I just got a WD My Passport 1TB External Harddrive and i have already backed everything up to it but im still a little nervous about erasing things off the physical drive since it says my disk utility is out of space an implying i need to erase items.
I just got a WD My Passport 1TB External Harddrive and i have already backed everything up to it but im still a little nervous about erasing things off the physical drive on my macbook pro since it says my disk utility is out of space an implying i need to erase items.
I cant find the options to erase selected items it only shows that i can erase everything.
I mean technically i suppose i could erase everything an have a fresh start since its backed up to my external. But what exactly are the specific items being erased?
I have bought the newest OS X 10.8.2 an worried that it will get erased also an end up having to repurchase it.
Can anyone help me?
<Personal Information Edited by Host>
Black_Chevy07 wrote:
I just got a WD My Passport 1TB External Harddrive and i have already backed everything up to it but im still a little nervous about erasing things off the physical drive on my macbook pro since it says my disk utility is out of space an implying i need to erase items.
I cant find the options to erase selected items it only shows that i can erase everything.
I mean technically i suppose i could erase everything an have a fresh start since its backed up to my external. But what exactly are the specific items being erased?
I have bought the newest OS X 10.8.2 an worried that it will get erased also an end up having to repurchase it.
Can anyone help me?
If you are trying to delete some files get out of Disk Utility, it is not for that!
How did you backup and what are you trying to achieve?
Please post the exact error messages(s) you have received.
Similar Messages
-
i just bought an airport express. i set it up and was able to be detected by my macbook, but i still cant connect wirelessly. the same goes when i tried my iphone. please help!
Is the status light green?
Your Airport device may be in Bridge Mode.
Airport Utility 6:
Open Airport Utility, select the Airport Express and click Edit. Navigate to the Network tab and change Router Mode to DHCP and NAT. Then click Update on the bottom right.
Airport Utility 5:
Open Airport Utility and click Manual Setup. Navigate to the Internet icon and change Connection Sharing to Share a Public IP Address. Then click Update on the bottom right. -
We have a WD external harddrive previously used with a PC that we want to completely erase and reformat for use with our iMac desktop for use with Time Machine. The drive shows up on the desktop of the Mac, but it does not show up in Disk Utlity, assuming because it's Windows format. Outside of the standard "erase" feature in Disk Utility, is there any way to reformat this drive for Mac OS X? Or how can I get this drive to show up in Disk Utility? Note: The drive functions properly, has power, and we are able to view its current contents through the desktop icon, so it is a working drive. And we are ok with losing all the current data on the drive.
Hmm strange, I had just moved my external Lacie drive from my windows machine to my iMac and it was showing up in disk utility still formatted fat32 or whatever. I would disconnect the drive and restart the machine then replug the drive and try again.
Also not that it will make a difference ( I dont think it will but hey why not ) try accessing disk utility from the install disk? -
Just restored my iPhone 5 from iCloud. My wife and I have always shared one iCloud ID. But since my restore, when a call comes in, it rings on both my phone and hers. How can I make this stop? We had it all set up fine before the restore, and there was a trick to it in the settings. I've noticed that since my restore, her phone has picked up what looks like the symbol of a phone in the upper right corner of the display, right next to the Bluetooth symbol.
Hi Big Slick,
Welcome to the Apple Support Community!
It sounds like your iPhones may be using a new feature in iOS 8 called Continuity. The following article and information explains how to set up this feature for phone calls. You can review the information on the setup to reverse this effect. My suggestion would be to turn off FaceTime on one of the devices.
Connect your iPhone, iPad, iPod touch, and Mac using Continuity
Phone calls
With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
To make and receive phone calls, here's what you need:
Sign in to the same iCloud account on all your devices, including your Mac.
Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
All devices must be on the same Wi-Fi network.
All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
Cheers,
Joe -
I am trying to import mp3s from a lacie external hard drive onto my iMac. They were saved from a dell running windows. My iMac says "power pc not supported" when I connect the lacie drive. Any ideas here, I have about 25GB of music I'm trying to save. thanks
Do not move the music yourself.
http://docs.info.apple.com/article.html?artnum=301748 -
PLEASE HELP ME
Hi kaybrookeexo,
If you are having issues transfering your data from a prior iPhone to your new iPhone, you may find the following article helpful:
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/ht2109
Regards,
- Brenden -
No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
Repaired “Library/Preferences/com.apple.alf.plist”
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.As described in this article, don't worry about it:
http://support.apple.com/kb/TS1448?viewlocale=en_US -
I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.
I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
Disk Description : WD Elements 1023 Media Total Capacity : 500.11 GB (500,105,740,288 Bytes)
Connection Bus : USB Write Status : Read/Write
Connection Type : External S.M.A.R.T. Status : Not Supported
USB Serial Number : 575837314135304D36373132 Partition Map Scheme : Unformatted
As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply! -
Can´t delete a partition. Disk utility greyed out.
I have a problem. I can't delete or build a partition on my Macintosh HD. The options for deleting or build a partition are greyed out. I try to boot from a external drive and open disk utility, but still the same problem. I also tried iPartion but it don't work.
I have a iMac (late 2013) with 3 TB fusion drive on OSX 10.9.4Macs with Fusion drive use CoreStorage to manage disk objects.
You should use Terminale and command
diskutil coreStorage -
My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?
See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk -
Internal hard drives won't appear in Disk Util
I have a bizarre problem with my hard drives now. I'm on a 2.4GHz Core2Duo Macbook Pro 15" with 10.5.4. I've switched the hard drive a couple of times before with no issues whatsoever. Now, with the exception of the brand new one that won't hold an install, my internal hard drives don't show up in the install disk's Disk Utility.
I got a new hard drive to try the other day, installed it, booted to my OSX install disk to use Disk Utility. I switched the new disk to GUID and formatted it as journaled like usual. It took 4 hours to do the install, then after the restart it tanked. It booted back to the install disk where I checked it out. It could not repair the file system, and the drive was not "mounted". I mounted it, repartitioned and formatted it, and installed again. This time it stopped halfway through the installation and said the drive might be corrupt.
I unplugged the cable and battery, held the power button for over 5 secs, then just let it sit for about 10minutes with no power source while I thought about this. I put the original drive back in, booted into OSX, and put the new hard drive in an external USB enclosure. I formatted it while in OSX, then rebooted into the install disk and installed OSX on it while it was in the USB case. It took the installation more quickly (about an hour and a half...still not 20min like my old 7200rpm Hitachi 200g), then I booted into its OSX while in the USB drive. It booted ok, so I downloaded the updates and clicked to install them. It then went into a revolving restart. Eventually I decided it was not doing this because it was happy so I shut it off.
I swapped the hard drive out with another new one, and this one would not complete an installation while inside the computer either. It acted similarly while in the USB case. HOWEVER it would always show up as unmounted after a restart and would not recognize the drive inside the computer as a bootable disk.
I put my original drive in there to give up, and it gave me the ? folder. I booted to the install disk and it did not show up in the disk utility. I put my old hard drive in the USB case, booted to the install disk, and it showed that it was there, but unmounted and it could not repair the file system.
I repartitioned my hard drive (i have time machine working..not a huge setback) in the USB case and put it back in the computer. It still would not show up in disk utility. I put it back in the USB case, installed OSX onto it (in about 20min), restarted a couple times, saw that it was working, put it into my computer, and got the ? folder again.
I went out and bought a stardard 160GB SATA 5400rpm Seagate drive to try in there, and this fresh drive is not recognized inside the computer either when I boot into disk utility.
The brand new hard drive WILL show up in Disk Utility when I boot to it from the install disk, but it will not survive a complete installation.
So now I'm running OSX from my original hard drive in a USB case until I can figure out why the old disk recognized inside my laptop is the new hard drive upgrade, but it cannot complete an installation on it.
I'm originally a Windows slave, so I can only think in terms of AHCI or SATA-card drivers, or screwed up bios. But this is all pre-os-boot, and the apple firmware seems to be pretty automatic in picking the right settings to see stuff.I kind of feel like drawing a flowchart to show all that I've tried. Its difficult to keep everything intelligible while listing the entire last week's efforts at 2:45am. :-/
http://www.ocztechnologyforum.com/forum/showthread.php?t=41951
I also explained it here, perhaps a bit differently. Maybe some reply there might spark someone's memory of a possible problem. I understand the nature of computers (been 100% geek for 20 years), but I'm hoping there's someone out there with the specific Apple expertise to help me out. Eventually the processes I've taken and my specific situation will become clearer as the questions widdle away at this.
My original 7200rpm SATA drive that works fine won't show up when connected to the SATA cable. I've repartitioned it with HFS, and repartitioned it as free space in the USB enclosure. It simply won't show up in Disk Util. Same with the brand new test SATA drive.
The new SSD SATAII does show up, but after a 4hr install the partition is unmounted and won't show up as a boot option. I can boot to the install disk and repartition it, reinstall, or remount it. But it will never be mounted to be booted from while connected to the computer. I've had 2 of the SSD's to try, one survived one restart, then went into a never-ending restart cycle after I installed the updates. The 2nd has never successfully been mounted after the install to boot from. Now nothing can be mounted to boot from within the computer. I have to boot off of any of these drives from the USB enclosure.
If I install OSX on them while in the USB enclosure, that works, but they will not mount when connected to the SATA cable inside the lappy. The platter style SATA drives won't even be recognized...
Thanks for the instant reply, this is driving me nuts 'cuz it makes almost no sense. Thanks so much to everyone that contributes. I appreciate everything. -
Internal hard drive does not mount in disk utility
My internal hard drive no longer mounts in Disk Utility. It is grayed out. I have extraordinarily frequent spinning beach ball/freezes, in Safari or Apple Mail. The most recent symptom: upon rebooting or just starting up, I see flashing black on the display. This has been occuring for more than six months. Of course, I have made total and frequent backup's. I bought new RAM, but have not yet installed it, and I susect this might help. I have done repeted troubleshooting many times each: Apple's Disk Doctor, Repaired Permissions, Reinstalled the Mac OS, safe boot, Alsoft's Disk Warrior, Apple's longer Harware Test, etc. I have worked as a new user, too. All tests done report that all is well. What od you thnk the problem is? Must I drive 1.5 hrs. each way to the Genius Bar at my nearest Apple Store? Might I try to erase the hard drive as a fix? I hate to do this, only as a last resort, as it is so time-consuming. Should I just update my Mac OS? Please advise, out there, if anyone can offer any advice, I would be greatly appreciative.
The list of issues you posted probably would not get shorter if you attempt to 'upgrade them' away, as usually that kind of effort is not effective yet may expose more of the same problems while not necessarily revealing the original weakness. Another OS X installed over a set of problems seldom helps.
How full is the hard disk drive? If it is too full, or has been very busy in use several years, it may be time to replace the HDD and perhaps put a larger capacity one in the computer. And if the main computer hardware checks out OK (tested under a variety of duration and stress tests) then also consider a RAM upgrade if the device is not already at the maximum capacity.
When was the last time the hard disk drive was devoid of content, maybe wiped -- erased and reformatted by a third party disk utility or have a utility overwrite the entire HDD with zeros? This used to be a common tech service in the course of a major effort to restore a Mac. Or Defragment?
If you can do the latter, this could help resolve bad sectors and remove old data or corruption on the hard drive. Or get a new HDD and before committing a new OS X install & apps to it (or a re-clone of a complete backup) test the drive and be sure it is ready for use. Not all new drives are perfectly ready; some need to get exercise first.
I'd bet on a new hard disk drive of larger capacity (also note spin RPM rate and data speeds) and a full RAM upgrade.
If you have a backup clone on an external hard disk drive (in a boot-capable enclosure) you could really go to town and before you erase the main/only hard drive, make a backup clone and test its ability to boot the Mac. Or put the old drive and content in a suitable boot capable enclosure of the kind with its own power supply, and deal with it later.
Then consider a later version OS X -- whatever most recent version that model can support... {edited}
Good luck & happy computing! -
Does Secure Empty Trash Accomplish the same task as Running disk util to wipe free space
Does using the secure empty trash option accomplish the same task as running disk util to eliminate free space from old deleted files? I'm currently running the 7 pass deal on my late '12 iMac. Says its gonna take 7 hrs. Can I use safari or iTunes while the Big Mac works its magic?
Does using the secure empty trash option accomplish the same task as
running disk util to eliminate free space from old deleted files?
No.
Finder > Empty Trash just tells the file system that those areas on the drive are now available for overwriting with new data. Data deleted off hard drives can be recovered if this method is used before it's overwritten with new data with special software.
Finder > Secure Empty Trash runs a 7x pass military approved overwrite only on the deleted files in the Trash, works for hard drives only.
Disk Utility > Erase Free Space creates a huge file that takes the remaining free space on the volume selected and either writes zeros or 7x pass, then confirms it and then removes the file. Takes a long time to complete, do not interrupt.
This can be used if one forgets to use Secure Empty Trash or wants to scrub caches or other files that don't necessarily go to the Trash for user deletion, such as program files that self delete and download cache files etc.
Only works for hard drives and there is no recovery possible for nearly all users. Those with special expensive magnetic equipment can possibly recover data off a zero pass, but not off a 7x overwrite.
The zero erase free space can be also be used to pre-eliminate potential unknown bad sectors on hard drives before wanted data is written to them, thus preventing future issues with data retention on hard drives.
Disk Utility > Erase - (not moving the slider) will erase all data on the volume or partition selected, including wanted data. It just tells the file system the deleted data is ready for overwriting. Thus can be recovered using special software before it's overwritten on hard drives only.
Disk Utility > Erase w/Security Option - (or moving the slider from the left) will secure erase all data on the volume or partition selected, including wanted data.
It can vary on the operating system version used from zero pass, to 3x overwrite, to 7x overwrite to 35x overwrite (old version for days past of smaller drives, don't use on newer larger drives as it will take weeks to finish.)
Secure erase methods are used to secure erase private data off of hard drives only, doesn't work for SSDs.
For secure data deletion off a SSD or any flash media, it's NSA advised to grind it into a fine powder.
How do I securely delete data from the machine? -
Internal hard drive fails to mount in Disk Utility.
My internal hard drive fails to mount in Disk Utility for the past year, so I cannot verify it. However, it does mount in Disk Warrior. (1) I am concerned that it will not mount within the Apple software, and what that bodes for my computer. (2) I also have MANY spinning beach balls daily and have to use the power button to reboot. I just bought extra Crucial RAM and have yet to install it. Somehow, I don't think it wil help my issue # 1 though. Please advise, anyone out there! Thank you.
No, there are never any errors like that. Also, I have upgraded the Mac OS from 10.5 to 10.6.8. That did nothing. I backed up my Users = Christina folders to a good, 15 year old Firewire 800 La Cie 1 TB external hard drive. I also tested using the Apple Hardware test, which showed no problems, and Alsoft's Disk Warrior and defragged, and fixed a very minor issure re directory count, probably resulting from many improper shutdowns lately due to frozen spinning beach balls. None of these procedures alleviated the issues, and I still have the same issues: mainly that super-frequent spinning beach ball. Do you think I ought to install that new RAM sitting here finally? Perhaps it is a lack of RAM??I only have 2 lousy GB's of RAM after all! Thank you so very much for a reply.
Message was edited by: Flamingcreatures -
I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
******A true apple fan********Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
Bebers5
Maybe you are looking for
-
How to sort out different issues on Satellite A505-S6973
Can anyone tell me, if the warranty period on my laptop has not passed, can i return my laptop to toshiba and have all my issues sorted out. Would there be a cost to do whatever repairs software related needs be done and how i am supposed to go about
-
PHP- Oracle not working- Call to undefined function OCILogon() ERROR
Hi, I am trying to just do a test program to test php - oracle connection, My versions are: php5.2.1-Win32 and Oracle 10g I have made the following settings: 1.) Uncommented the following lines in php.ini: extension=php_oci8.dll extension=php_oracle.
-
Need some advice on how to make this Flash movie
I have 5 flash movies which are all exported swf files from Camtasia. Now I have to design a Flash movie which has 5 Icons on a blank screen which point to each of these movies. When the user clicks on one movie the exported swf from Camtasia should
-
Update 3.1 Failed - Restore error 9/13/1603/1604/1611/2002
Now I know what 13, 1603 and 1604 mean. I've solved those problems. I've gotten it to attempt a restore severa times where it appears to be preparing to upload data then the phone restarts and shows the itunes icon with the USB cable. This is when i'
-
I am using the drag a drop to create a list box. I would like to put my values in the list box. All the tutorials I've seen seem not to address the issue of drag and drop listboxes (where the list box is initialized automatically). Drag and drop list