I have been using 3 devices with my wireless network, and suddenly none of them work. I've tried turning off the modem and router but that hasn't fixed the problem.

I've been using iPhone, iPad and MacBook with my wireless network, and suddenly, none of them will connect. The first sign I had that there ws a problem was when I was asked multiple times to re-enter the password, but regardless of how many times I did so it wasn't successful. I've tried turning off and on the moden and router but that doesn't help. Suggestions please?

go into the routers setup and redo the setup like it have disabled the whole wifi system
how you set it up depend on the router you own consult the manual or go to the router maker's website

Similar Messages

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

My usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

my usb that i have been using on my computer for a while suddenly stopped working, but is still glowing and letting me know that it is connected, but not showing up in disk utility

Either the physical drive or the enclosure electronics has failed. The light you are seeing is powered by the USB connection, the power, electricity, all USB ports put out. That doesn't mean the actual physical hard drive or the USB to SATA bus electronics are working properly. If it doesn't show in Disk Utility then it is DEAD.
Most of the time it is the enclosures electronics that fail. Removing the physical drive from the enclosure and put it in another enclosure or using a SATA to USB adapter, one that has it's own AC power supply, might allow you to get the files off the drive.

I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?

I have been using GRAB to capture screen displays. It has just stopped working since the last OSX Upgrade. Can anyone, please help restore functionality?

Thanks for that. I did as suggested but when I tried again, it still did not work. Another com.apple.Grab.plist appeared in the Library.
I now have the following files in Library
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.LSSharedFil eList.plist.lockfile
file://localhost/Users/peterpatel/Library/Preferences/
file://localhost/Users/peterpatel/Library/Preferences/com.apple.Grab.plist.lockf ile
What do you suggest I do now?

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

HT4623 I was downloading the new IOS and message could not find Iphone - Now my mhone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
Reboot both the computer and the phone and try again.

TS3899 I have upgrade my to iOS7 and my company recently upgrade to Exchange 2010. My emails are not synching to my inbox. I can see all of my sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

I have upgrade my phone to iOS7 and my company recently upgraded to Exchange 2010. My emails are not synching to my inbox. I can only see my Sent items. I have already deleted the account 3 times but this did not fix the inbox problem.

You need to have a different Apple ID for each of the other devices.

System is freezing up on import. I have tried to reboot my computer three times, but that hasn't worked. I have tried clearing out hard drive space and that hasn't worked.

I have tried to reboot my computer three times, but that hasn't worked. I have tried clearing out hard drive space and that hasn't worked.

Mdgc wrote:
My imac will not authorize itune movie downloads to my ipad.
What exactly does this mean? Your iMac doesn't authorize anything. Are you getting an error message or what message are you getting with regard to authorizing? The iPad is not authorized? What?
No do not restore yet.

Everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?

everytime i try to open creative cloud installer i get a error code 22 i have tried turning off my firewall and no success. what is the best way forward?

is that the case-sensitive drive error? Error "Case-sensitive drives not supported" or similar install error | Mac OS

I have been using a jam classic wireless speaker on my macbook pro and all of a sudden it doesn't connect anymore. any idea whats wrong?

I successfully paired a Bluetooth HMDX Jam Classic Wireless Speaker with my macbook and have been using it for months. Then suddenly it will not work. Has anyone else had this problem. It isn't the speaker. The best buy guys tested it and it still works with other devises. Got any ideas?

Hello there, BeckyBoyette.
The following article offers up some great Troubleshooting Tips for issues with Bluetooth:
Bluetooth Quick Assist
http://support.apple.com/kb/ht1153
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have been using extensions with V8 for several weeks and with last Firefox update this morning all are gone and I can't get them going again!

I installed V8.0.1 several weeks ago (or what I thought was V8.0.1) and got Awesome Screenshot (A.S.). Although it was stated that AS was not compatible with V8.0.1 I installed it any way and it worked. I have been using it every day until this morning. Another Firefox update came down this morning. Although I clicked the “Update Later” box, it updated at that time anyway. (This has happened every time I received an update in the past and clicked “Update Later” box, but that another problem; not the issue today.) After today’s update completed and I restarted Firefox. I check the version and it still was V8.0.1. All of my extensions were gone. I followed the instruction for re-enabling. All of the extensions were marked “disabled”. Only two of them had “enable” buttons (Garmin Communicator and InvisibleHand), both of which I didn’t load nor use. All extensions had “Remove” buttons. Is there any way for me to get A.S. working, I use it often. If not, how about “Screengrab”. That’s better than nothing.
I am using Windows XP Professional SP3.
Thanks for your help.
Andy Marino
[email protected]

There is a known issue where multiple instances of plugin container open if history or cookies are cleared. Are you, or some utility clearing firefox cookies or history, that could be the reason. This problem continues even if plugins are disabled in Firefox.
*Are you opening multiple instances of Flash Player ?
* Is the problem reproducible ? <br/> for instance does it always crash the plugin or cause it to hang if you use a particular site ?
If you get the FlashPlayer plugin crashing use the option to submit the crash reports, it is then possible to follow them up. It is possible to stop the plugincontainer opening, but that could result in a firefox crash. Of course the firefox crash can also send crash reports out, and that could be useful.
* see [[plugin crash reports]]
* [[what is plugin-container]]
* [[firefox crashes]]
There are some problems with FlashPlayer currently under investigation, and there may be other threads in the forum about problems. (e.g. Bug 561019 - Plugin waveOutOpen hangs )
Sometimes using Firefox 3.6 is a workaround that helps with FlashPlayer problems, if you wish to experiment with that consider installing firefox Portable and using Firefox 3.6.23 (or soon 3.6.24) for tests with flash player, whilst keeping firefox 7 for day to day browsing.
* [[http://portableapps.com/apps/internet/firefox_portable/localization#legacy36]]

I have been using Firefox with no problems recently updated to new version and now getting message "The proxy server is refusing connection firefox is configured to use a proxy server that is refusing connection" what do I do?? thanks

As above, was using the updated version for a short time before this happened

You may have installed an extension that made changes to the connection settings.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

HELP with restrictions AND the passcode 'turn off' option won't appear. How do I fix both problems?

Hi,
Since updating to the iOS 7.0.2 I have lost the ability to turn off the passcode lock. I put in my passcode and usually the "turn off" option would be available and I reenter my password a couple of time and I can turn it off. It doesn't even give me that option now. The feature is inaccessible. The Simple passcode option is not available either. I like to turn off the passcode lock when I'm at home because I find entering my passcode all the time when I'm at home quite annoying. I also noticed that it says the restrictions are 'on' and I have no idea how they were turned on and have no idea how to turn it off. I don't even know what the restrictions do. I tried typing in what I thought was the password and now have 4 failed attempts. I'm afraid I'm going to get locked out of my phone.
Do I have to reset my phone? Will that even work? What happened and what do I need to do to fix it? HELP!

The Restriction issues should be separate from the Passcode issue. If you cannot remember the Restrictions passcode, the only option is to restore the phone as new, and not use a backup. The Restrictions passcode is contained in the backup.
The Passcode issue. Is this Exchange account from work? If so, the Exchange administrator would be someone from the IT department. They can require a mandatory passcode on the device. It could very well be something from your username/password at work, but they should have advised you of that. Try turning the Exchange account off and then do a reset on the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if you get access to the passcode settings. If so, then it is the Exchange account. You can turn it back on after that, but you will need to get information from the Exchange administrator. They could possibly be able to change Restrictions, so I would ask about that as well. If you cannot get a Restrictions passcode, as I said earlier, the only choice is to restore the phone as new, and then you would have to sync your content back individually.

My IPhone 5s camera isn't turning on, the screen is black for every app I use for the camera and none of them work. I've turned my phone off and on again and that didn't work and I also tried resettingy phone. Any suggestions on how to fix it?

IPhone camera isn't working.

if the camera stays black when trying to use it in any application it is likely a hardware issue at that point because the aperture on the camera isn't opening. the only way to is that is by actually having the iPhone repaired through an apple store or through contacting apple support and going through a mail in repair.
if the iPhone is out of warranty though there would be a cost to have it repaired and it may end up being cheaper to take it to a third party to have them repair or replace just the camera.

Every time I go to verify my iphone ID, i get the link in my email, I enter my user id and password and then i get a screen that says "SORRY, this session has expired". I have resent the link several times, and tried, turned off my phone and still no luck

Is the something wrong with the link to verify my iphone?

The only thing that Im thinking could be the issue is that I just got the phone yesterday and it started to download is06 and didn't finish. I can't resume it where I'm at right now because there is no WI FI access so I will have to wait until I go home. Maybe because the software is updating it is causing it to time out? But then again why are you having the same problem! UGH frustrating!!

I have been using 3 devices with my wireless network, and suddenly none of them work. I've tried turning off the modem and router but that hasn't fixed the problem.

Similar Messages

Maybe you are looking for