I have an old iphone 3 backup file that i need to load back onto an i phone 3, where do i place this file on pc so when i do a backup in itunes, the itunes software will know where to 'look' for it as a selection for a backup file
I have an iphone 3 backup file saved on harddrive. Need to restore it to my upgraded s/w 4.2.1 iphone3 thru iitunes. Need a place to 'land' this file. Using Windows 7 now.
The following links gives iOS backup locations for Windows 7 and other operating systems: http://support.apple.com/kb/ht4946
Similar Messages
-
I've just bought a iphone 5 and have an old iphone 3. Apparenty I need to back up the old phone to transfer everything to the new one. How do I do that?
See http://support.apple.com/kb/HT2109.
-
I have an old iphone, a vintage, Do I need to update/sync my iphone anymore? Thanks
If you are connecting to iTunes it should say the namve of the phone as it was set up. You can check the name in Settings/
Settings => General => About
The top listing should be Name with the name of the phone listed there. You can tap the arrow and it will let you rename the phone. Mine is listed as Thom's iPhone 4S.
This is the name that iTunes should display in the Navigation column on the left side of the screen. -
I just Backed-up my iphone data on itunes and now i dont know where to find it. Where do i go to retrieve my iphone backup data?
You don't "retrieve it"
You can restore your iphone from the last backup to put the info back on the iphone. -
Since updating to the latest version of iTunes (11) I cannot find the files that I need to export from apps on my iPhone to my Desktop PC
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?
Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim -
iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?
I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released, -
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?
This started after I installed the newest update. All the files that are needed are there. I just updated Quicktime to see if that would work, but it didn't. I looked through some other discussions like this, and found out that all of my files are correct. Some people are saying that they needed to remove Filebot, but I can't find that on my computer. Help, please?
-
I have an old iphone 3 that has all my music on it. The itunes library that had all the songs in it is on a laptop that died. Ive got a new iphone 5 and Mac and was wondering how i can transfer the music from the old phone to the new one??
You can transfer the purchases you made on your old iPhone 3 by plugging it in to iTunes and doing File > Devices > Transfer Purchases from your IPhone to the iTunes on your computer. This will get music you purchased in iTunes, apps, etc. (e.g., movies).
But for the rest you would need to restore a backup of your newly deceased computer. -
I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?
I suggest you get 9.2. You need to install the same or later version of the OS. One some computer the shipped version has extra drivers. The drivers will not be in the official release in this case 9.1. They would be in 9.2.
Mac OS 9.1 (Mac OS ROM 7.5.1) and Mac OS X 10.0.4 (4P13)
*blinking question mark*
The blinking question mark means that your mac firmware could not find a valid operating system
on one of your disk volumes.
Somethings to do to resolve the blinking question mark.
http://docs.info.apple.com/article.html?artnum=58042
Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
What is firmware?
The firmware software receives control when you poweron your machine. It does some hardware testing and some hardware configuration then passes control to your version of Mac OS. It reside on a PROM ( program read only memory ) chip on the logic board.
Figuring out what level of firmware you have?
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down command+option+o+f
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US -
I have an old iphone 3G with 1900 songs and pictures that I want to put in my current itunes library, so they will sync in to my new iphone 5s. How can I transfer this info into my new library?
ThanksYou can transfer the purchases you made on your old iPhone 3 by plugging it in to iTunes and doing File > Devices > Transfer Purchases from your IPhone to the iTunes on your computer. This will get music you purchased in iTunes, apps, etc. (e.g., movies).
But for the rest you would need to restore a backup of your newly deceased computer. -
Any ideas why a film I have converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?
See:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos -
I have an old iPhone and my new phone that I'm using currently. The old one isn't being used. Can I make both of the phones receive all of my text messages even though my old one doesn't have service but there is wifi?
You can activate iMessage on the old one so it can get your iMessages. The old phone will NOT recieve SMS/MMS messages sent to your number.
-
I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch. When I plug it into my Mac laptop, there is no recognition of it as a device. Help! What do I do????
http://support.apple.com/kb/ht3406
-
I need ot re install my IPOD mini software but dont have the CD. Anyone know where I can download.
Try google. Search "Felix bruns". Select the software you want!
Maybe you are looking for
-
Hi All, While creating BOM through CS01 i am getting the following error in the first screen only - ' BOM can only be extended via master recipe'. Thnx in advance.
-
Reg : SQL query or Function -
Hi Experts, I'm in a fix between 2 approaches. Scenario : There are 2 tables say LIT (contains Literature docs) and DIAG (contains Diagams). There's some concept called 'Base number' and 'Revision' for both the tables. Ex - If Literature (or Diagram)
-
I've recently started using the preflight panel in ID CS4 when I produce my company's 4/c process covers. I have set up a custom preflight profile so that under: - IMAGES and OBJECTS > Image Resolution > color, grayscale and 1-bit images are checked
-
Hi all, Few questions to ask. 1. How to set so that the PO sender is the creator instead of the approver? 2. The subject & attachment of the PO is always default to 'SAPLMEDRUCK /YYYYMMDD/HHMMSS'. How to configure so that the PO number appear instead
-
Mac Mail. receiving messages. I hear chime. Cannot see notifications in inbox or mail icon in dock. Thus cannot open messages. Macbook pro 2009 10.6.8.