I hear my rearspeaker in the front (spdif) - Whats wrong???

Hi,
mein Problem ist folgendes. Meine Boxen sind per spdif angeschlossen. Ich hre beim Creative-Boxentest, die Rearspeaker auf meinen Frontspeaker. Also z.b. "hinten Rechts" hre ich vorn rechts.
Wo kann ich das deaktivieren ohne die Rearspeaker zu deaktivieren, da diese ber Analog weiterlaufen sollen.
Erog was mache ich falsch?
Das ganze ist Windows 7
my problem is this. My speakers are connected via spdif. I hear the Creative-box test, the rear speakers on my front speakers. So for example "Rear Right" I hear the front right.
Where can I turn off without the rear speakers turn off, as this will continue for Analog?
Eroge what I'm doing wrong?
The whole thing is Windows 7
Greetings & Thanks

Hi Zez
ich nutze die X-Fi XtremeGamer Fatalty Pro Series. Angeschlossen ist die an mein Harman Kardon. Dieser ist ein reiner Stereovollverstrker (HK990).Am Rear hngen nur einfach akti've Desktop-speaker.
Ich dachte nur, das das SPDIF eh nur Stereo kann und man parallel den analogen Ausgang nutzen kann.
Der l?uft auch nur leider (wie gesagt) landet das Rear auch auf den SPDIF.
Es geht mir nur ums Zocken. Ich m?chte auch meinen, das ich das unter dem Modus "Unterhaltung" hinbekommen habe... Bin mir da aber nicht so ganz 00pro sicher
Gr?sse

Similar Messages

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • The update itunes update software box comes up when I open itunes, I click to download the box disappears and it never starts the download. Whats wrong?

    The update itunes software box comes up when I open itunes, I click to download, the box disappears and it never starts the download. Whats wrong?

    You might not have enough space left on your hardrive.

  • When people call, they got a busy tone even though i do not use the phone. Whats wrong

    Question: when people call, they got a busy tone even though I do not use the phone. Whats wrong?

    Hey rolffsweden,
    You might have Do Not Disturb turned on - I would check that first:
    To enable/disable, tap Settings > Do Not Disturb. When Do Not Disturb is on, a "moon" icon will appear in the status bar.
    or
    You can enable/disable Do Not Disturb in Control Center.
    from: iOS: Using Do Not Disturb
    http://support.apple.com/kb/HT5463
    Welcome to Apple Support Communities!
    Have a great day,
    Delgadoh

  • My ipod audio only coming through the right headphone whats wrong?, My ipod audio only coming through the right headphone whats wrong?

    Ive tried with mulitple headphones but my audio on my ipod is only coming through the right headphone. Whats wrong with my ipod? WIll I need to purchase another one?

    I don't know if this is a common issue: I bought an iphone from someone and notice that only the plug design of the stereo headphone that comes with it fits in its receptacle. I tried others that are generally for the same size but they can't go deep enough in the receptacle thus can't get any audio. One thing I noticed is that this iphone's receptacle is deeper in the device than usual, so any other plugs other than the one provided can't fit. I can't use my external speakers with it!!! I fail to understand this. All all iphones like this or is it a defect particular to mine? After all, my ipod touch doesn't have this issue! If anybody knows, please tell me.

  • Ipad will not turn on or do anything. I have the new Ipad.Whats wrong?

    Ipad will not turn on. I have the new Ipad. Whats wrong? Its only about 2 months old.

    Assuming that the battery isn't empty (and it can take up to 15 minutes of charging before it will respond), then have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4528 my iphone suddenly says iphone is disabled on the screen and says connect to iTunes account across the front screen, what do i need to do so it will work again??

    i am trying to get my iphone 4s to work again, it suddenly showed up across the screen that iphone is disabled connect to itunes.. so what do i need to do to get it working again?

    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • When i plug in my ipod touch to charge it starts with the battery with the little bolt under it then it goes to the apple logo screen and after a while it flashes white and just shuts off and restarts the process. Whats wrong and how do i fix it?

    when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?

    See if you missed anything here:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Whenever I connect my iPod touch 5th generation to the charger and turn it on, my touch sensor seems to stop working so I cant unlock my iPod without having to take out the charger. Whats wrong with it?

    I got this iPod about 3 weeks ago. Whenever I connect my iPod to the charger the touch sensor seems to stop working. When my alarm goes off in the mornings i have to unplug the charger to stop the alarm. I cant do anything while the charger is connected. Any ideas what the problem is or how I can stop this happening?

    A few other users have report the same but I have not heard of a solution. Y can try:
    - Another cable
    - Another USB port
    - A wall charger
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.                     
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • I cant get any artwork from tv-series to sync over to my ipad mini, its only gray and the name av the tv-serie, whats wrong ?

    As i say in my ipad mini its only grey pictures as artwork for my tv-series, its no problem with, musik, books or movies only tv-series, what do i do wrong ?

    Demo,
    Thanks for tossing out ideas.  I am getting to the point my memory is not bad or is it they are changing the software daily to include and drop options...
    I just tried to sync a single tv episode.  It did not sync it,  but oddly enough it does recoginze that it is selected, because wihen I undelect it after a sync, i get an apply button as if uncheck it is making a change.  But space available does not change either way, nor does anything end up on the device.
    Do not think too hard on it, it is not a "rush" item, just an annoyance with the software does not work as one would expect it to.

  • TS2634 i have a ipad gen1 refurbished the wall usb charger keeps saying charging is not supported with this accesory and has taken 24 hrs to charge half the battery and this is a factory charger that uses the usb port whats wrong here help please

    i just purchased a refurbished ipad gen 1 when i pluged in the wall charger with the usb cable a window came up and said (charging not supported with this accesory) the battry was almost dead so i pluged in the wall charger and
    the battery has been charging for 24 hrs and is only 50%charged it is the factory use charger for this unit why does this error come up and why is it taking so long the software is up to date

    Not normal. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • I get the error 1120, whats wrong?

    <?xml version="1.0" encoding="utf-8"?>
    <mob:ScreenStackApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
       xmlns:mob="openplug.elips.controls.*" xmlns:screen="openplug.elips.controls.screenClasses.*" creationComplete="init()">
    <mx:Style>
    .myStyle
    color-scheme: blueStyle;
    </mx:Style>
    <mx:Style source="variantstyle.css"/>
    <mx:Script>
    <![CDATA[
    import mx.controls.Label;
    import openplug.elips.controls.Alert;
    [Bindable]
    private var myCollection:ArrayCollection = new ArrayCollection(null);
    private function completeHandler(event:Event):void {
    var loader:URLLoader = URLLoader(event.target);
    var xml:XML = XML(loader.data);
    for each (var tag:XML in xml..Country) {
    var myLabel:Label = new Label();
    myLabel.text=String(tag..Country_Name) + ": +" + String(tag..Country_Code);
    myLabel.height=height*10/100;
    myCollection.addItem(myLabel);
    actReq.stop();
    actReq.visible=false;
    Here is something wrong
    private function errorHandler(event:IOErrorEvent):void {
    Alert.show(event.toString(),"Connection Error");
    actReq.stop();
    actReq.visible=false;
    I get the alert on the alert.show .
    private function init():void {
    var urlLoader:URLLoader = new URLLoader();
    urlLoader.load(new URLRequest("http://developer.openplug.com/twitter_app/country.xml"));
    urlLoader.addEventListener(Event.COMPLETE,completeHandler);
    urlLoader.addEventListener(IOErrorEvent.IO_ERROR, errorHandler);
    ]]>
    </mx:Script>
    <!-- Screen definition, you can have several screens in a screen stack -->
    <mob:ScreenView id="myFirstScreen">
    <!-- Soft Key Button Bar, will be visible on Windows Mobile and Symbian -->
    <mob:softKeyBarDescriptor>
    <screen:SoftKeyBarDescriptor leftAction="Left" rightAction="Right"
      leftActionClick="trace('LEFT')" rightActionClick="trace('RIGHT')"/>
    </mob:softKeyBarDescriptor>
    <!-- Navigation Bar, will be visible on iPhone -->
    <mob:navBarDescriptor>
    <screen:NavigationBarDescriptor title="My Screen" leftActionClick="trace('LEFT')" leftAction="Left" styleName="myStyle">
    <screen:rightAction>
    <mob:ActivityIndicator id="actReq" width="30" height="30" autoStart="true" color-scheme="light"/>
    </screen:rightAction>
    </screen:NavigationBarDescriptor>
    </mob:navBarDescriptor>
    <!-- Menu Provider, will be shown when pressing MENU key on Android -->
    <mob:menuProvider>
    <mx:ArrayCollection>
    <screen:MenuItem actionClick="trace('item 1')" label="Action1"/>
    <screen:MenuItem actionClick="trace('item 2')" label="Action2"/>
    <screen:MenuItem actionClick="trace('item 3')" label="Action3"/>
    </mx:ArrayCollection>
    </mob:menuProvider>
    <!-- Tab Navigator with two tab pannels -->
    <mob:TabNavigator id="mainTab" width="100%" height="100%">
    <mx:VBox width="100%" height="100%" horizontalGap="0" verticalGap="0" horizontalAlign="center" verticalAlign="middle" label="Tab 1">
    <mob:List id="myList" dataProvider="{myCollection}" rowHeight="30" width="100%" height="100%" />
    </mx:VBox>
    <mx:VBox width="100%" height="100%" horizontalGap="0" verticalGap="0" horizontalAlign="center" verticalAlign="middle" label="Tab 2">
    <mx:Text width="100%" text="{'This is my first application for ' + openplug.elips.device.Capabilities.getDeviceCapabilities().model}" textAlign="center"/>
    </mx:VBox>
    </mob:TabNavigator>
    </mob:ScreenView>
    </mob:ScreenStackApplication>

    haack5 - Which exercise are you referring to?

  • My computer won't turn on, it just stays on the blue screen, whats wrong?

    This has happened before, but the problem was supposed to go away. A window pops up randomly and says "start-up disk is full" and i just click "OK" and move on. But then today i turned off  my computer and about 30mins. later I turned it back on and it got stuck on the blue screen. WHAT DO I DO?????

    Reboot holding the Shift Key down and target some large files like Movies to copy to a external storage drive, then delete them from the boot drive and reboot a couple of times so OS X realizes there is new space available and boots normally again.
    See #7 here
    Step by Step to fix your Mac
    See "Storage drive" here
    Most commonly used backup methods explained
    If that doesn't work then do this
    Create a data recovery, undelete boot drive

  • How can i print an excel spreadshee​t file by clicking a button on the front panel

    i have designed a vi that logs data into an excel spreadsheet. i want to take print out of the file when the user clicks a button on the front panel. what to do if there is very large amount of data.

    Preet,
    Printing the Excel sheet is just an ActiveX method call to print the worksheet. To add data to the worksheet, you already have the reference, just call a print method. As for handling large amounts of data, that is a vague question. The data will print how ever you placed it on the worksheet. If what you mean is that you don't want to print out 25 pages every time, the print method has options to only print specific pages or ranges. You may want to play around with a sample spreadsheet to learn the printing options. For help on the ActiveX functions, make sure you have the Visual Basic help installed for Excel.
    Randy Hoskin
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Moving to the Front

    Mine is
    MacBook Pro (Retina, 15-inch, Mid 2014)
    10.10.2 (14C109)
    2.8 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    500 GB SSD
    NVIDIA GeForce GT 750M 2048 MB
    Forgive me for asking a dumb question.  I don't use my computer like most.  I might have three windows of Numbers open, two windows of Pages, two of Safari, To-Do List, Contacts, and Mail at one time.
    Is there some reason why when I start a new copy of any application that it does not appear in the front?
    I am certain there is some esoteric Apple method engineered into MacIntosh years ago and everyone knows it except me.
    Anyone care to let me in on the secret?

    Is there some reason why when I start a new copy of any application that it does not appear in the front?
    What is a "new copy of an application?"
    If you mean a new document in some application, I have no idea why yours do not appear in the front. Mine all do.
    Did you install any utilities that "help" you not use your computer like most? That may possibly be interfering with the normal behavior that is experienced by most people.

Maybe you are looking for