I have already installed airport Xtreme as a base station and airport xpress as amplifier of signal. problem is I couldnt make them talk. Extreme is working properly and Xpress is flashing ambar.
i have already installed airport Xtreme as a base station and airport xpress as amplifier of signal. problem is I couldnt make them talk. Extreme is working properly and Xpress is flashing ambar.
Please describe whether your two AirPort base stations are both 802.11n-capable. Also describe how you configured them. Did you configure the AirPort Extreme to "allow this network to be extended"? Did you configure the AirPort Express to "extend a wireless network"?
Similar Messages
-
Adobe Application manager says I have already installed programs when that is not true
Hi there,
I have a CS6 subscription, and whenever I try to download and set up an application, it says that the program is already installed on two computers. Which is not true as I am going for the first install of that program.
I just spent an hour waiting for InDesign CS6 to download and install, and now I cannot start using it as it says it is already on two computers. AIt would be good to get the warning saying the program is already set up on two computers BEFORE I wait an hour for the program to download and install.
Online chat is not available and the phone number on the website is for the USA. I am in Australia.
How can I get help to solve this problem? I have NOT installed InDesign CS6 before, so how can the Application Manager think I have already installed it twice?
What is wrong with the application manager or my subscription? I am paying monthly to get access to CS6 programs and I am just getting error messages after a long wait.
Very frustrating.Sam if you are receiving the message that the software has already been activated on two other computers then please choose the deactivate all option. You can then activate on your computer and then reactivate or activate on another computer.
-
I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7. The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan -
I can't download the Adobe Edge Reflow. The file's downloading is successfull but the file doesn't go to my Creative Cloud so I can't install the programme. I have already install the Photoshop CC and the Reflow Plug-in for Photoshop.
Hello
1. I am running on Windows 8.1
2. When running the installer file from https://creative.adobe.com/products/download/reflow I get the following choice
I click "OK" which doesn't do anything for me (CC is off).
I turn CC on and run the installer again. I get the following window that within few settings disappears:
Then - just for half a second it says "Launching Creative Cloud desktop" and then it brings CC to front, and that's all.
RF still not there.
3. I spoke ta support agent on the Adobe chat on Friday. He looked into my computer for an hour. Uninstalled After Effects (after failing to update it). For some reason all apps disappeared from the list. They then reappeared after he opened PS.
This morning After Effects is still showing up in my system and is operational.
Weird.
4. At the end the agent suggested maybe Firewall is the problem here. Trying that out now. -
The app store keeps telling me that I have an update. This update is for 10.8.4. I have already installed this update. Thoughts?
Read this whole message before doing anything.
Back up all data. Quit the App Store application if it’s running. Test after each of the following steps until the problem is resolved.
Step 1
Triple-click the line below on this page to select it:
/Library/Updates
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder selected. Move the contents of the selected folder to the Trash. You may be prompted for your administrator password.
Step 2
Do as in Step 1 with this line:
/Library/Preferences/com.apple.SoftwareUpdate.plist
If there's no change, quit the App Store and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in the Software Update preference pane.
Step 3
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Caches/com.apple.SoftwareUpdate
Preferences/com.apple.SoftwareUpdate.plist
Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
Saved Application State/com.apple.SoftwareUpdate.savedState
Here, "*" stand for a long string of letters, numbers, and dashes.
Step 4
If you still have problems, quit the App Store again.
Triple-click anywhere in the line below on this page to select it:
open $TMPDIR../C
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). A folder should open. Inside that folder, there may be a subfolder with the name "com.apple.SoftwareUpdate". If so, delete it. You can then quit Terminal. -
I cannot watch support-videos although I have already installed QuickTime
I have got Windows 7 and I want to learn about ITunes because I have just ordered an IPot and next week I will get the new IPot. I find it a goot idea to watch the videos about the first steps with ITunes. Startin the video I was told to install QuickTime first. Now I have already installed QuickTime but each time I click the symbol for the video I am toled to install QuickTime first. What's wrong?
Is that video embedded in a web page? If so, are you using IE to view the page?
If so, it sounds like you haven't got the QuickTime Active X control installed yet for your IE.
Go to the following page in IE 9. (It has embedded quicktime movies, and should provoke IE to ask you about the Active X control.)
http://www.apple.com/ipad/
Down the bottom of the screen you should see a box saying that something wants to run or be installed. (It's been a while since I've seen the box in IE 9 on my system so I can't recall the precise wording.) Click the option that let's the thing run or be installed. Does the video play now? -
I purchased Photoshop Elements 13 for my Mac which does not have a cd drive. I have already installed Elements 6 many years ago. Can I still install the upgrade without using the cd?
PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
I have Already Installed Latest Version Of Flshplyr Still Browser Saying to Download Flashplayer
Hello..
I have recently Facing a problem with flash player installing.. I have already installed the latest version of flash player. But When I am playing Youtube Videos,, Playing Farm Ville,, And Snooker,, Its Asking Me To download The FLASH PLAYER..
I have Windows OS 7 With 64 Bit
And 4 GB RAM
I really messed Up With This..
What To Do plaese Help me ASAP.Can you see the Flash animation at http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html ?
If yes, what Flash Player version is displayed under it?
If no, make sure that the add-on/plugin is enabled in your browser. For Internet Explorer, disable ActiveX Filtering. -
Why the italic function doesn't works in my Pages? I have already installed the actualization and it keeps not working...
drag the other clip 'over' the main clip
the 2nd clip has to be selected/yellow border...
then you're prompted in the Inspector with the several options... -
I have already installed Window-7 in my Mac (64 bit). When I downloaded window support software I every time saw network error option on my screen. But network working very well and I can brows webpage. Will someone suggest me support for OSx Lion .
If I remember right there "may" be a problem if you have a proxie settings enabled.
System Preferences/ Network/ Advanced/ Proxies. Can't remember which one or if it was an issue in 10.7 or 10.6. Just make sure their all unchecked and try again.
You might try a search in these forums for more information. Different fix's for different issue's.
Sorry I can't help more......... -
Will upgrading to Lion effect the way any of the software I have already installed runs??
will upgrading to Lion effect the way any of the software I have already installed runs??
If it's not compatible with Lion yes - http://roaringapps.com/apps:table
-
can i safely trash Iwork '08 since i have already Installed Iwork '11 or will i loose my documents made with pages and numbers '08???
You can have multiple versions installed simultaneously. It won't hurt to delete the '08 apps, because the '09 apps will convert '08 to '09, but there is no reason to do the deletion.
You say that you have iWork '11. If that's true, it's really big news. More likely, you have iWork '09.
Jerry -
How do I get icloud to work after I have already installed it?
I have already installed icloud and when I go to log in it says that my email is a valid account but not a registared icloud user. How do I become a registared user?
I have already installed icloud and when I go to log in it says that my email is a valid account but not a registared icloud user. How do I become a registared user?
-
I have an early 2008 Mac Pro and want to install a 3TB internal hard drive. Is this compatible? The manual indicates 1 TB per bay, but I have already installed two 2 TB hard drives in two other bays, and have had no problems. Any suggestions?
RE: SATA Bus speed:
Typical Rotating drives available today, whatever their SATA spec, can source data off the spinning platters no faster than about 125MBytes/sec.
SATA 3 is rated at 6G bits/sec, which theoretically is about 750 Mega Bytes/sec
SATA 2 is rated at 3G bits/sec, which is theoretically about 375 Mega Bytes/sec
SATA 1 is rated at 1.5G bits/sec, which is theoretically about 187.5 Meg Bytes/sec
None of the SATA Busses is a bottleneck for consumer Rotating drives you can buy today. Trying to speed up the SATA Bus will not provide any real-world performance increases for Rotating Drives.
https://discussions.apple.com/message/22690384 -
How to restart base station from airport utility? I used to be able to do it remotely
I currently use a Mac Pro 10.8.4 and have a time machine for wireless 6.3 (630.34). Sometimes I cannot connect to the internet and use network preferences to diagnose the issue. This results in being told to restart the wireless. The airport utility includes the drop down option of restarting but is not clickable so I can't choose it.
With my prior macbook and same time capsule, etc if i had problems connecting to the internet I would run network diagnostics to help out. This included clicking on the airport utility ---> base station --> restart. This worked most of the time.
Bottom line, is there something I am missing in not being able to restart the wi-fi remotely? ]
Thanks in advanceYou are likely forgetting a step.
Open AirPort Utility
Click on the Time Capsule icon
Click Edit in the small window that appears
Now click the Base Station menu.....top of the screen....not the Base Station "tab" in the center of the screen
Click Restart
Maybe you are looking for
-
WebDynpro Notification Service with multiple Application Servers
Hello Experts, I am currently working on a project where I have to integrate a BSP Application into a new Web Dynpro ABAP Application. On the BSP Page it is possible to edit some details (for example for a customer). When the user start to work on th
-
None of the control buttons work, it's as if the darn video window is part of the backgroun.
-
Creative Cloud- Adobe App Manager- Acrobat X shows its installed- but its NOT
I was installing Acrobat x and it was stuck at about 30-ish% in the install, so I cancelled the installation. It now shows 'Installed' without the ability to re-install or do anything. Help!
-
Can you access secondary calendars with cfexchangecalendar?
We're currently running CF8 with plans to move to 10 on release...One feature we would like to see is to have access to secondary calendars -- I previously asked the question on Stack Overflow http://stackoverflow.com/questions/836118/how-can-you-acc
-
Changing Report Title format in Discover 4i Viewer
I have been reviewing the style sheets for configuring discoverer 4i viewer and have been able to change logos and remove copyrights etc. but I am having difficulty changing the format of the report title. the current title concatinates the discovere