I have to reopen the scan program after each picture is saved.

When I scan a picture using the HP Solution Center program, it forces me to Save and Finish after each scan and then I have to open Solution Center program all over for each picture.  The older version allowed me to scan and save a picture but left new scan window open to preview and scan the next picture placed on the flatbed.  How do I scan multiple pictures, each with its own file name, without having to restart the program for each and ever picture. The solution center run on a laptop that still has Vista on it will allow the multiple scans. The same program run under Windows 7 does not.

Hello again Multiscanner,
I have located two documents that I think may help with the issue at hand.
Please click the following links for The Product Does Not Function Correctly After Reinstalling on a Network and Upgrading from Windows V...
The second link is for Resolving HP Solution Center Scan and printer Status Issues After Upgrading From Windows Vista to W....
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you once again for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

  • After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

    After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
    Can anyone recommend a solution?

    If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
    My Acrobat version is 11.0.10
    I am running Windows 7 Professional with Service Pack 1
    My Internet Explorer is Version 11.0.9600.17691
    Update Versions 11.0.17 (KB3032359)
    I am running Microsoft Office 2013

  • I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

    I've made a photo book, but ordering this iPhoto crashes and I have to reopen the program; done this several times and each time uploading the 3rd page (of 86) it crashes again. My software is up to date (9.2.1), so that is not the problem.

    Try boot into Safe Mode and try again.

  • HT201276 hi I was unable to quit Safari on my laptop it is buffering but it is not closing i have re-started the laptop but after re-start the laptop safari is not closing still it is buffering

    hi I was unable to quit Safari on my laptop it is buffering but it is not closing i have re-started the laptop but after re-start the laptop safari is not closing still it is buffering
    Please help me

    Force Quit Safari.
    Press command + option + esc keys together at the same time.
    Wait.
    When Force Quit window appears, select Safari if not already.
    Press Force Quit button at the bottom of the window.
    Wait.
    Safari will quit.
    If this does not help, press the power button for 7 or more seconds.
    Computer will shut down.
    Restart.

  • I have nothing in the "Scan to" menu in "Scan Settings" in Solution Center.

    Hi
    I have a Photosmart 2575 All-in-One printer/scanner which I have had working under Windows Vista Home Premium operating system on a Dell Dimension E521 for several years. The other day I suddenly received messages that Solution Center could not detect any HP devices. I have not installed anything new apart from automatic updates to the o/s and McAffee protection. I thought the solution might be to reinstall - which I did. Now, in Solution Center, I have nothing in the "Scan to:" menu in "Scan Settings". The suggested solution is to uninstall and reinstall - which I did to no avail. I also ran the HP Scan Diagnostic Utility - same recommendadtion! Any ideas? Thanks

    Hi there rjbawden,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I have lost all the contact numbers after restoring my iphone.how do i get it back?

    i have lost all the contact numbers after restoring my iphone.how do i get it back?

    Contact iTunes support & request they add the lost music to your iTunes download queue:
    http://www.apple.com/support/itunes/contact.html
    Apps, you can re-download for free.

  • I have downloaded ios7.1 but the folders and the bar below have a grey color not transparent or even a blur color like all the iproducts (i have iPad 3) the problem was after the iOS7.1!! What shall i do?

    I have downloaded ios7.1 but the folders and the bar below have a grey color not transparent or even a blur color like all the iproducts (i have iPad 3) the problem was after the iOS7.1!! What shall i do?

    The following line tells me that this is not a template file, but a document created from a template called index.dwt
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    This means that you saved a child document as a template file at some stage.
    If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

  • The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    The wifi has been lost or disconnected on my iPad. It's the iPad 2 and has not been updated yet. It's IOS 6.1.3 .. how do I add a network back onto it? I have typed in the name and chosen each of the securities and still hasn't connected!

    Hey there Luba_kalstad,
    It sounds like you are unable to join your network and cannot see it in the Wi-Fi list in Settings. I would try the troubleshooting outlined in this article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section down toward the bottom if needed:
    Unable to locate a Wi-Fi network
    Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
    Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
    If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
    Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I'v just installed creative cloud 64 bit windows. How can I make bridge the default program to upload pictures rather than lightroom?

    I've just installed creative cloud 64 bit windows.  How can I make bridge the default program to upload pictures rather than lightroom?

    Usually the default program associated with an image file extension is an image developing Program like Lightroom or an image editing program like Photoshop. If you want to change the default associated program to Adobe Bridge you would use Window's Controls Panel file association applet.

  • Need to get the exact time of each picture that I saved ( maybe as a excel sheet or word )

    Hi guys,
    I am actually a new labview user. I have successfullly been able to save pictures. But unfortunately I got two problems. The first one is that I need to use two cameras at the same time. The program I have so far is for one camera. The second problem is that I need to get the exact time for each picture saved in the profile.
    I would appreciate if someone can help me with that. Anyway plz find attached the subvi.
    Regards,
    Abbas
    Attachments:
    Abbas progress.vi ‏54 KB

    Hi Abbas,
    First, I notice that you are using IMAQ for USB.  Is there any particular reason you are not using IMAQdx?  This is the newer, supported driver for use with USB cameras that supports acquiring from multiple cameras at the same time. 
    Check these two articles:
    Can I Acquire from Multiple USB Cameras Simultaneously Using IMAQdx?
    Can I Acquire from Two USB Cameras Simultaneously with NI-IMAQ for USB Cameras 1.0?
    And also this example (if you camera does not support acquiring from multiple cameras at the same time):
    Toggle Between Multiple USB Cameras
    As for timestamps, some cameras output them with the frame timing.  However, usually this is not a feature of USB cameras; if it is not, you can look into timing options within LabVIEW.  Try playing with the property node for IMAQdx and the Acquisition Attributes.
    Cheers,
    Marti C
    Applications Engineer
    National Instruments
    NI Medical

  • After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

    New computer.
    After download and installation of PS PE12
    I have problems starting the programm, double clicking on the icon.
    After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
    (expected was to activate the program and the sarting the PE12)
    PSE12 runs fine
    System:
    WIN8.1 / i7 /16GB RAM

  • How can I control where in  iPhoto my scanned photos will go? Right now they go to the very top of all the photos I have and I have to scroll the scanned photo  all the way down through 12,000 photos.

    I'm scanning photos to my iphoto . After they are scanned I find them at the  beginnoing of my iphoto collection and have to scroll them down through 12,000,,photos. Is there any way I can control where the scanned photos will appear in iphoto?

    You are asking about scanning photos to iPhoto on your Mac, right? This is the "iPhoto for IOS" forum, not the "iLife iPhoto" foruum for iPhoto on a Mac. Next time better post directly in the iLife forum - you will find more helpers there.
    have to scroll them down through 12,000,,photos
    Where do you look for your scanned photos? In the "Photos" view of the source list? I'd suggest, you look in the "Events" section. If you scan directly to iPhoto (assuming you use "Image Capture"), your scanned images will appear in the "Events" as "Unknown Project", and the events are sorted according to the settings in the "View" menu, "Sort Events" (assuming you are using iPhoto 9.x.x)
    If you want them to appear in an event with a specific name, don't scan directly to iPhoto. Direct the scanned images to a folder, and then import this folder to iPhoto. Then the photos will be imported into an event with the name of the folder.
    Regards
    Léonie

  • Why do I have to click the go button after typing a URL? Before FF6 I could just hit enter.

    I just recently updated to Firefox 6. Before the update, I was able to type a address into the URL bar and hit return. Nice and easy. Now if I do this I get no response. To direct to a web page I have to move my cursor to click the go button. It's annoying and a waste of time. What happened here? Any way I can change things so I can just hit enter again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4+ you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I need to reload acrobat 9 (was an upgrade) do I have to reload the original program?

    i need to reload acrobat 9 (was an upgrade from 8 from....back to original program acrobat 5) do i have to reload the original?

    no.
    when installing an upgrade, if the previous version is not installed, you will be prompted for the previous versions serial number (as well as the upgrade's serial number).

  • Calling the selection screen of the calling program after the execution of

    Hi all,
    I had created a program for a purchase order display.
    It has three radio-buttons from where i am calling different programs.
    I am using submit in the calling program and get parameter in at selection-screen output of the called program.
    I am getting the end report without the display of the selection screen of called program. But when i am clicking back on the end-report then i want to come back on the selection screen of the calling program. But i am coming out of the execution.
    Can anyone please tell me how to call the selection screen.
    Thanks in advance,
    Regards
    vamsi

    Hi, when you do the SUMBIT statement, make sure that you are using the extension........  AND RETURN.
    Submit <report> <b>AND RETURN</b>.
    This should return control to the caller.
    Regards,
    Rich Heilman

Maybe you are looking for