I just can't get it to work :-(

I was given this code and found another only slightly different. I've seen them both working but when I try to put it on my page, it doesn't matter what I do, I can't get either to work. The problem is not with the code but with the service I'm going through (addr.com). If anyone is willing to help me figure this out through email, I would be very appreciative.
<APPLET CODE=PoolMenu WIDTH=570 HEIGHT=65>
<PARAM NAME=image VALUE="images/logo.gif">
</APPLET>
<applet code="PoolMenu" CODEBASE="files/" id="PoolMenu" width=468 height=60>
<param name=image value=images/logo.gif>
</applet>
[email protected]

images/logo.gif does exist at
www.holidaysportsinc.com/images/logo.gif
The PoolMenu.class is hard to explain. They have
given me this address to view their test servlets -
http://holidaysportsinc.com/servlets/TestServlet
-- which reveals that they don't know much about what you are doing...
First you have an applet which is run on the client. Then they give you a servlet container, which is used to run server side application written in Java.
Something's not right here...
My .class file is placed into the servlets/holidays
folder. This is where they told me I had to upload my
own java/class files but I can't seem to get to it.
By going to this address -
http://holidaysportsinc.com/servlets/holidays/PoolMenu
class
I get a "The requested URL /servlets/holidays was not
found on this server."Is it there, then?
I've even tried putting it into just the servlets
folder but I get the same message.It shouldn't make any difference where the class file is, if you set the codebase and code attributes properly in th html.
Just slap it somewhere on the server and give the path to it in codebase. Like if you have the .class in /foo/bar/Baz.class codebase should be "/foo/bar/" - and code "Baz".
>
I've tried writing them about it and they recommended
I come here for further help because they don't deal
directly with the java/class files, they only supply
the server to do it on. I am at a loss.And so are they :)

Similar Messages

Port 8080: I know this is simple, I just can't get it to work.

I'm trying something that I'm sure is relatively simple. But I just can't get it to work. I have OSX Server 10.4.10. I currently have my company site (www.example.com) hosted on it. But I'm trying to get another site hosted on it at port 8080. When I enter my company domain, www.example.com:8080, the page can't be displayed. But when I enter the IP address, such as 192.168.xxx.xxx:8080 from within my network, the correct site shows up. How can I get a website displayed at port 8080 from outside my network? I'm running DD-WRT on my router and have ports 80 and 8080 directed to the IP address of my server.
Thanks in advance for any help.

Hi WiFiNetGuy-
I am a tad confused, which isn't new, but I need to get a grasp on exactly what it is that you are trying to do.
Do you have both websites (i.e. www.example1.com and www.example2.com) both pointed at the same ip address? How many unique domain names and ip addresses are we talking about?
From what you describe it sounds like a routing issue but I need more info (:>)
Luck-
-DaddyPaycheck

Album artwork.... just can't get it to work right.

Hello.
I've searched google, I've searched this support community and I've just not been able to come up with an answer.
My album artwork just won't stay put. Some of my albums have artwork and some don't. I've done the "right click" and "get album art work". I've downloaded an app to find art work for the drag and drop method into the "Now Playing" window but it just gets eaten by Itunes (it appears in the window and magically disappears). I've even done the "get info" on multiple tracks and drag and drop into the "artwork" window of the info pane and while it sticks and stays put nothing happens when I press ok only to reopen the info pane ( "get info" on multiple tracks) and it's as if I've done absolutely nothing. My permissions are fine. My music files are a mixed bunch of MP3 and WAV but this isn't a factor as some MP3's have artwork and some don't, as well as my WAV's.
I've searched in and out, high and low but I've just not come up with anything that gets this in order. The problem isn't getting the artwork it's getting Itunes (10.5.1) to attach it to the albums and display it. My Mac OS X is Lion 10.7.2. Can anyone help?
Thanking you before hand.

Looks like it does have something to do with WAV format. I got the missing artwork on the MP3's working (by simply dragging and dropping...don't know how that didn't work before) but it's true that the WAV format does not support artwork (as stated several time here in this support community). What threw a brick in all my thinking is that some of my WAV's do have artwork. After some searching though I deduced that the WAV's with artwork showing are albums you can obtain from the itunes store while those that you can't don't show. Even some of the albums that I I copied in WAV that you can obtain from the Itunes store but have minor differences don't show artwork (eg. itunes sells the extended track album while i have the original length album)
I find this rather silly to be honest since there is a work around. I guess the question now is, where is itunes storing the artwork for the WAV files that do show artwork and can I tap into that so it does show for those WAV's missing the artwork?

Just can't get it to work!

I purchased a 1TB External HDD a few days ago, and after reformatting and trying over and over only to keep seeing the "Calculating Changes" bar, I decided to return the HDD thinking it was broken somehow.
Now I have a 2TB external HDD, I have formatted it as journaled, checked its permissions, and it is still stuck on "calculating changes" and I'm so frustrated I'm about to throw my Mac out my window. -_-;;
I have almost no space left on my 250GB drive, so I want to back up my HDD and do a complete reinstall of OSX and then transfer some files onto my external drive.
I have tried all the tricks found from doing research for this problem for hours, and nothing works.
Any suggestions? I appreciate them all!

I have almost no space left on my 250GB drive
That very well could be the source of your problems. When free space on the boot drive gets too low, performance begins to lag, and if it gets low enough, your machine can start doing strange things, crashing and even become impossible to start up.
so I want to back up my HDD and do a complete reinstall of OSX and then transfer some files onto my external drive.
As Pondini says, what you appear to want to do is extremely unsafe. You should not be storing originals on the backup drive. Just because they are on the backup drive does not mean they are backed up; they are not, if there's no copy anywhere else. Further, it's not a good idea to use a backup drive for everyday tasks (other than backup).
If replacing your internal drive with a larger one is not an option, you need to get another external that can hold the "overflow", and back up both that and the internal onto the 2 TB drive. Also note that having only one backup is only a bit safer than having none at all... you really ought to have a minimum of two completely separate backups, made with two different backup programs. See my [Mac Backup Guide|http://www.reedcorner.net/guides/backups> for more about this kind of thing.

The rotation has stopped working on my iPad2 whilst I was using Skype. I have tried all settings and lock/unlock buttons but just can't get it to work.

The rotation feature on my new iPad 2 has suddenly stopped working. I was on Skype.
Shop guy (who didn't seem to be an Apple specialist) simply said it "oh the sensor has gone - sent it back to Apple"
Any one else had this problem? Any solutions?

When following Eric's instructions, ignore the "Slide to power off" verbiage if it appears.
This procedure will not result in loss of apps, data or settings.

I keep getting an error about plug -in container. I have uninstalled and intalled adobe and I just can not get it to work

I have uninstalled both adobe and mozilla. I have the crash reports contantly. I play facebook games and it mainly happens in farmville, which is where i spend most of my time.
I am just at the end of my rope here. The computer shops here do not support firefox and I would hate to pay and it still not be fixed.
I have an acer aspire pc and run windows 7.

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset network settings: Settings>General>Reset>Reset Network settings
- iOS: Troubleshooting Wi-Fi networks and connections

Can't get VLAN to work

Hello,
Maybe I'm missing something elementary.. this is my first time trying this out and just can't get it to work.
I've got an xserve on a netgear smart switch on port 13. The netgear is hooked up to two different networks (204.x.x.x via port 1 and 128.x.x.x via port 2), and I have 2 VLANs setup on the switch (vlan 1 has port 1 and port 13, vlan 2 has port 2 and port 13).
The xserve's interface that's on port 13 has a 204 IP and works wonderfully on the 204 network. I then tried to setup a VLAN via sys prefs network and that appeared in the network configs list, and gave it a 128 address. However, even with all the right settings, it won't show up at all on the 128 network.
Is there something basic that I'm missing?

Oh, thats not exactly what I meant
Basically:
The server serves Web and QTSS via 204 to the world via en0.
Then, there's 5-10 machines or so on 128 (and 1-2 on 204) that sync over 3TB of data to the machine via 128 (this sever is the only one we have on site that has raids hooked up to it, so its the central data storage so to say), so en1 is pretty much completely saturated between 12am and 8am (and during the day when there's a lot of new work going on). Originally we used to do this over the primary web interface and all the web traffic would suffer (and especially qtss... we'd start getting disconnected errors all over the place when we started up massive copies).
Half of the machines are 204's and the rest are 128's, which is why we want the ability for en1 to be able to talk locally to machines on either 204 or 128, without having to interrupt the main interfact (if that makes any sense). Does that seem like a sensical solution?
If it also helps visualize a bit:
I only have access to register 8 machines on the 204, and TONS on the 128, but im not allowed to serve .com traffic on 128. Technically, the 128 does talk to the 204 locally on location, but its done through a nasty switch and we dont see much higher than 10Mbps tops.

I just got a new computer with Windows 7 and all my songs were transferred to my new computer along with itunes. But I can't get it to work. I also tried downloading Quicktime and couldn't get it to download.

I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.

iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

you launch QT then go to its REGISTRATION

I just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer?

i just replaced my mac pro with an iMac and i can't get it to work with my epson stylus 3800 printer? i have downloaded the 3800 software three times and the imac keeps telling me there is no software to run the printer? Any help here?

Care to share which OS you are using?

I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix.

I have been using my apple tv to access netflix for several months. It suddenly stopped working. When I try to go to netflix from the menu, it says "accessing netflix" but never does. I can access you tube just fine, but just can't get to netflix. Any ideas. I have unplugged everything and waited but nothing helped.

Update software. If that doesn't work try resetting. Mine started working after the update.

IMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts?

iMovie wii no longer share with iDVD. I just upgraded to Yosemite 10.10.2 and now I can't get iDVD to work properly. Any thoughts? This is what comes up.....

iDVD does work with Yosemite although, as Kappy pointed out unsupported for 2 years, so try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/Preferences folder.
2 - delete the contents of IDVD'S cache folder: User/Home/Library/Caches/com.apple.iDVD.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
If you're running Mavericks or Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
If iDVD crashes again post the first 50 lines of the crash report. Don't post a screenshot but copy and paste the actual text.
To get a movie from iMovie to iDVD it should be exported out of iMovie as 480p and added manually to iDVD.

Since upgrading to Yosemite I cannot get directly to Netflix. I get a message about having to download Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

Since upgrading to Yosemite I cannot get directly to Netflix. I get a to Netflix and there is a big message about having to download/install Microsoft Silverlight. I can't get that to work and don't want it anyway. I just want to open Netflix and play the movies. What should I do?

I can't get that to work and don't want it anyway.
You need Silverlight. That is the application that plays the Netflix movies.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx

...I just bought this and i can't get it o work for me, I had noticed chat windows right up until I

..I just bought this and i can't get it o work for me, I had noticed chat windows right up until I Paid for it now I am left alone I need help. or my Money back. I knopw I am writing to no one.

Good day,
How can I help?
Kind regards,
David
Adobe Systems

I just bought the BDP-S1500 yesterday and can not get it to work via wireless

I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

Hi BigDaddy317,
Please the link below for further assistance in connecting your wireless device to the internet.
https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
Please let us know if you're getting the same result or the error messages that you see.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

I just can't get it to work :-(

Similar Messages

Maybe you are looking for