I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it will start to install, then once it gets about 1/4 of the way done my computer restarts and it spits the disk back out.
I have OS X 10.5.8 on my iMac, I'm trying to install Snow Leopard. When I insert the disk and click install it starts, but when its about 1/4 of the way done the computer restarts and my disk spits back out. When I look to see if it installed it still says 10.5.8. Is there something I'm doing wrong?
Model Name: iMac
Model Identifier: iMac6.1
Processor Name: Intel Core 2 Duo
I bought the Mac OS X Snow Leopard Install DVD from the Apple Store.
Similar Messages
-
I have OS 10.4.11 with only 512 MB of memory and am trying to download Snow Leopard 10.6.3, it requires 1GB ram please help.
See Here for Installing RAM...
MacBook http://support.apple.com/kb/HT1651
Be sure to get the correct matching RAM for your Computer -
After rebooting my computer, there is only the flashing folder with "?" on it. I tried several things like PRAM resetting and whatnot, but nothing worked. I then tried to reinstall Snow Leopard, but it appears there is no hard disc to be found to install it. I also wanted to repair the disk first but it wasn't present in disk utilities. Did I lose my hard drive, or is this still salvagable?
That is evidence that your hard drive has failed and needs to be replaced.
-
Hello, I have try to install Snow Leopard but when I checking the section"about this computer" is show me the same soft OS x 10.5.8. Is it that normal or it must appear a different soft there. Please also advice what to do, because I have tried twice.
ThanksThese places,
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
You need to buy 10.6.x DVD or flash drive (w/ Lion or Mountain Lion).
Check Apple Store or call. -
I have a first generation MacBook Air that has been refurbished via the Apple store. I installed Snow Leopard about a year ago and now, my computer wont update! It will download the updates restart my computer, but then I get an error message and the computer wont restart!
What is a error message and what do you see when it appears?
Haven't much problem with Airs around here, since they have a SSD they tend to be more reliable.
Perhaps it was a bad update, have you ran through this list of possible fixes?
Do as many as possible, starting with #1. Until the problem is resolved.
Use the boot 10.6 USB instead of the disk of course.
Step by Step to fix your Mac -
I have a Window 7 HP laptop. I want to install Snow Leopard on an external hard drive as the memory space on my laptop is very less. I have the original snow leopard disc and I think it's a retail version . Please guide me through the installation in details. Can you also please let me know about this boot camp.
You cannot. From a legal standpoint, the license agreement for OS X mandates that you run OS X only on Apple hardware. HP is not (yet) owned by Apple.
From a technical standpoint, your HP laptop doesn't use EFI, but rather an early predecessor called a BIOS. Apple is the only vendor of consumer computer hardware that uses EFI; other vendors reserve EFI for use in servers.
Secondly, Apple's operating systems support a rather limited number of configurations of video hardware and mainboard chipsets directly since they need only support those systems that they manufacture. You cannot use Windows software or drivers on OS X, so prior to installation, you would need to write your own hardware drivers for your laptop, create an OS X drive image on a Mac, and then modify that image with your drivers before putting it in the HP.
It will be simpler (and legal), to simply purchase a used Mac. Apple's online store has refurbished MacBook Airs starting at $850 and Mac Minis for $700. If you go to e-bay or craigslist, you'll find used Macs for considerably less. -
I received my new Verizon Edge bill in the mail and it is $80 higher than my old plan. I have been so unhappy with this change over. Went through hell getting our second phone activated because of a weird computer glitch and when we asked if we would receive any consideration for the time, travel, and money we put into getting the phones the way they were supposed to be, we were told to wait until the bill came and then they could make adjustments. Now I have the bill and have no idea "who" the we would be that could make adjustments. To top it off, the only way I know my account will get any attention is to post this in chat. I am so disappointed and will be counting the months until our phones are paid off and we can change companies.
Call 800-922-0204
I just purchased a new device using Verizon Edge. Why does my bill look higher than normal?
There’s two reasons why your first bill after signing up for Edge might be higher than normal:
Prorate Charges – If you upgraded an existing line and did a price plan change, you may have price plan charges and credits that went into effect the day you upgraded.
Sales Tax – Most states require sales tax on the full retail price paid by the customer, which in most instances will be charged at the time of the first invoice.
Note: Customers who purchased devices in AL, AZ, CO, IL, NM, ND or SD will be billed taxes and surcharges monthly as payments are made.
Your bill will normally include:
Your last Edge installment payment
The next Edge installment charge
If you are on a MORE Everything Plan, a monthly access discount for each qualifying line.
The details of Edge installments and discounts can be viewed at the line level portion of your bill under Monthly Charges and Equipment Charges, or in My Verizon, My Bill then Charges By Line. -
when i try to install snow leopard with install disk, it has me restart the computer instead of installing. can anyone help me figure out how to get the disk to actually install?
Ok, it's just a glitch that it's not auto-rebooting from the disk.
Please backup your personal files off the machine to a regualr external drive and disconnect all drives before doing anything
Take the 10.6 disk out and clean and polish the bottom with a very soft clean cloth and a tiny bit of rubbing alcohol to cut the oils.
Stick the disk in and reboot holding c key down, this will make it boot from the disk and you can install Snow Leopard that way. -
i have installed snow leopard 10.6.3 on to my macbook which was currently 10.4.11, i wanted to do this so i can run Final Cut Pro 10 which needs 10.6.8 or higher. so i updated the snow leopard to 10.6.8 installed final cut pro ok. the problem i got is else where i cant save on put anything on desktop, it says i dont have permisson, and when i try and click on my documents same again. also i adjusted my dock to smaller added a few applications onto it, but every time i restart the laptop it defaults back why is this?!! so annoying. i had a look at my disk utilites and i have still got 10.4.11 on my Macintosh i can switch too? i installed the snow leopard 10.6.3 on my Data Disk. can anyone help me out why i am getting these problems and what i need to do to solve it?
disk0s2: I/O error.
disk0s2: I/O error.
The MBP's disk is damaged and requires replacement.
Genius Bar Reservations: http://www.apple.com/retail/geniusbar/ -
I have an iMAC G5 PowerPC (not Intel) running10.5.8. I sync my iphone to iTunes - but just learned I must have Snow Leopard to do so for my new iPhone 5S. Yet I can't install Snow Leopard as the G5 is not Intel. What do I do? How do I move music and pics? And keep them synced up as I purchase more?
Sorry, but that is correct. You need Snow Leopard to sync your phone and the latest version of iTunes and you old G5 cannot run that.
-
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?
zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details. -
My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard. I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host. But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning. I can't get it to run Hardware Test - just get the white screen. If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?
Hi-NRG Bwoy wrote:
I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
Reet the SMC and the PRAM
Cheat sheet to help diagnose and fix your Mac
Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
clean the disk.
If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
How to erase and install Snow Leopard 10.6 -
In the middle of trying to update my iphone 4 to the new ios7 , it stopped and said it could not be completed due to an error. Then my computer restarted and it now tells me to restore to factory settings and I will lose all my media and data on my phone. What do I do, my phone is in recovery mode and cant be used??
You have no choice but to restore the phone.
However, I'm sure you've been smart enough to have backed up your data before starting the most significant update in iOS history,right? -
I had iLife pre-installed on my aluminium Macbook 2009 with OSX Leopard on it. My hard drive broke but got most of the info off it and just installed snow Leopard on to a new drive and then downloaded and installed Mountain Lion over it. Now I don't have iLife anymore. How do I get it back?
Welcome to Apple Support Communities
Mac OS X doesn't come with iLife applications, so you have to install them manually after installing Mac OS X.
Insert the Applications disc or Mac OS X Install Disc 2 DVD and install iLfe applications. Then, open > Software Update, and install the latest update. If you want, you can purchase iMovie, GarageBand and iPhoto in the App Store, so you will get the most recent version
Maybe you are looking for
-
CO Profitability report day wise
Hi Gurus, My client wants to see the Profitability report at company code level day wise, Sale order and Product, is it possible. If its possible, then how the data will flow day wise and what are the pre-requisits to get this done. Does SAP has any
-
Another update causes box to be broken.
I switched on the vision box today to be greeted by the multi coloured lines screen again. I sighed as I knew this was going to be a problem just like last time and updat happened. I pulled all the plugs out of the box and router and restarted every
-
Solaris 10 GA and 64 bit Pentium Processor. Device Driver Problem
We have a Dell Poweredge SC420 with 3.4 GHz Pentium 4 (EMT64) it also has 300Gb SCSI disk and 2 Gb Ram. By default this machine tried to boot with the 64 bit kernel then could not load the CADP driver (SCSI CARD). We forced the Kernel to 32 bit by ch
-
If I have an order that requires 85 hours of production, and the work center responsible only has available capacity of 14 hours per day, how can I divide up the order in a Capacity Leveling Planning Table (CM22)? When I dispatch the order, it automa
-
User exit for transaction CJ20
Hi all Please suggest me the User exit for transcation CJ20 Thanks in advance Regards Neha Kapoor