I have an iPhone 4 and suddenly the "slide to unlock" button will not work. I can not use the phone, answer calls or anything at all. Ideas?
I have an iPhone 4s. All of a sudden the slide to unlock button does not work. I cannot access the phone, answer phone calls, or do anything with the phone. Anyone have any ideas?
I was having a similar problem but only when answering calls. A reset seems to have fixed it. http://support.apple.com/kb/HT1430
If that doesn't do it you may need to contact Apple Care or take it in for repair.
Similar Messages
-
MY IPAD WILL TURN ON BUT THE SLIDE TO UNLOCK BUTTON WILL MOVE
My ipad will power on but the slide to unlock feature is not working. I cant get into my ipad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
I have just updated my iPhone to version 5.1. After the update, the camera button next to the "slide to unlock" button does not work at all. It used to function well before the update. It happens to my friends as well. What should I do? Can someone help?? Thanks!!!!
Slide the camera button up
-
I have an iphone 4.
I disconnected it from my iTunes account but I am still using the iphone and the Apple ID.
If I make a purchase will it work?
Also, how can I reconnect my iphone to my Apple ID?Do you mean that you removed the phone from the 'manage devices' section of your iTunes account ? If you do then that won't stop you being able to purchase items on your phone - you only need to be logged into an account to be able to purchase with it.
If you do mean the 'manage devices' section then you can associate, or re-associate, a device (or computer) by using iTunes Match, or automatic downloads, or redownloading past purchases on it : http://support.apple.com/kb/HT4627 -
My IPOD is already synced to iTunes. My friend just acquired an iPhone and he wants to purchase an app through my iTunes. Can he use my iTunes to install the app to his iPhone without screwing up my IPOD information already on my iTunes? Also, how does he install ONLY that app on his iPhone without syncing my music also? I haven't done this before with just an app. Thanks.
Since you and your friend aren't married or in the same household (I assume you wouldn't have referred to this person as "my friend" otherwise), what you want to do is not permitted by the terms of use of the iTunes Store.
Your friend should create his own Apple ID. He can use your computer; just have him log into your computer with a user account you create just for him, not your own user account. Doing it that way is almost like having your friend use a different computer, since both Mac OS X and recent versions of Windows do a pretty good job of segregating the data of multiple user accounts.
He can then purchase the app using iTunes and sync it to his iPhone. When he's done, he should log out of your computer.
However, be aware that there is no reason to purchase an app using iTunes on a computer and to then sync it to the iPhone. Your friend can use the App Store app that's installed on the iPhone by default in order to download and install any app he likes from the iTunes App Store. -
I have a hp pavilion dv4-2160us and the dvd/cd reader is not working. it can't detect the disk too. i've done everything on the hp website to fix it (reinstall the driver, etc.), but nothing seems to help. can anybody help me with my problem? thanks!
When you say DVD drive is not working and cant detect disks, Is the Optical drive listed in Device manager and My computer? Is not reading any specific disks or all kinds of disks ?
Also have you tried all possible troubleshooting steps found over here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!! -
When I turn on my iPad2, I can see the 'slide to unlock' button and my saved screen. However, on top is the "Not Enough Storage" information. It usually allows me to either hit "close" or "setting". However, it is totally locked.
I plugged my iPad into my computer to take off a lot of apps. Nothing changed. I am totally lost as to what to do...This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]] -
About a year ago I purchased the student addition of the Adobe Creative suite 6 Design Standard and just recently purchased an additional computer for my home. Can I use the same disc that I previously purchased to download the program?
Yes, as long as the machine meets the system requirements for the software you can install and activate it. Your license allows you to have the software installed and activated on two machines.
-
I have a Sony MP3 player. I tried downloading the software onto my MacBook Pro but it did not work. Can I use my Sony with my MacBook?
What does Sony say? Sony and Apple are not on the best of terms.
Ciao. -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK
First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore -
have adobe id and a trail version of lightroom. my trail is finished. i can not use it anymore but i also can not download again lightroom via my creative cloud because i did already. so now i can not download and i can not use it
Try: Convert Creative Suite 6 applications to Creative Cloud membership
-
my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August
If you're not a registered developer, it means you've stolen Apple's software. Now you come to an Apple forum and ask for help? You're lucky you're not being prosecuted!
You can receive no help for stolen software here. Enjoy your iBrick. -
My lock button isn't working. I am using the assistive touch thing right now. Can I get my phone fixed or replaced?
Rice is hit or miss but if you can (assuming you live in a home with a furnace) sit it up with the speakers facing down on an air flow register for about 10 minutes. The heat from the furnace will not harm the sensitive components and will dry the phone out nicely including the display layers. DO NOT USE a hair blower! The iPhone is capable of drying out much more easily than phones with removable backs as the iPhone while sumbermeged in liquid (for a short time) will take on limited moisture hence can be dried and keep on keeping on. My dauhter dropped her iPhone 5 in a toilet and it was fine after spending 24 hours in rice and 10 minutes on the air register while the furnace was producing heat.
One last thing. DO NOT POWER ON the phone until the drying out efforts have been completed and certainly DO NOT plug it in. -
Need to connect to upgraded Oracle EBS R12 version from R11. The current ODI set up is pointing to R11, Can i use the same connection to point to R12? Please hele experts...
Rp1. in physical connections part can i use the same work schema
2. Can i use same contexts created or do i need to create everything as new and then try?
Thanks,
Rp.
Hi,
As you mentioned that you just upgraded the database, so the data is same and schema is same you can connect with the same work schema.
Yes, you can use the same contexts , but need to do Reverse Engineering for your new database.
And about data server, i think you also have no need to create new data server, if hostname,sid and port etc are same as these were with R11(consult with your DBAs regarding it)
Maybe you are looking for
-
How do you get to a component when the layout is very complex
I am using a gridlayout right now to act as a maze. In my case, I want to draw red squares for a particular solution to a maze, and in my case it is somewhat easy since I can just multiply the row by the columns but in a situation where the component
-
Permission issues between an intel 10.7 and a G5 10.5
Hi all, I hope you guys could should some light on and issue we are having at my office. I have 2 girls in our ad department. Angie is on a relatively new Mac Pro running 10.7, and Robin is on a G5 Mac Pro running 10.5. They are part of our company
-
CS6 Bridge and Yosemite.... Bridges Crashes
I updated to Yosemite last night and everything runs fine except CS6 Bridge. It crashes when a new folder is opened. When I open the hard drive where the image folder is Bridge does great loading that content. Then when I click on a new folder,
-
Where to find bi11.1.1.5
Hello, I just want to know only one thing by any chance is it possbile to download obiee 11.1.1.5 version for linux machine -64 bit? In the oracle.com its not available its avialble for HP machine. In the edelivary also i tried but somehow not able t
-
I have a large Captivate 4 project (160 slides). I imported a PowerPoint and had Captivate add a pause button for each slide (Advance Slide On mouse click). At a later date, I decided to remove the buttons on each slide so that the project would adva