecSet.Fields("CIP_ID").value = objXLAppln.ActiveCell.Offset(i, 0).value
RecSet.Fields("Target_Timeframe_for_Construction").value = objXLAppln.ActiveCell.Offset(i, 2).value
RecSet.Fields("ImportanceFactor_TI-1").value = objXLAppln.ActiveCell.Offset(i, 21).value
RecSet.Fields("ImportanceFactor_TI-2").value = objXLAppln.ActiveCell.Offset(i, 22).value
RecSet.Fields("ImportanceFactor_TI-3").value = objXLAppln.ActiveCell.Offset(i, 23).value
RecSet.Fields("ImportanceFactor_TI-4").value = objXLAppln.ActiveCell.Offset(i, 24).value
RecSet.Fields("ProjectRank").value = objXLAppln.ActiveCell.Offset(i, 33).value
RecSet.Update
Next i
End With
'Close everything
RecSet.Close
objWBook.Close SaveChanges:=False
objXLAppln.Quit
Set RecSet = Nothing
Set objWBook = Nothing
Set objXLAppln = Nothing
End FunctionIn the line
rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row
Rows does not refer to objXLAppln or to objWBook. Change it to
rowNum = objXLAppln.Range("A" & objWBook.Sheets("Importance_Scores").Rows.Count).End(xlUp).Row
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it. When asked to encrpt the Shuffle I say no, but still not recognized. When I encrypt it, still not recognized (even after it was restored by iTunes). Any suggestions please?
Did you find a solution?
My touch is doing the same thing.
Maybe you are looking for
-
MAM Order - Two items having Booking Units with Different Company Code
MAM order created with 2 Line Items Booking Unit in each Line Item belongs to different Company Code .( Internal Order within each Booking Unit has different Co. Code ) After billing individual Line Items ,Two separate Billing doc. will be created fo
-
[Solved] X + Ati = BlackScreen
I've been trying to set up my X server on a new install of Arch. I have an ATI X850XT graphics card and am trying to use the open source ATI driver however I've been having the same problem from ATI's own driver. When I run startx I get a completely
-
How to create index for Telecom large table
Hi , I'm working on DB 10G on REHL 5 for telecom company with more than 1 million recorded per day , we need to speed the query result , we know there are many types of the INDEX and I'm need a professional advice to create a suitable one , many of o
-
Missing package in gnome-extra group
The package gnopernicus in the gnome-extra group depends on gnome-speech package which doesn't exist. Neither the package itself exists nor does have an entry in the database file. pacman -Si gnopernicus You'll find that it depends on gnome-speech pa
-
Sloppy text ... in numeric control
Our software validation folks are banging on my latest app. One of them went to a numeric control and tried to input text. He said it's"weird". I think it looks like garbage. I have never noticed this before. Any way I can get rid of it? PaulG. "I en