I have the Aiport T-2 and need to access it outside my home for checking my security cameras and can't seem to get it done. With my Linksys I had no problems. Any suggestions?

I have a Airport T-2 and need to access it with my IPhone using Verizon outside the home Wi Fi on my 4S. Any ideas as with the old Linksys it was no problem.

Have you forwarded the required ports?
How are you doing remote access from phone?
The TC is designed to work with BTMM and iCloud but that is not available to the iphone.
Look at Tesserax's work on remote access and port mapping here.
https://discussions.apple.com/community/wireless/airport?view=documents
Good luck!!

Similar Messages

  • TS1424 My computer that I downloaded ALL the Itunes on crashed 3 weeks ago and I just got another computer last week,  Itunes says to reauthorize my computer,,,can't seem to get it done!!

    The computer I used to download all my Itunes on crashed,,I'm using a different one that has let me get access to all of my other accounts. Itunes shows me a message to authorize my computer I'm now using,,,,I've done everything they've said to do and I can't authorize my current computer.  HOW do I authorize my computer ???

    " When I did this, my library showed all the music I have "purchased" from itunes but did not have the music that I downloaded a long time ago through itunes from my old CDs."
    Correct.
    " How can I get that music to show up in my library now on my new computer?  "
    Copy it from your old computer or your backup copy of your old computer.
    The sync is one way - computer to ipod.

  • HT3606 I have a MacBook with OS 10.4.11 and need OS 10.5 or newer Software for my Canon Digital camera--- any suggestions?

    I have a MacBook with OS 10.4.11 and need OS 10.5 or newer Software for my Canon Digital camera--- any suggestions?

    Snow Leopard General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply.
    Some features require Apple’s MobileMe service; fees and terms apply.
    If you need to purchase Snow Leopard you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay

  • How can I change my security questions for my Apple ID. I can't seem to get the questions correct at the moment

    How can I change my security questions for my Apple ID. I can't seem to get the questions correct at the moment

    The Best Alternatives for Security Questions and Rescue Mail
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contact Apple support.
        c. Rescue email address and how to reset Apple ID security questions.

  • I have the new iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to get it to work....

    I have the iphone 5s and I am trying to sync my music from itunes on my desktop, but can't seem to do it, any suggestions??

    Make sure you have selected to sync your entire library, or have checked the songs you want to sync.  This might help: http://support.apple.com/kb/ht1351

  • Recently purchased iPad 2 from the Lakeside store and cant seem to get an invoice sent to my mobile me address. Any suggestions

    I cannot seem to get the Apple Lakeside store to send me an email of my recent purchase (iPad2)(26 April 2011.
    Have spoken to one of the managers by phone and have spoken to Applecare.  When ringing the store seems that nobody answers the phone on extension 5, but is quickly answered on the business extension. Seems a bit of a shame, being an Apple fan that the shop is quickly turning into just another electrical superstore. Anybody got a clue as to how I can get an emailed Receipt for £514.00.

    The online Applestore sorted it out.

  • I can't seem to remember my encryption password to back up my iPad? any suggestions?

    not sure how to reset or retrieve it

    Hi jcsoldier24,
    If you have forgotten the password for an encrypted backup of your iPad, you may be able to recover the backup using the steps in this article -
    iOS: Troubleshooting encrypted backups - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • HT201365 I have brought a second hand phone and cant activate it because i can not seem to get in contact with the previous owner.

    I sold my iphone 4s and added some money to buy a second hand Iphone 5, i can't get into the phone because i need the previous owners apple Id and password and theres absolutely no way I can cintact the previous owner because i had thier number on my iphone 4s which was sold before i brought the 5.

    Only the previous owner can unlock your phone, either by providing you with the code or by removing it from his liste of devices. I'm afraid that if you cannot contact him your phone is useless.

  • I'm operating OS X 10.8.5, Mail 6.6, and I can't seem to extract jpgs or pdfs from within an email thread.  Any suggestions as to how I can retrieve these files?

    I"m operating OS X 10.8.5,  Mail 6.6 and have discovered I can not extract jpgs from within an email thread.  If I catch it upon arrival, everything's fine, but if I reply and continue the thread, the file is no longer extractable.  Any advice?
    Thank you,
    April Snow

    Thanks Eric,
    I would try that if I could see the jpeg file.  The problem is that once the original email has been responded to, and the thread continued, the jpg files disappear from the body of the original email.  Hmmm.  They must be there somewhere, but I can not locate them.

  • Snap to beat markers:  I'm using iMovie 11.  Trying to prepare short movie of holiday using 2 or 3 songs and snap to beat feature.  It worked great for first segment/song but I can't seem to get it to work for the second song.  Help please.

    I'm using iMovie to prepare a short holiday video.  Snap to beat markers worked great for the first song but doesn't seem to work when I try to extend my project with a second song and more video and stills.  I dragged in the song and marked the beats but when I bring in stils and video clips they just ignore the beat markers.  Can anyone help please.  Thanks.

    I am having the same issue. The first song and beat markers work great. I add a second song and set beat markers. When I add photos, the appear at random spots with random lengths. I haven't seen a pattern yet. Spent 30 minutes on this topic at my last 1:1 session in the store. No luck figuring it out.
    One work-around might be to create one song per project (so beat markers work), then combine the two (or more) projects. But I'm not sure if that's possible or how to do it.
    Thanks for any help on this.

  • HT3500 I have a MacBook Pro and an HP ENVY 110 SERIES All-In-One .  I can't seem to get a network set up or either one to locate or connect to the other one.

    I've spent hours, actually probably days, trying to do this but it's not working. I've had the ENVY since Nov
    and have not been able to print - much less do anything else with it.
    My internet is CLEAR wireless. I use the little USB 4G Mobil Modem. This new HP ENVY is also wireless.
    I know I can't be online and print at the same time unless I get a router.
    I also know that I can go offline and change the network pref  to "airport" so I can print. Meaning I'll have to change
    back and forth but for my uses,  that's ok..at least for right now.
    What I can't seem to get set-up correctly is my own local network.
    I'm pretty sure it's suppose to be done using "Airport".
    Obviously, I'm doing something wrong in establishing my network.
    The printer is listed on my printer preferences and shown as  "offline"  "default". I assume that means the ENVY
    is my default printer.  Great! At least my Pro knows it's suppose to connect to the ENVY once everything's set-up correctly.
    Now, if someone could just tell me exactly, step-by-step what to do to get that done....
    I'd be soooo very happy!
    Thank you!
    Ricki

    Well... no help was found here.. so I abandoned the wireless- ness of my printer.  I bought a
    small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
    and any kind of printer.   I also bought a long USB cable.  I now print--wired since this can be done
    as an alternative to wireless with this printer.   Because I don't want a cable "hanging around"
    when the printer is not in use, I simple disconnect it and reconnect when I want to print.
    It's a temporary solution others may find helpful as well. Apparently there's been a lot of
    confusion and problems getting this printer set up wirelessly with our MacBooks.
    Shame on HP for not helping us out!

  • TS3276 i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?

    i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?

    It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
    Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895

  • Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience

    Ver 8 installed fine but can't get it to launch from any application. Have tried going back to earlier versions (6.1,6.2,7) but the same problem occurs.
    Same error message each time:
    "Adobe Reader 8.0 has encountered a problem and needs to close. We are sorry for the inconvenience"
    AppName: acrord32.exe AppVer: 8.0.0.456 ModName: acrord32.dll
    ModVer: 8.0.0.456 Offset: 00020916
    Tried every troubleshooting tip in the Support Knowledgebase to no avail.
    Have been using Reader for years with never any problems and now I can't seem to get this fixed after numerous hours.
    Any suggestions would be appreciated. Is there a free support line I can call or is it paid support only?
    Thanks,
    Dee

    Like others my problem was Adobe Reader 8.1.2 died terribly and with a buggy stench with the following error:
    AppName: acrord32.exe AppVer: 8.1.0.137 ModName: msvcr70.dll
    ModVer: 7.0.9466.0 Offset: 000013d6
    RESOLUTION ON XP SP2
    1. Control Panel, Users
    2. Create a new user account NewUser (for example)
    3. Start, Log Off
    4. Switch Users to the NewUser
    5. Wait the mini eternity for new user to be set up.
    6. Start Adobe Acrobat 8.1.2 and you will see a red splash screen along with some license updating things.
    7. Adobe 8.1.2 now starts fine under NewUser
    8. Switch back to your regular user name. Start, Log off, Switch Users
    Now a note to Adobe. Do you folks really have to make this such a frickin pain to get working? Do you at Acrobat have any idea of how much time we users blow and how much of our lives pass by while we try to re-download and work with this product? You are directly responsible for a small slow down in the world economy by this. Get the hint.... create an 8.1.3 that omits the secret code steps above.
    The only thing that kept my sanity during this were nice songs on channel 86 on SIRIUS. Thank you SIRIUS.
    Thanks,
    Jim

  • "(program).exe has encountered a problem and needs to close. We are sorry for the inconvenience."

    Hi, I was using Tweetdeck for the past few months without any problems. Recently, the application still works fine.. it opens as normal, all posts I am following appear etc., but when I try to send a tweet the application closes and I get the error
    "tweetdeck.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    I uninstalled tweetdeck and reinstalled it many times. Sometimes it would work for twenty minutes, other times not at all. I got fed up trying, so uninstalled it and downloaded Seesmic. This new application opened perfectly, all users I am following and their tweets updated perfectly, until again I went to post a tweet and it closes and I get the error
    "seesmic desktop.exe has encountered a problem and needs to close. We are sorry for the inconvenience."
    As these are the only two applications I have used that give me this error, and are also the only two applications I have used that are related to Adobe AIR, I can only assume the problem is connected somehow?
    I was wondering if any of you might have any suggestions on how I could fix this? I am not the most tech saavy guy, so any help would be greatly appreciated as I am starting to lose patience with it!
    Thanks in advance.

    You might try uninstalling the AIR runtime and re-installing it. You might also try contacting the developers of these applications to find out whether the problem is related to issues they already know about.

  • Reader 9 causes message "Internet Explorer has encountered a problem and needs to close.  We are sorry for the inconvenience." whenever a tab is closed.

    After installing reader 9, Internet Explorer gives the message: "Internet Explorer has encountered a problem and needs to close. We are sorry for the inconvenience." everytime I close an internet window. If I remove reader 9, the problem no longer occurs. Reinstalling reader 9 causes the problem to return. I got rid of reader 8.1.4 because it was not working properly. Any suggestions about this issue?
    OS - Windows XP Pro

    This could some problem with you Windows OS. check for viruses or like.
    -Prasanth

Maybe you are looking for

  • FileVault asking for old account password when upgraded to Mountain Lion

    This is not good. I recently updgraded to Mountain Lion. After the upgrade process, my account log in no longer was accepted by FileVault. (FileVault Legacy) The system is stating that: " Your user accont password is different fomr your FileVault Pas

  • Convert physical standby to logical

    Hi everybody!! This is my first message on this forum, altought i have been reading few time before (around 4 months) I have a "problem" in my database environment. I must change a physical standby to a logical standby. This cahnge is possible with d

  • Video doesn't synch, missing podcasts, ipod songs skip...

    Forget about the the sound quality - I can't even get videos and some music to play. Have reset three times (as instructed by Apple website) but clearly the problem is iTunes v7. Hopefully damage can be fixed with an update - anyone heard of when to

  • Assigning a host name in the router

    How do you assign a host name to a device that was discovered with a static IP address? Router is a mi424wr-gen3i .

  • Active Standby Plugin - E61

    I don't have Active Standby Plugin (Tools/Setting/Phone/Standby Mode) option in my Nokia E61. What shall I do to get it ?